• Korean Journal of Metals and Materials
• /
• v.46 no.5
• /
• pp.289-295
• /
• 2008

The effect of the alloy elements(Si/Mn) ratio on the coating quality including wettabilty with molten zinc, galvannealing kinetics and crater has been investigated in interstitial-free high strength steel(IFHSS) containing Si and Mn. When the Si/Mn ratio was below 0.75, IF-HSS exhibited a good wettability leading to a good galvannealed coating quality after annealing at $800^{\circ}C$ for 40s in $15%H_2-N_2$ mixed gas with dew point $-60^{\circ}C$. In contrast, the wettability and galvannealed coating quality were deteriorated in the Si/ Mn ratio above 0.75. It is shown that they have relevance to oxides forms by selective oxidation on the steel surface. The oxide particles dispersed on the steel surface with a surface coverage of below 40% resulted in good wettability and galvannealed coating quality. The oxide particle is mainly consisted of $Mn_2SiO_4$ with low contact angle in molten zinc. On the other hand, the continuous oxide layer on the steel surface, such as network- and film-type,caused to poor wettability and galvannealed coating quality. The coverage of oxide layer was above 80%, and its chemical species was $SiO_2$ with high contact angle in molten zinc. Consequently, the Si/Mn alloy ratio played an importance role in galvannealed coating quality of IF-HSS.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.23-33
• /
• 1996

The conventional monitoring of water quality constrained by time and equipment produce neither complete nor synoptic geographic coverage of pollutant distribution, transport, and water quality. To circumvent these limitations in temporal and spatial measurements, the use of remote sensing is increasingly being involved in the lacustrine environmental research. Consequently, satellite remote sensing, with its synoptic coverage, is used to obtain the eutrophication-related water quality parameters in Daecheong reservoir in this study. The approach involved acquisition of water quality samples from boats of 15 sites on 20 June 1995 and 30 sites on 18 March 1996, simultaneous with Landsat-5 satellite overpass. Regression models have been developed between the water quality parameters and Landsat Thematic Mapper(TM) digital data. The best regression model was determined based on the correlation coefficient which was higher than 0.6. As a result, satellite remote sensing can provide meaningful information on water quality parameters. The regression models developed in this study show good relationship for transparency, turbidity, SS, and chlorophyll, but not for TN and TP because their spectral characteristics are not well defined.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.6
• /
• pp.107-115
• /
• 2017

This study illustrated the process of bar structure and vegetation coverage to understand historical changes of riverbed and suppose adaptive management in Tan-chun ecological landscape reserve. The study site that lower reach of the Tan-chun are known as habitats of migratory bird and aquatic species with dynamic riverbed. Aerial photos from 2006 to 2016 and surveyed vegetation data in 2006 and 2016 were used by analysis of landscape changes and comparison of vegetation coverage. Study area is classified into 3 sites (A: straight site, B: meandering site, C: meandering and junction with Yangjae-cheon). The result showed that bar area of A and C sites gradually increased, B site decreased during 10 years. Also, ratio of bar area to vegetation coverage and level of vegetation coverage increased in all sites during 10 years. All sites seem to have experienced the terrestrialization with time. On the other hand, ratio of annual vegetation increased and ratio of perennial vegetation decreased in C site in 2016 compare to 2006. Because area of Japanese Hops (Humulus japonicas) as one type of annual vegetation increased, other vegetation could not grow up by its powerful expandability. It is time to make active adaptive management based on not only continuos monitoring but also revaluation of river conditions in order to enhance habitat quality and quantity in Tan-chun ecological landscape reserve.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1956-1959
• /
• 2021

AIS(Automatic Identification System) provides navigational information including identification, position, a ship's course and status to ground and other vessels. To obtain AIS Marine Equipment Approval Service, various requirements are required and meet the requirements International Standards. However, most of the requirements are to identify essential functions, response time, hardware requirements, and communication protocols of AIS. The requirements for the quality of SW are not sufficient or detailed, and the weight is relatively low. As role of SW grows and types become more diverse, AIS SW quality inspection is essential. In this paper, We apply eight-quality characteristics of ISO/IEC 25023 standard to improve SW coverage quality of AIS. Suggest additional AIS SW requirements based on the eight quality characteristics of ISO/IEC 25023 standard.

• The Korean Journal of Ecology
• /
• v.21 no.5_3
• /
• pp.665-673
• /
• 1998

This study was conducted to clarified the relationship between bird community and forest structure and present the counterplan for protection and management of bird community from February 1993 to July 1995 at deciduous and coniferous forest within Mt. Nam area, Seoul, Korea. DBH distribution has not significant differences in each study site. Deciduous forest had more foliage coverage in all layers than coniferous forest. Total 41 species of birds, which were 16 species of resident, 14 species of summer visitor, 4 species of winter visitor, and 7 species of passage migrant were recrded in two study sites. Leaf use rate of birds was increased the increase of coverage. The number of breeding species and pairs, breeding density, and diversity index were greater in deciduous forest than coniferous forest. The number of species and pairs on bush-nesting and foraging guild were greater than other guilds. And the nuber of species and pairs on hole nesting guild were the fewest in nesting guild. Use rate of artificial nests for improvement of habitat quality was greater in coniferous forest than deciduous forest. Maintenance of bush layer, increase of coverage and leaf layer diversity, supply of artificial nests, management of large trees, and control of natural enemy were necessary for protection and management of bird community in Mt. nam area.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.267-270
• /
• 2005

The two major concerns in skin grafting are poor color match at the recipient site and donor site morbidity. To overcome the limitations of the classic skin graft, we have used dermis graft-deepithelialized split thickness skin graft-for coverage of small to medium sized wounds. The important aspects of this methods involve the immediate return of epidermis to the donor site to overcome donor site morbidity and restoration of the epidermis at the recipient site by neo epithelization from the adjacent skin. From April of 2001 to July of 2003, the dermis graft was applied to 32 patients. Simultaneously, the regular split thickness skin graft procedure was performed in 33 patients. We compared the healing time in all patients. The scar condition was also evaluated at 2 to 12 months after operation. The entire dermis grafts were reepithelialized in 15.5 days. The skin grafted wounds were healed by 11.8 days. Regarding the donor sites, donor sites of dermis graft healed within 7.5 days. On the contrary those of regular skin graft required 12.8 days. The donor sites of the dermis graft were also superior to those of skin graft in scar quality and patient satisfaction. The dermis graft technique for wound coverage compares favorably to regular skin graft technique in both recipient and donor sites aesthetically and functionally.

