• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.951-959
• /
• 2011

In this study, an OTM(on-the-move) antenna which is mounted on ground vehicles and is used for mobile communication between vehicle and satellite while moving was addressed. Since LOS(line-of-sight) of antenna should direct satellite consistently while vehicle moving to guarantee high satellite communication quality, active antenna LOS stabilization is a core technology for OTM antenna. Stabilization of a satellite tracking antenna which consists of 2-DOF gimbals, an elevation gimbal over an azimuth gimbal, was considered in this study. In consideration of driving mechanism which consists of gear train and flexible driving shafts, a two-mass-system dynamic model coupled with vehicle motion was presented. An internal PI-control loop + outer PI-control loop structure has been suggested in order to damp the torsional vibration and stabilize control system. The classical pole-placement method was applied to design control gains. In addition, a vehicle motion compensation control beside of the feedback control loop has been suggested to improve LOS stabilization performances. The feasibility of the proposed control design was verified along with some experimental results.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.261-268
• /
• 2005

Recently, Many People have studied in Mobile Ipv6 to provide seamless service. FMIPv6 is designed to reduce the procedure of handover and will be used SIP, VoIP and Mobile Internet moving picture service. But, If mobile node moves fast, it will happen to packet loss and interruption problem in handover procedure. So, In this paper, designed and evaluated traffic control mechanism using WFQ scheduling to reduce the packet loss that occurred to handover procedure.

• Food Science of Animal Resources
• /
• v.40 no.1
• /
• pp.1-10
• /
• 2020

Various processing methods have a great impact on the physiochemical and nutritional properties of meat that are of health concern. Hence, the postmortem processing of meat by different methods is likely to intensify the potential effects on protein oxidation. The influence of meat protein oxidation on the modulation of the systemic redox status and underlying mechanism is well known. However, the effects of processed meat proteins isolated from different sources on gut microbiota, oxidative stress biomarkers, and metabolomic markers associated with metabolic syndromes are of growing interest. The application of advanced methodological approaches based on OMICS, and mass spectrometric technologies has enabled to better understand the molecular basis of the effect of processed meat oxidation on human health and the aging process. Animal studies indicate the involvement of dietary proteins isolated from different sources on health disorders, which emphasizes the impact of processed meat protein on the richness of bacterial taxa such as (Mucispirillum, Oscillibacter), accompanied by increased expression of lipogenic genes. This review explores the most recent evidences on meat processing techniques, meat protein oxidation, underlying mechanisms, and their potential effects on nutritional value, gut microbiota composition and possible implications on human health.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.65-71
• /
• 1998

This paper presents in-process compensation methodology to eliminate cutter runout and improve machined surface quality. The cutter runout compensation system consists of the micro-positioning mechanism with the PZT (piezo-electric translator) which is embeded in the sliding table to manipulate the radial depth of cut in real time. For the implementation of cutter runout compensation methodology. cutting force adaptive control was proposed in the angle domain based upon PI (proportional-integral) control strategy to eliminate chip-load change in end milling process. Micro-positioning control due to adaptive acuation force response improves the machined surface quality by compensation or elimination of cutter runout induced cutting force variation. This results will provide lots of information to build-up the precision machining technology.

• Animal Bioscience
• /
• v.37 no.6
• /
• pp.982-992
• /
• 2024

Objective: Jining Grey goat is a local Chinese goat breed that is well known for its high fertility and excellent meat quality but shows low meat production performance. Numerous studies have focused on revealing the genetic mechanism of its high fertility, but its highlighting meat quality and muscle growth mechanism still need to be studied. Methods: In this research, an integrative analysis of the genomics and transcriptomics of Jining Grey goats compared with Boer goats was performed to identify candidate genes and pathways related to the mechanisms of meat quality and muscle development. Results: Our results overlap among five genes (ABHD2, FN1, PGM2L1, PRKAG3, RAVER2) and detected a set of candidate genes associated with fatty acid metabolism (PRKAG3, HADHB, FASN, ACADM), amino acid metabolism (KMT2C, PLOD3, NSD2, SETDB1, STT3B, MAN1A2, BCKDHB, NAT8L, P4HA3) and muscle development (MSTN, PPARGC1A, ANKRD2). Several pathways have also been detected, such as the FoxO signaling pathway and Apelin signaling pathway that play roles in lipid metabolism, lysine degradation, N-glycan biosynthesis, valine, leucine and isoleucine degradation that involving with amino acid metabolism. Conclusion: The comparative genomic and transcriptomic analysis of Jining Grey goat and Boer goat revealed the mechanisms underlying the meat quality and meat productive performance of goats. These results provide valuable information for future breeding of goats.

