• 한국통신학회논문지
• /
• 제19권12호
• /
• pp.2328-2339
• /
• 1994

ATM 전송 기술에 있어 PBS 방법은 혼재된 트래픽 환경하에서 각각의 트래픽이 서로 다른 서비스 품질을 요구할 경우, 체증 상태의 망 관리를 효율적으로 하기 위한 제시된 셀 준위의 우선 순위 제어방식이다. 이 논문에서는 시간 지연과 셀 손실에 민감한 두 트래픽에 대한 처리를 PBS 방법을 적용시켜 셀 손실에 대한 분포를 분석하고자 한다. 특히, 실시간 트래픽의 주요한 성능 척도인 연속적 셀 손실 확률을 정확하게 구하기 위한 셀 손실 간의 독립성을 가정하지 않은 재귀적 알고리듬을 사용한다. 이 방법에 의해 유도된 셀 손실에 대한 분포의 결과는 독립을 가정한 경우보다 더 심각하게 나타난다. 그리고, 실시간 트래픽에 대한 PBS 방법의 제한성과 주어진 서비스 품질 기준에 따른 허용 부하를 증가시킬 수 있음을 보여준다.

• 한국환경과학회지
• /
• 제21권3호
• /
• pp.339-349
• /
• 2012

In order to clarify the impact of emissions reductions on the air quality over Metropolitan area of Korean Peninsula, several numerical experiment and analysis of integrated process rate(IPR) of ozone were carried out. Numerical models used in this study are WRF for the estimate the meteorological elements and CMAQ for assessment of ozone concentration. As result in the sensitive test of VOC/NOx reduction experiments, although VOC reduction tends to induce the different impact on the advection and photochemical reaction rate of ozone in urban area and rural area, the mechanism of ozone appeared to be more sensitive to the reduction of VOC than that of NOx over the metropolitan and its surround area. So the control of VOC emission inventories is an effective means to decrease the ozone concentrations around this area.

• Journal of Communications and Networks
• /
• 제6권1호
• /
• pp.68-77
• /
• 2004

In the near future packet networks should support applications which can not predict their traffic requirements in advance, but still have tight quality of service requirements, e.g., guaranteed bandwidth, jitter, and packet loss. These dynamic characteristics mean that the sources can be made to modify their data transfer rates according to network conditions. Depending on the customer&; needs, network operator can differentiate incoming connections and handle those in the buffers and the interfaces in different ways. In this paper, dynamic QoS-aware scheduling algorithm is presented and investigated in the single node case. The purpose of the algorithm is in addition to fair resource sharing to different types of traffic classes with different priorities ?to maximize revenue of the service provider. It is derived from the linear type of revenue target function, and closed form globally optimal formula is presented. The method is computationally inexpensive, while still producing maximal revenue. Due to the simplicity of the algorithm, it can operate in the highly nonstationary environments. In addition, it is nonparametric and deterministic in the sense that it uses only the information about the number of users and their traffic classes, not about call density functions or duration distributions. Also, Call Admission Control (CAC) mechanism is used by hypothesis testing.

• 한국세라믹학회지
• /
• 제12권1호
• /
• pp.16-22
• /
• 1975

The network structure of a glass is known to be cracked by a chemical reaction, diffusion, and ion exchange of alkali ion, formed at the crack tip of the glass surface, when water is present on the glass surface. Since the durability of glass is reduced, due to the fatigue phenomenon mentioned above, pollution problem of glass goods, especially bottle glass, is becoming acute gradually. A static fatigue phenomenon was studied thermodynamically in this paper, and a mechanism of static fatigue, a quality control, and a method of preventing pollution for the main local glass goods were also investigated. The PH of reacted solution and the quantity of extracted alkali were measured at different conditions such as temperature, reacting time, particle size of a crushed glass sample, and the nature of reacting solution. The enthalpy change was calculated from the Arrhenius equation. The results are given below; 1) The absolute value of enthalpy change for the bottle glass was found to be higher than the for the flat glass. 2) The fatigue phenomenon of a glass was more sensitive to the temperature than to the reacting time. 3) The durability of glass in acid solution is stronger than in alkaline solution. 4) The substance which cracks the network structure of glas is considered the hydroxyl ion.

