• Food Science of Animal Resources
• /
• v.32 no.4
• /
• pp.414-427
• /
• 2012

Carcass characteristics and meat quality traits as a function of endpoint months of slaughter age (26 vs 32 mon) and chiller ageing (1 vs 10 d) were evaluated for m. longissmus of 26 Hanwoo steers fed with commercial diets including whole crop barley silage. Totally twenty six Hanwoo steers for 6 mon of age that were fed until 26 mon of age constituted the short term-fed group and fed until 32 mon of age constituted long-term fed group. Carcasses were chilled for 24 h and were graded. Strip loin samples were divided into two age groups (1 d and 10 d). Long-term feeding increased carcass weight, rib-eye area, yield grade, marbling score, firmness and quality grade of the meat. The feeding for 32 mon produced tender, juicy meat (p<0.01) with lower cooking loss and higher rating score (p<0.05) than short term feeding, while other quality traits were not influenced by the length of feeding. Intramuscular fat content and oxidative stability (TBARS value) were significantly (p<0.05) higher in beef from long-term feeding however the length of feeding did not alter the fatty acid composition. Chiller aging reduced instrumental tenderness (WBSF value), improved color, sensory tenderness, acceptability and rating of beef. The results of the present study mirrors that Hanwoo steers until 32 mon of age overall improved carcass traits and palatability compared to that for 26 mon. However, from the viewpoints of economical and environmental aspects, cost of the additional feeding for 6 mon for value-adding of eating quality was relatively high and the effects in turn were limited.

• Journal of Animal Science and Technology
• /
• v.65 no.2
• /
• pp.311-323
• /
• 2023

Beef consumers valued meat quality traits such as texture, tenderness, juiciness, flavor, and meat color that determining consumers' purchasing decision. Most research on meat quality has focused on marbling, a key characteristic related to meat eating quality. However, other important traits such as meat texture, tenderness, and color have not much studied in cattle. Among these traits, meat tenderness and texture of cattle are among the most important factors affecting quality evaluation of consumers. Collagen is the main component of connective tissues.It greatly affects meat tenderness. The objective of this study was to determine significant variants and candidate genes associated with collagen contents trait (total collagen) through genome-wide association studies (GWAS). Phenotypic and genomic data from 135 Hanwoo were used. The BLUPF90 family program and GRAMMAR method for GWAS were applied in this study. A total of 73 potential single nucleotide polymorphisms (SNPs) showed significant associations with collagen content. They were located in or near 108 candidate genes. TMEM135 and ME3 genes were identified to have the most significant SNPs associated with collagen contents trait. Data indicated that these genes were related to collagen. Biological processes and pathways for the prediction of biological functions of candidate genes were confirmed. We found that candidate genes were involved in positive regulation of CREB transcription factor activity and actin cytoskeleton related to tenderness and texture of beef. Three genes (CRTC3, MYO1C and MYLK4) belonging to these biological functions were related to tenderness. These results provide a basis for improving genomic characteristics of Hanwoo for the production of tender beef. Furthermore, they could be used they could be used as an index to select desired traits for consumers.

• Journal of Animal Science and Technology
• /
• v.54 no.3
• /
• pp.209-217
• /
• 2012

The objective of this study was to assess the external and internal quality traits of eggs in wholesale egg market in Colombo, Sri Lanka and the effect of storage period in egg quality traits in the same market after receiving the eggs. First, a total of 482 fresh eggs were randomly collected from the above market and external egg quality traits were determined and recorded according to the definitions given in the Specification for Chicken Egg SLS 959:1992. After that, a total of 288 fresh eggs were randomly collected and various external and internal egg quality traits were measured and recorded according to the standard procedures over a storage period of 1, 3 and 5 d after receiving the fresh eggs to the wholesale market. Information about the shops was also collected using a pretested questionnaire. Using the recorded data, shape index, Haugh unit, albumen index and yolk index were calculated for each egg. Average weight, width, length and shape index of the eggs in the sample was 59.96 g, 4.33 cm, 5.78 cm and 75.03, respectively. Average shape index value was much closer to the standard value of 74. From the total sample 80.5% eggs had a normal and sound shape. However only 60.37% of the eggs are in the desirable quality range specified in SLS 959:1992, when the overall shell quality of the sample is considered based on shell cleanliness, defects and shape. The results of the current study indicated that eggs had significant (p<0.05) deterioration of all internal quality parameters tested with increasing storage time. However the effect was not significant (p>0.05) between the storage periods of 3 and 5 d after receiving eggs except for yolk color and yolk height. Desirable category of eggs had reduced and rejections had increased with the storage period. Main problems associated with the particular market were less space availability, higher percentages of dirty eggs, unavailability of proper packaging materials, no standard packaging system for eggs, and not implementing a standard grading system for eggs. Therefore the results of this study suggest that proper egg handling and storage conditions such as low temperature storage may be implemented to increase the proportion of desirable quality eggs in the above market.