• Journal of KIISE
• /
• v.42 no.11
• /
• pp.1339-1348
• /
• 2015

In a distributed system environment based on a service-oriented architecture, separate systems collaborate to achieve the goals of the entire system by using services provided other systems. A service quality violation from using one service can cause runtime system failure in the environment. The existing self-adaptation methods follow fault tolerance mechanism that responds to a failure after a service quality violation. In other words, these methods are limited to responsive action. Therefore, a service-dependability-case based self-adaptation mechanism is necessary to preserve the dependability of the self-adaptive system. This paper demonstrates that the service-dependability-case based self-adaptation mechanism is better than QoS(quality of service)-based self-adaptation with fault tolerance to preserve the dependability of the self-adaptive system. Additionally, this paper suggests a method to present and analyze service dependability by using GSN(Goal Structuring Notation) which is the existing modeling method for the presentation of assurance cases, an action mechanism adapted using an analysis result of service-dependability-cases, a methods of leveraging the service-dependability-case based self-adaptation mechanism by following the service's life cycle, and the framework architecture including the major components and the interactions between the components in the control loop of the self-adaptation process.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.461-466
• /
• 2012

Any future heterogeneous overlay network system must be able to support ubiquitous access across multiple wireless networks. To coordinate these diverse network environments, one challenging task is a call admission decision among different types of network. In this paper, we propose a new call admission control scheme to provide quality of service (QoS) while ensuring system efficiency. Based on the interplay between network structure and dynamics, we estimate the network's QoS level and adjust the service price adaptively with the aim of maximizing the network performance. A simulation shows that the proposed scheme can approximate an optimized solution while ensuring a well-balanced network performance in widely different network environments.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.117-120
• /
• 2000

As the use of real-time multimedia applications increases, a considerable amount of “greedy” UDP traffic would easily dominate network bandwidth and packet loss. As a result, bandwidth available to TCP connections is oppressed and their performance extremely deteriorates. In or-der that both TCP and UDP sessions fairly co-exist in the Internet, it is vital that we consider the fairness among both protocols. In this work, we implement a “TCP-friendly” rate control mechanism suitable to video applications and con-sider its applicability to a real system through observation of the video quality at the receiver and the connection state. It is shown that we can achieve high-quality and stable video transfer fairly sharing the network bandwidth with TCP by applying our rate control at a control interval of 32 times as long as RTT.

• Asian Oncology Nursing
• /
• v.3 no.2
• /
• pp.103-111
• /
• 2003

The purpose of this study was to identify the effect of imagery therapy on "coping mechanism and type C personality of the women with mastectomy. To achieve this purpose, 2 hours sessions of imagery therapy were given to the patients with breast cancer twice a week for 6 weeks. The period of data collection was from July, 7th to August, 12th 2002. The participants were 30 patients, 15 experimental group, 15 control group who were treated at the G University hospital in J City. This study was designed using a quasi-experimental approach with non-equivalent Pre test-Post test Design. The themes for the Imagery Therapy Program were composed of Leuner's(1969) 12 Imagery Themes: flower, green-field, stream, mountain, house, woods, significant figures, rose, lion, ideal self-image, cave and volcano. The data were analyzed with ${\chi}2-test$ and MANOVA using the SPSS program. The course of image change of the 12 imagery themes was analyzed by content analysis. The results of this study are as follows: First Hypothesis, 'The score of type C personality in the women with mastectomy who received imagery therapy will be significantly lower than that of the control group' was supported(p<.05). Second Hypothesis, 'The score of coping mechanism' in the women with mastectomy who received imagery therapy will be significantly higher than that of the control group' was rejected. In conclusion, imagery therapy is suggested as an effective nursing intervention to change type C personality of the women with mastectomy, but not effective to improve coping mechanism. Therefore, the program for the women with mastectomy should be developed to change their coping mechanism, method of problem solving and Quality of life.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2227-2236
• /
• 2017

In order to solve the neutral-point voltage fluctuation problem of three-phase three-level T-type inverters (TPTLTIs), the unbalance characteristics of capacitor voltages under different switching states and the mechanism of neutral-point voltage fluctuation are revealed. Based on the mathematical model of a TPTLTI, a feed-forward voltage balancing control strategy of DC-link capacitor voltages error is proposed. The strategy generates a DC bias voltage using a capacitor voltage loop with a proportional integral (PI) controller. The proposed strategy can suppress the neutral-point voltage fluctuation effectively and improve the quality of output currents. The correctness of the theoretical analysis is verified through simulations. An experimental prototype of a TPTLTI based on Digital Signal Processor (DSP) is built. The feasibility and effectiveness of the proposed strategy is verified through experiment. The results from simulations and experiment match very well.