• Journal of information and communication convergence engineering
• /
• 제2권1호
• /
• pp.9-14
• /
• 2004

In this paper the modeling of the RLP layer in CDMA2000 is presented, which uses the NAK based ARQ scheme for Random Error Channels. The RLP performs a partial link recovery through limited number of RLP frame transmission in case of frame error. In case when the RLP fails due to excessive frame error, the control is passed on to the higher (TCP) layer. The TCP layer provides the complete end-to-end recovery. Thus the reliable performance at the TCP/RLP is essential to maintain the required Quality of Service in the DS-CDMA wireless links. The modeling is done for the performance analysis of the system in terms of the throughput and the mean extra delays, which are calculated analytically and are compared with the results generated by the simulations. This paper studies the effect of the random errors over different types of RLP frame formats and also the performance of the NAK based ARQ mechanism used under these conditions. The simulation provides with the over all characteristics of the throughput and the mean extra delay in terms of realistic environment parameters like Eb/No and probability of packet error (PE), based on the channel conditions.

• Nuclear Engineering and Technology
• /
• 제41권6호
• /
• pp.849-858
• /
• 2009

Risk caused by safety-critical instrumentation and control (I&C) systems considerably affects overall plant risk. As digitalization of safety-critical systems in nuclear power plants progresses, a risk model of a digitalized safety system is required and must be included in a plant safety model in order to assess this risk effect on the plant. Unique features of a digital system cause some challenges in risk modeling. This article aims at providing an overview of the issues related to the development of a static fault-tree-based risk model. We categorize the complicated issues of digital system probabilistic risk assessment (PRA) into four groups based on their characteristics: hardware module issues, software issues, system issues, and safety function issues. Quantification of the effect of these issues dominates the quality of a developed risk model. Recent research activities for addressing various issues, such as the modeling framework of a software-based system, the software failure probability and the fault coverage of a self monitoring mechanism, are discussed. Although these issues are interrelated and affect each other, the categorized and systematic approach suggested here will provide a proper insight for analyzing risk from a digital system.

• Journal of Welding and Joining
• /
• 제30권4호
• /
• pp.38-43
• /
• 2012

Using a fiber laser heat source, an oil pressure sensor was fabricated to measure the pressure in commercial vehicles. A stepping motor was used for the rotational and translational motion in the diaphragms and hardware joining. Laser welding process algorism including shielding gas control and vision system was integrated by using LabVIEW software for the high quality welding and in-line monitoring purpose. For the maximum flexibility in pressure transmission to the pressure sensor, thin sheet metal diaphragm, $25{\sim}50{\mu}m$(SUS-316L), was used and the diaphragms were optimally designed with FEM analysis. The welded samples were cross-sectioned the observation showed that the maximum depth ratio was more than seven times of diaphragms. The maximum welding speed was measured to be as high as 50in/mm by the developed automation mechanism. The fabricated prototypes were tested for the proof pressure, spring constant and sealing. The FEM results of spring constant measurement was as accurate as up to 80% of the design value and the sensor was safely operated up to the nominal pressure of 10bars.

• 열처리공학회지
• /
• 제3권2호
• /
• pp.10-19
• /
• 1990

The tempering behavoirs of 0.45% carbon steel treated by automatic progressive high frequency induction hardening equipment have been investigated. In order to examine the correlation of hardness with both tempering temperature and time, simple regression analysis has been made using the statistical quality control package. The maximum surface hardness value of induction hardened zone and its effective hardening depth have been determined to be Hv 810 and 0.76mm, respectively. The hardness obtained after tempering has been shown to vary lineary with tempering time at six different temperatures. The activation energies during tempering have been calculated to be 25.34kcal/mole, 32.73kcal/mole and 49.24kcal/mole for HRcs 60, 50 and 40, respectively, showing that tempering process occurs by a complex mechanism, The tempering hardness equation of $H=90.113{\sim}4.531{\times}10^{-3}$ [T(11.996+log t)] has proved to be in a reasonably good agreement with experimently determined data and it is also expected to be useful for the determination of tempering treatment conditions to obtain a required hardness value.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권1호
• /
• pp.19-25
• /
• 2002

