• 한국식생활문화학회지
• /
• 제30권3호
• /
• pp.313-323
• /
• 2015

One of the main processes of tenderizing beef in Joseon Dynasty was chemical methods involving Apricot seeds, manchu cherry twig and leaves, bamboo skins, mulberry tree bark, mangsa (硭砂), salmiacum (磠砂), alcohol, fermented malt, and original honey. This study analyzed and compared the effect of broussonetia papyrifera, fermented malt, cherry trees, and mulberry tree bark from old cookbooks. Tenderizing beef with cherry trees was most effective in the experiment on shearing force, TPA, and electrophoresis of beef. According to sensory evaluation and electrophoresis test results, tenderized beef with mulberry tree bark was slightly more preferred over the method using cherry trees. However, in accordance with the above mentioned experiment, quantitative descriptive analysis showed that the most common tenderizing material was derived from morus alba powder.

• Structural Engineering and Mechanics
• /
• 제22권2호
• /
• pp.223-240
• /
• 2006

Taking into account the geometrical and material nonlinearities, an ultimate behavior of reinforced concrete cooling tower shell in hyperbolic configuration is presented. The design wind pressures suggested in the guidelines of the US (ACI) and Germany (VGB), with or without the effect of internal suction, are employed in the analysis to examine the qualitative and quantitative characteristics of each design wind pressure. The geometrical nonlinearity is incorporated by the Green-Lagrange strain tensor. The nonlinear features of concrete, such as the nonlinear stress-strain relation in compression, the tensile cracking with the smeared crack model, an effect of tension stiffening, are taken into account. The biaxial stress state in concrete is represented by an improved work-hardening plasticity model. From the perspective of quality of wind pressures, the two guidelines are determined as highly correlated each other. Through the extensive analysis on the Niederaussem cooling tower in Germany, not only the ultimate load is determined but also the mechanism of failure, distribution of cracks, damage processes, stress redistributions, and mean crack width are examined.

• Steel and Composite Structures
• /
• 제25권1호
• /
• pp.93-104
• /
• 2017

In the present work, the effect of hygrothermal aging on the glass fibre and epoxy matrix interface has been investigated by destructive and non-destructive techniques. The glass fiber reinforced polymer (GFRP) composite laminates were prepared using Vacuum Assisted Resin Infusion Molding (VARIM) technique and the specimens were immersed in simulated seawater, followed by quantitative measurement. Besides this, the tensile tests of GFRP specimens revealed a general decrease in the properties with increasing aging time. Also, exposed specimens were characterized by a non-destructive ultrasonic guided Lamb wave propagation technique. The experimental results demonstrate a correlation between the drop in ultrasonic voltage amplitude and fall in tensile strength with increasing time of immersion. Hence, the comparison of the transmitted guided wave signal of healthy vis-a-vis specimens subjected to different extents of hygrothermal aging facilitated performance evaluation of GFRP composites.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.60-66
• /
• 2005

In this paper, we propose the basic measurement method of a 3D digitizer using a CCD camera in detail. In the localization measurement with a CCD camera, the effect of the background light and the sensitivity consideration are always problems in realizing a high precision. In this research, a new measurement principle is proposed in which the pulse compression technique known in radar is used to eliminate the effect of background light even under a low intensity light source, and the coordinate values on the CCD camera image plane are determined accurately. From the quantitative evaluation of the S/N ratio improvement and the fundamental experiment, it is verified that a substantial improvement in the S/N ratio is realized for both the background noise and the pixel noise and that a resolution of less than the pixel is sufficiently possible.

• Parasites, Hosts and Diseases
• /
• 제58권5호
• /
• pp.593-597
• /
• 2020

Kudoa septempunctata have been reported as a causative agent for acute transient gastrointestinal troubles after eating raw olive flounder (Paralichthys olivaceus). It raised public health concerns and quarantine control in several countries. Quantitative evaluation on viability of K. septempunctata is crucial to develop effective chemotherapeutics against it. A cytometry using fluorescent stains was employed to assess effect of three compounds on viability of K. septempunctata. Epigallocatechin gallate reduced markedly viability of K. septempunctata at 0.5 mM or more, and damaged K. septempunctata spores by producing cracks.

• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.243-248
• /
• 2015

최근 국내에서는 도로 및 철도 터널의 건설이 꾸준히 증가하고 있으며, 교통체증 해소 및 도시계획 그리고 개량공사 등에 따라 터널이 더 깊은 지하에 위치하거나 장대화되고 있는 추세이다. 이러한 경우 터널 내부사고 중 인명피해에 가장 큰 위험요소인 화재사고가 발생할 경우 대형사고로 이어질 확률이 굉장히 높아진다. 본 연구에서는 정량적 위험도 분석 기법인 QRA(Quantitative Risk Analysis)를 터널에서의 방재설계에 적용하고자 국내 QRA 사례분석을 수행하고, QRA 기법의 적용 유무에 따른 비용 산출을 비교하였다. 그리고 AHP(Analytic Hierachy Process)기법을 사용하여 터널 방재시설의 위험도 저감 효과를 분석하여 터널 화재시 위험도를 낮출 수 있는 중요 인자들에 대한 우선순위를 제시 하였다. 그 결과로부터 QRA가 적용된 사례에서 상당한 비용절감 효과가 나타났으며, 그로 인해 합리적인 방재시설의 설계가 가능할 것으로 판단하였다. 그리고 방재시설별 비용대비 위험도 저감효과를 통한 방재시설 우선순위는 송수관설비, 비상조명, 대피통로, 제연설비의 순으로 분석되었다.