• Journal of Animal Science and Technology
• /
• v.65 no.4
• /
• pp.865-877
• /
• 2023

Thirty Hanwoo cattle including bulls, cows, and steers (n = 10 each) were slaughtered and investigated for carcass traits (weight, meat color, fat color, yield index, maturity, marbling score, back-fat thickness, and firmness) and meat quality. The meat quality such as: pH, color, cooking loss, fatty acid, thiobarbituric acid reactive substance, warner-bratzler shear force, tensile tests, and texture profiles were analyzed on longissimus lumborum (LL) muscles of the carcasses at different aging times (3 d and 21 d). The results showed that steers and cows had higher back-fat thickness and marbling score, and a lower firmness (p < 0.001) than bulls. Bulls exhibited a lower meat quality indicating by higher cooking loss, thiobarbituric acid reactive substance content, warner-bratzler shear force and tensile test values (p < 0.01). Regarding the sensory property, the bull meat also had higher hardness, and lower tenderness, juiciness and flavor scores than the cow or steer meat (p < 0.01). Additionally, the bull meat had a higher polyunsaturated fatty acid and a lower monounsaturated fatty acid contents (p < 0.01). With increased aging time, the meat tenderness was improved in all the genders. Taken together, the present study demonstrated that the gender and aging time affected the carcass traits, fatty acid and sensory quality of beef. Postmortem aging could improve the meat tenderness of all genders especially bulls.

• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.155-165
• /
• 2022

As pork consumption increases, rapid and accurate determination of porcine carcass grades at abattoirs has become important. Non-destructive, automated inspection methods have improved slaughter efficiency in abattoirs. Furthermore, the development of a calibration equation suitable for non-destructive inspection of domestic pig breeds may lead to rapid determination of pig carcass and more objective pork grading judgement. In order to increase the efficiency of pig slaughter, the correct estimation of the automated-method that can accommodate the existing pig carcass judgement should be made. In this study, the previously developed calibration equation was verified to confirm whether the estimated traits accord with the actual measured traits of pig carcass. A total of 1,069,019 pigs, to which the developed calibration equation, was applied were used in the study and the optimal estimated regression equation for actual measured two traits (backfat thickness and hot carcass weight) was proposed using the estimated traits. The accuracy of backfat thickness and hot carcass weight traits in the estimated regression models through stepwise regression analysis was 0.840 (R²) and 0.980 (R²), respectively. By comparing the actually measured traits with the estimated traits, we proposed optimal estimated regression equation for the two measured traits, which we expect will be a cornerstone for the Korean porcine carcass grading system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.70-73
• /
• 1999

This study was conducted to ascertain the chromosomal locations and effect of quantitative trait loci (QTL) associated with the physical traits of rice (Oryza sativa L.) eating quality. One hundred sixty four recombinant inbred lines (MGRILs) of F$_{11}$ were derived from the cross between Milyang 23 (Tongil type) and Gihobyeo (japonica type). They were evaluated for six physical traits of cooked rice. Transgressive segregation was observed for all examined traits. Significant QTL were detected (LOD$\geq$2.0) in three traits, including single QTL for adhesiveness, gumminess, and chewiness of cooked rice, respectively. Phenotypic variation explained by each QTL ranged from 6.3% to 14.6%. However, no significant QTL was detected for hardness, cohesiveness, and elasticity of cooked rice. Pleiotropic effects of single QTL on different traits are observed.d.

• Food Science of Animal Resources
• /
• v.37 no.5
• /
• pp.716-725
• /
• 2017

The objective of this study was to determine the relationship between composition of muscle fiber types and meat quality traits of eight major muscles from Hanwoo steers. Longissimus lumborum (LL), psoas major (PM), semimembranosus (SM), semitendinosus (ST), gluteus medius (GM), triceps brachii (TB), rectus abdominis (RA) and superficialis flexor (SF) muscles were obtained from 9 Hanwoo steers and subjected to histochemical analysis. There were significant (p<0.05) differences in fiber number percentage (FNP) and fiber area percentage (FAP) of fiber types among these 8 major muscles. SF had the highest FNP of type I (55.9%), followed by PM (46.4%), TB (45.4%), RA (38.5%), LD (36.8%), GM (36.0%), SM (22.2%), and ST (18.8%). FAP of type IIB ranged from 9.9% in SF to 58.7% in ST. Meat quality traits, including fat content, myoglobin content, collagen content, CIE $L^*$ and $a^*$, drip and cooking loss, sarcomere length and Warner-Bratzler shear force, were all significantly (p<0.05) different among these muscles. Due to such diversities among these 8 muscles, lack of correlations were found between fiber type composition and meat quality traits. These results suggest that correlation for each individual muscle should be used to improve meat quality and profitability of retail beef cuts.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.11
• /
• pp.1594-1608
• /
• 2009