The objectives of this study were to understand the possible mechanism of duck sperm toxicity induced by arsenic exposure in vivo, and to investigate the roles of the antioxidant L-ascorbic acid in ameliorating the arsenic-induced sperm impairment. To test the acute toxicity, the percentages of mortality of mature drakes treated with different concentrations of trivalent sodium arsenite, As (III), and pentavalent sodium arsenate, As (V) were measured. The LD50 value of As (III) for mature drakes was $4.89{\pm}1.49$ ppm. Although As (V) didn't cause any deaths even at a concentration of 40 ppm, the chronic toxicity of As (V) on sperm quality was shown by a decreased fertilization rate. When the concentrations of As (V) were above 0.4 ppm, fertilization rates were lower than those of 0.04 ppm and control. Drakes treated with 40 ppm of As (V) had the highest malondialdehyde (MDA) level in the testis tissue, $3.100{\pm}0.218{\mu}mole/g$ testis. This showed that 40 ppm of As (V) significantly induced lipid peroxidation in testis tissue. For the 1.2 ppm As (III) treatment, several significant effects were observed: (1) sperm motility was decreased most dramatically by $52.0{\pm}9.1$% after three days of incubation; (2) fertilization rate of artificially inseminated semen was the lowest, $26.4{\pm}15.4$; (3) the MDA concentration in testis tissue, $7.846{\pm}0.246{\mu}mole/g$ testis, was significantly higher than the others (p<0.05); (4) the sperm number, $1.17{\pm}0.40({\times}10^9)$, was significantly lower than with the 60 ppb and control treatments (p<0.05); (5) a black appearance and soft texture was observed in the testis tissue. The antioxidant L-ascorbic acid administered along with 1.2 ppm As (III) decreased the toxicity of arsenic. The ameliorating effects included: improved sperm motility, increased sperm number and fertilization rate, and decreased MDA concentration in the testis tissue. This study suggests that the toxicity of the trivalent arsenic on sperm quality is partly from free radicals generated by its metabolic pathway, and the antioxidant ascorbic acid ameliorates arsenic-caused sperm impairment.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.61.1-61.1
• /
• 2010

$CuIn_{1-x}-GaxSe_2$ based materials with direct bandgap and high absorption coefficient are promising materials for high efficiency hetero-junction solar cells. CIGS champion cell efficiency(19.9%, AM1.5G) is very close to polycrystalline silicon(20.3%, AM1.5G). A reduction in the price of CIGS module is required for competing with well matured silicon technology. Price reduction can be achieved by decreasing the manufacturing cost and by increasing module efficiency. Manufacturing cost is mostly dominated by capital cost. Device properties of CIGS are strongly dependent on doping, defect chemistry and structure which in turn are dependent on growth conditions. The complex chemistry of CIGS is not fully understood to optimize and scale processes. Control of the absorber grain size, structural quality, texture, composition profile in the growth direction is important to achieving reliable device performance. In the present work, CIS nanoparticles were prepared by a simple wet chemical synthesis method and their structural and optical properties were investigated. XRD patterns of as-grown nanopowders indicate CIS(Cubic), $CuSe_2$(orthorhombic) and excess selenium. Further, as-grown and annealed nanopowders were characterized by HRTEM and ICP-OES. Grain growth of the nanopowders was followed as a function of temperature using HT-XRD with overpressure of selenium. It was found that significant grain growth occurred between $300-400^{\circ}C$ accompanied by formation of ${\beta}-Cu_{2-x}Se$ at high temperature($500^{\circ}C$) consistent with Cu-Se phase diagram. The result suggests that grain growth follows VLS mechanism which would be very useful for low temperature, high quality and economic processing of CIGS based solar cells.