• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.838-843
• /
• 2005

The nonlinear characteristics of a suspension is directly related to the ride quality of a passenger car. In this study, a dynamic experiment for a spring and a damper of a passenger car is performed to analyze the nonlinear characteristics using MTS 1-axial testing machine and a mathematical nonlinear dynamic suspension model based on experimental data is devised to estimate the ride quality using Billings' method. The devised nonlinear model is applied to the ride quality analysis using K factor and the effect of suspension parameters is examined. As a result, the friction between the cylinder and the piston of a damper is the most effective parameter for the ride quality of a passenger car.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.64-67
• /
• 2002

To increase the short-circuit testing capacity of distribution transformers, testing facility has been installed for KEPCO in Vi-wang. The power supply of testing facility is directly supplied from the network substation located closely. Testing can be performed up to 300 kVA for single-phase transformers, 500 kVA for three-phase transformers. Operating with this facility, the distribution company is able to maintain the reliable supply of electricity. Also the critical quality of transformers from manufacturers can be verified by short-circuit testing. This paper describes the design concept and specification of newly developed equipment and the procedure of short-circuit test.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.3
• /
• pp.224-230
• /
• 2007

This work is aimed to explore a possibility of using the generalized Lamb waves for nondestructive evaluation of the bonding quality of layered substrates. For this purpose, we prepared two sets of specimens with imperfect bonding at their interfaces; 1) TiN-coated specimens with various wear conditions, and 2) CVD diamond specimens with various cleaning conditions. A dispersion simulation performed for layered substrates with imperfect interfaces are carried out to get the characteristics of dispersion curves that can be used for bonding quality evaluation. Then the characteristics of dispersion curves of the fabricated specimens are experimentally determined by use of an ultrasonic backward radiation measurement technique. The results obtained in the present study show that the lowest velocity mode (Rayleigh-like) of the generalized Lamb waves are sensitively affected by the bonding quality. Therefore, the generalized Lamb waves can be applied for nondestructive evaluation of imperfect bonding quality in various layered substrates.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.419-430
• /
• 2021

The study aims to analyze the factors that shape patient loyalty, namely, by involving the service quality factor (SERVQUAL), hospital image, patient value, and patient satisfaction in private hospitals. This study was conducted in Makassar City, Indonesia, with a sample of 296 eligible samples from private hospitals. The sample criteria were patients with outpatient and hospitalization status. Then, this study developed 23 hypotheses to test the statistical relationship between direct, intervening and multiple-effect models. Problem-solving and research focus are carried out using a quantitative method approach with a PLS-SEM-based testing tool. The bootstrapping method is being used with the constant bootstrapping step to demonstrate the results of hypothesis testing; we find that the overall hypothesis has a positive and significant effect. The combination of testing models involving several variables shows that a patient's loyalty can be formed if a patient's satisfaction has been realized. Satisfaction can be realized if the value-customer has been felt by the patients. Therefore, the hospital image must be directly proportional to service quality. Service quality is the essence of service that directly affects customers; service quality is also the reason that shapes consumer perceptions in increasing rationalization and solid customer (patient's) decision-making.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.177-181
• /
• 2001

Nondestructive testing(NDT) is one of the fundamental tools to improve the quality of commercial and industrial products. NDT is potentially a major application of interferometry. Interferometry(ESPI, Shearography, ect) has successfully been applied in various industrial environments such as high performance aircraft, home appliance, automotive, and laminates on engine structures, etc. Today's industry demands high performance components with toughest mechanical features and ultimate safety standards. Especially in automotive and aircraft industry the development process focuses on tailor-made design and solutions to meet customer specifications. To reconcile economy, ligh-weight construction has become a key issue. Many companies are looking for new advanced NDT techniques to archive cost efficiency over the limitations of classical methods. ESPI and shearography allow a rapid, full field and 3D-measurement without contact. In this paper recent applications of ESPI and shearography for NDT are described. Advanced features of classical techniques are specified and new applications in material and component testing are presented.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.30-36
• /
• 2001