• Journal of Korean Academy of Nursing
• /
• v.41 no.3
• /
• pp.423-431
• /
• 2011

Purpose: The study was designed to determine the discriminating ability of a Bayesian network (BN) for predicting risk for pressure ulcers. Methods: Analysis was done using a retrospective cohort, nursing records representing 21,114 hospital days, 3,348 patients at risk for ulcers, admitted to the intensive care unit of a tertiary teaching hospital between January 2004 and January 2007. A BN model and two logistic regression (LR) versions, model-I and .II, were compared, varying the nature, number and quality of input variables. Classification competence and case coverage of the models were tested and compared using a threefold cross validation method. Results: Average incidence of ulcers was 6.12%. Of the two LR models, model-I demonstrated better indexes of statistical model fits. The BN model had a sensitivity of 81.95%, specificity of 75.63%, positive and negative predictive values of 35.62% and 96.22% respectively. The area under the receiver operating characteristic (AUROC) was 85.01% implying moderate to good overall performance, which was similar to LR model-I. However, regarding case coverage, the BN model was 100% compared to 15.88% of LR. Conclusion: Discriminating ability of the BN model was found to be acceptable and case coverage proved to be excellent for clinical use.

• Journal of Digestive Cancer Research
• /
• v.11 no.2
• /
• pp.104-107
• /
• 2023

The Ministry of Health and Welfare of Korea has implemented various social security programs to ensure a basic standard of living and raise overall quality of life for all citizens. The Korean social security system provides social insurance, public assistance, and social welfare services. To achieve adequate drug benefits, the Drug Management Department of Health Insurance Review and Assessment Service (HIRA) implement drug management duties including drug listing, upper price limit setting, scope of benefits, and post-factum management. When a manufacturer or an importer wants to apply for National Health Insurance (NHI) coverage of the drug that has obtained safety and efficacy approval, the pharmaceutical benefit assessment committee of HIRA evaluates the drug's clinical efficacy and cost-effectiveness to determine whether or not to include the drug into the benefit package. The benefit standards for a listed drug (ingredient) are set either for the whole permitted range or a part of range with conditions. To increase the coverage rate for new drugs, the listed drugs are regularly reviewed for their value. The status of listed drugs can be adjusted or eliminated from the benefit package if the clinical efficacy turns out to be insignificant. Therefore, through these pharmaceutical management procedures, high-quality drugs are provided at reasonable prices, which save healthcare expenditure by price determination and selective coverage in consideration of economic evaluation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.4
• /
• pp.922-937
• /
• 2024

Maritime activities are on the rise, there is a growing demand for high-quality communication services that can cover larger areas. However, the transmission of high data rates to maritime users is challenging due to path loss from land base stations, which limits the transmission power. To overcome this challenge, researchers have been exploring the use of buoys in a marine environment as relays for communication technology. This paper proposes a simulation-based approach to investigate the impact of various beamwidths on communication performance when using a buoy as a relay. The objective is to determine the optimal beamwidth that yields the highest data rate for the target location. The approach is based on an offshore wave model where the direction of the buoy changes according to the height of the wave. The study investigates the performance of the relay in the downlink situation using receive beamforming, and the capacity at the user in the three-hop situation is verified using an amplify-and-forward (AF) relay that uses transmit beamforming to the user. The simulation results suggest that the beamwidth of the relay should be adjusted according to the wave conditions to optimize the data rate and relay position that satisfies a data rate superior to the direct path to the target position. Using a buoy as a relay can be a promising solution for enhancing maritime communications, and the simulation-based approach proposed in this paper can provide insights into how to optimize beamwidth for effective communication system design and implementation. In conclusion, the study results suggest that the use of buoys as relays for maritime communication is a feasible solution for expanding coverage and enhancing communication quality. The proposed simulation-based approach provides a useful tool for identifying relay beamwidths for achieving higher data rates in different wave conditions. These findings have significant implications for the design and deployment of communication systems in maritime environments.

• Journal of Applied Reliability
• /
• v.17 no.4
• /
• pp.325-331
• /
• 2017

Purpose: There is active research that improves both reliability and fatigue life of structures which widely used in the aerospace fields of defense industry. The effects of three parameters (pressure, peening time, nozzle distance) on Almen intensity and coverage will be investigated by using the experimental and analyzed data. Methods: we employed a Box-Behnken design. Additionally, to verify the validity of the optimal condition obtained from experimental results, metallurgical analyses of the shot-peened aerospace part were conducted with respect to surface morphology, residual stress. Results: Optimal shot peening condition is determined as (distance, pressure, time) by optimizing simultaneously the two responses of intensity and coverage. At the optimal peening condition the prediction interval for Almen intensity is well within the required range. And, the validity of the condition was checked by using the real aerospace aluminum alloy plate. Conclusion: Shot peening introduces significant levels of compressive residual stress and induces improves both reliability and fatigue life of structures.