• 대한환경공학회지
• /
• 제32권2호
• /
• pp.121-130
• /
• 2010

산성광산배수(Acid Mine Drainage; AMD)는 낮은 pH조건에서 중금속 및 황산염이온 등이 다량 용존되어 환경오염 문제를 발생시킨다. 국내의 폐광산 일부에서는 산성광산배수를 처리하기 위해 정화시설이 운영되고 있으나 여전히 주변 하천에 영향을 미치고 있다. 본 연구는 산성광산배수 및 영향을 받는 하천에서 지표미생물의 특이적 유전자를 실시간 정량 중합효소 연쇄반응(Real-time quantitative Polymerase Chain Reaction; Real-time qPCR)을 이용하여 확인 및 정량함으로써 광산배수의 환경영향을 미생물학적으로 판단하고자 수행되었다. 지표 종으로 선정한 미생물은 16S rRNA 미생물 군집분석 결과 발견된 미생물 중 철환원균인 Rhodoferax ferrireducens T118, Acidiphilium cryptum JF-5이며 이 외에 기존에 광산에 존재하는 것으로 알려진 미생물 중 호산성 황환원균인 Desulfosporosinus orientus, 철산화균인 Leptosprillum ferrooxidans, 철 및 황산화균인 Acidothiobacillus ferrooxidans이었다. 최종적으로, 본 연구에서 각 광산의 광산배수가 하천에 미치는 영향을 정량적으로 판단하여 비교하기 위해 광산배수로 인한 하천에서의 미생물 변동 지수를 산정하였으며 연구 대상 4개 광산 중 광산배수 처리시설이 없는 삼탄의 광산배수의 경우 주변 방류 하천으로의 미생물학적 환경영향이 가장 큰것으로 나타났다

• 생약학회지
• /
• 제31권2호
• /
• pp.130-141
• /
• 2000

The dried roots of Rehmannia glutinosa (RG) have been used in the traditional medicine for treatment of diabetes, fever and dysuria, etc. In order to investigate the quality evaluation of the dried roots of RG, we conducted the physico-chemical and biological evaluation method. The amount of catalpol from commercial samples is very diverse about $0.00{\sim}3.89%$ by using HPLC method, because it is easily decomposed by processing of RG. So, we should try to identify the correlation with the contents of catalpol and biological activities of RG. We chose 3 samples which were a wide difference of catalpol contents between each sample (Sample-I; 3.4%, Sample-II; 2.8%, Sample-III; 0.05%). Sample-I and Sample-II were found to be more effective than Sample-III on the DPPH free radical scavenging effect and inhibitory effect on $H_2O_2-catalyzed$ lipid peroxidation in rat liver in vitro. And, Sample-I and Sample-II exhibited more significant effects than Sample-III on accelerating actions of the small and large intestinal transport, and diuretic action in mice. So, it is suggested that the quantitative determination of catalpol should be required for the tandardization of the dried roots of RG.

• 한국의상디자인학회지
• /
• 제7권1호
• /
• pp.33-40
• /
• 2005

Gathering is method used to control fullness along a seam line. The purpose of this study was to investigate the relationship between the quantitative research and qualitative method; the effect of gather and the types of gather drape. The experimental design consists of four factors: (l) three kinds of different weight and thickness of fabrics (2) three kinds of stitch densities (3) five kinds of ratio of gathers (4) three kinds of grain directions. Therefore one hundred thirty five (135) samples were made. And utilized SPSS WIN 10.0 Package in data analysis. The results of this study were as follows; First, after frequency analysis, side height, hem line width, node depth, node count, node width accorded with these result data recording. Second, after correlation analysis, side height related with front statements. Side height and entire visual was negative correlation. Hem line width, node depth, node count with section statements was negative correlation but node width at section statements was positive correlation. Third, after $k^2$ analysis, front picture parts getting excellent evaluation were 1st side height, 3rd hem line width, 4th node depth, 3rd node count, 3rd node width. And section illustration parts getting excellent evaluation were 4th side height, 1st hem line width, 2nd node depth, 3rd node count, 4th node width.

• Asia pacific journal of information systems
• /
• 제12권3호
• /
• pp.1-20
• /
• 2002

For the last decade, some leading groups of corporations in Korea have integrated and managed their Information Systems(IS) functions. Each group established a separate System Management(SM) company to manage the IS and tried to get a synergy effect from the integration. These attempts, however, were not initiated by any one company. Rather they were group efforts. Moreover, the previous measuring tools evaluated IS with the scope of technical performance or quantitative user satisfaction using an absolute scale. Obscure criteria were used in an attempt to present improvements in IS function which were qualitatively weak. This study evaluates whether integration has been efficient and successful. For this purpose, we evaluate the performance efficiency of IS functions with Data Envelopment Analysis(DEA) methodology. In comparison with prior methods, DEA presents the rate of relative efficiency, the efficiency frontier for improving inefficiency, the degree of improvement(slack), and the guideline to construct any benchmark(reference set). For our DEA evaluation, this study selected a leading group of 23 companies in Korea. Our experimental results are as follows. First, efficiency was rated low on average. It also demonstrates that the motivation of performance efficiency of IS functions is deficient. Second, the result of the test to find the existence of economy of scale and scope shows that the growth of an organization and industrial characteristics do not affect IS performance efficiency from the perspective of user satisfaction. Finally, the comparison with other evaluation approaches informs us that DEA can be a complementary evaluation method which supports other measuring tools.