This review begins with a brief expression of aerosol capture mechanism of fibrous filter(s) and performance of particulate removing respirators. The more complicated and detailed discussion is not included in this articles. Filtration efficiency and pressure drop are introduced as quality factor ( $q_{F}$) and the way in which filtration efficiency varies with particle size is discussed. Quality factors fro filters recently certified in USA were found to be very higher than those of filters made in Korea, China and USA filters certified with old certified standards. Electrically charged filters are widely used because they have high filtration efficiency and low pressure drop, but their efficiency decreases sharply at the condition occurring wet and oil mist. A discussion is given of respirator leakage through face seal and filter media with fit testing and total inward leakage testing. Since fit factor (FF) refers to the reciprocal of the fraction of the total air entering a respirator through face seal leakage , the degree of fitting performance for respirators is expected with FF. Because respirators made in Korea had generally lower FFs than respirators made in USA, it is necessary to develope respirators that fit properly for Koreans or establish regulations for fit testing.g.

• The KIPS Transactions:PartD
• /
• v.17D no.6
• /
• pp.423-430
• /
• 2010

As software becomes large-scale and complicated, the need for Quality Assurance and management is increased and software testing is becoming more important. The main aims of software testing are not only detecting and handling the defects in the system but also investigating and managing the present system. But automatic testing tools require lots of time and efforts to detect and manage the risk in the system because test-cases used in the general automatic testing tools have the simply static information. In this thesis, the dynamic management technique for weighted testcases is designed to test the high-risk testcases preferentially by giving the testcases dynamic weight.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1561-1583
• /
• 2022

Context: Testing is one of the techniques that can assure the quality of software including the domain of Software Product Line (SPL). Various techniques have been deliberated to enhance the quality of SPL including Model-based Testing (MBT). Objective: The objective of this study is to analyze and classify trends of MBT in SPL covering the solutions, issues and evaluation aspects by using taxonomy form. Method: A Systematic Literature Review (SLR) was conducted involving 63 primary studies from different sources. The selected studies were categorized based on their common characteristics. Results: Several findings can guide future research on MBT for SPL. The important finding is that the multiple measurements are still open to improving current metrics to evaluate test cases in MBT for SPL. The multiple types of measurement required a trade-off between maximization and minimization results to ensure the testing method which could satisfy multiple test criteria for example cost and effectiveness at the same time.

• Clinical and Experimental Pediatrics
• /
• v.53 no.3
• /
• pp.273-285
• /
• 2010

Completion of the human genome project has allowed a deeper understanding of molecular pathophysiology and has provided invaluable genomic information for the diagnosis of genetic disorders. Advent of new technologies has lead to an explosion in genetic testing. However, this overwhelming stream of genetic information often misleads physicians and patients into a misguided faith in the power of genetic testing. Moreover, genetic testing raises a number of ethical, legal, and social issues. Diagnostic genetic tests can be divided into three primary but overlapping categories: cytogenetic studies (including routine karyotyping, high-resolution karyotyping, and fluorescent in situ hybridization studies), biochemical tests, and DNA-based diagnostic tests. DNA-based testing has grown rapidly over the past decade and includes preandpostnatal testing for the diagnosis of genetic diseases, testing for carriers of genetic diseases, genetic testing for susceptibility to common non-genetic diseases, and screening for common genetic diseases in a particular population. Theoretically, once a gene's structure, function, and association with a disease are well established, the clinical application of genetic testing should be feasible. However, for routine applications in a clinical setting, such tests must satisfy a number of criteria. These criteria include an acceptable degree of clinical and analytical validity, support of a quality assurance program, possibility of modifying the course of the diagnosed disease with treatment, inclusion of pre-and postnatal genetic counseling, and determination of whether the proposed test satisfies cost-benefit criteria and should replace or complement traditional tests. In the near future, the application of genetic testing to common diseases is expected to expand and will likely be extended to include individual pharmacogenetic assessments.

• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.195-202
• /
• 2002

The problem of trend change in the mean residual life is great Interest in the reliability and survival analysis. In this paper, a new test statistic for testing whether or not the mean residual life changes its trend Is developed. It is assumed that neither the change point nor the proportion at which the trend change occurs is known. The asymptotic null distribution of test statistic is established and asymptotic critical values of the asymptotic null distribution is obtained. Monte Carlo simulation is used to compare the proposed test with previously known tests.