Research on barley as an animal feed started some decades ago but its utilization in animal production has been limited to countries that grow the crop extensively. Corn has been the most popular energy feed in cattle rations, but the high price of corn and the decreased supply of the grain in the international market have shifted the focus of the animal industry to other cereal crops like barley. Studies have indicated that growth performance of cattle fed barley-based diets has been generally comparable with that of those fed corn-based diets, while results for cattle fed whole-crop barley silage have been more variable. Beef from cattle fed barley-based diets has proved to be as tender and as acceptable for taste as that from animals fed other finishing diets when compared at similar growth rates and degree of finish. The barley crop contains good amounts of antioxidants like 2"O-GIV isovitexin, so from the meat science point of view, a desirable influence of these components on meat quality traits such as meat color, oxidative stability and sensory characteristics might be expected. Furthermore, the effect of the distinctive fatty acid profile of beef fed from whole-crop barley silage on sensory traits is also an important subject to be elucidated. A lot of studies have been made over past decades on the effect of barley, and especially whole crop barley, on beef cattle production and meat quality, but these data have not been collectively documented in a review. The current review re-visits previous literature to underline the effects of barley in the diet on beef quality traits and to identify areas for further studies.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.463-469
• /
• 1998

Factor analysis was applied as a multivariate statistical technique to official genetic evaluations of type classification traits for 1,265,785 Holstein cows and 10,321 sires computed from data collected between August 1982 and June 1994 in Canada. Type traits included eighteen linear descriptive traits and eight major score card traits. Principal components of the factor analysis showed that only five factors explain the information of the genetic value of linear descriptive traits for both cows and sires. Factor 1 included traits related to mammary system, like texture, median suspensory, fore attachment, fore teat placement and rear attachment height and width. Factor 2 described stature, size, chest width and pin width. These two factors had a similar pattern for both cows and sires. In constrast, Factor 3 for cows involved only bone-quality, while in addition for sires, Factor 3 included foot angle, rear legs desirability and legs set. Factor 4 for cows related to foot angle, set of rear leg and leg desirability, while Factor 4 related to loin strenth and pin setting for sires. Finally, Factor 5 included loin strength and pin setting for cows and described only pin setting for sires. Two factors only were required to describe score card traits of cows and sires. Factor 1 related to final score, feet and legs, udder traits, mammary system and dairy character, while frame/capacity and rump were described by Factor 2. Communality estimates which determine the proportion of variance of a type trait that is shared with other type traits via the common factor variant were high, the highest ${\geq}$ 80% for final score, stature, size and chest width. Pin width and pin desirability had the lowest communality, 56% and 37%. Results indicated shifts in emphasis over the twelve-year period away from udder traits and dairy character, and towards size, scale and width traits. A new system that computes fmal score from type components has been initiated.

• Food Science of Animal Resources
• /
• v.40 no.6
• /
• pp.908-923
• /
• 2020

The objective of this study was to compare tastes-related components and eating quality properties between Hanwoo steer and cow meats. Longissimus thoracis (LT) muscles with same quality grade (1⁺ grade) collected from left sides of the steer and cow carcasses were used for analyses of technological quality traits, free amino acids (FAAs), metabolites, nucleotides, fatty acids and sensory attributes. there were no differences occurring in the chemical composition (fat, protein, moisture and collagen) and technological quality traits (cooking loss, water holding capacity, shear force and color) between the two beef types (p>0.05). The cow meat exhibited significantly higher amounts of some FAAs associated with umami (e.g., glutamic acid and lysine), sweetness (e.g., proline and glutamic acid) and saltiness (e.g., histidine and glutamic acid) compared to the steer meat (p<0.05). Regarding the nucleotides, no differences occurred in all the identified nucleotides between the two beef types (p>0.05). A total of 27 metabolites were identified, however, only some compounds (e.g., acetate, creatine, creatinine, glucose and inosine, etc.) showed their significantly higher amounts in the cow meat compared with those in the steer meat (p<0.05). In terms of sensory aspects, the panelists found no differences in scores of all the eating quality traits between the two sex types of beef (p>0.05). Overall, excepts some variations in tastes-active compounds, there were no differences in the quality characteristics in general and eating quality in particular between the cow and steer meats when they were in the same quality grade.