• 웰빙융합연구
• /
• 제7권4호
• /
• pp.1-13
• /
• 2024

Purpose: The purpose of this study is to develop a highly accurate mobile air quality monitoring system suitable for use in various event-specific locations, such as fireworks festivals or construction sites. Research design, data and methodology: The study focuses on optimizing the selection and design of equipment for a mobile air quality monitoring system, aiming to reduce production costs and improve measurement accuracy. It includes a comparative analysis with existing Air Quality Monitoring Stations (AQMS) and enhances calibration methods to stabilize performance under various environmental conditions. This approach ensures a cost-effective, accurate, and efficient mobile air quality monitoring system. Results: By utilizing measurement data collected from various regions, further improvements can be made in the future to develop a more efficient and accurate mobile air quality monitoring system. The accuracy of the existing mobile air quality monitoring system has been enhanced through this study, making it applicable for measurements in various fields. Conclusions: With the growing concern about air pollution, a mobile air quality monitoring system could be effectively utilized in areas where event-based air pollution occurs, such as firework festivals or construction sites. In the future, by utilizing data from various regions, further improvements and enhancements can be made to the system, leading to a more efficient and accurate mobile air quality monitoring system.

• 품질경영학회지
• /
• 제24권3호
• /
• pp.111-132
• /
• 1996

Taguchi's parameter design is to determine optimal settings of design parameters of a product or a process such that the characteristics of a product exhibit small variabilities around their target values. His analysis of the problem has focused only on a single characteristic or response, but the quality of most products is seldom defined by a characteristic, and is rather the composite of a great number of characteristics which are often interrelated and nearly always measured in a variety of units. The critical problem in dealing with multiple characteristics is how to compromise the conflicts among the selected levels of the design parameters for each individual characteristic. In this paper, the EXTOPSIS Model using SN ratio which can be optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal compromise among several different response variables is developed. Two existing case studies are solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, and the desirability function.

• 한국IT서비스학회지
• /
• 제11권4호
• /
• pp.153-170
• /
• 2012

When companies or institutes manage data, in order to utilize it as useful resources for decision-making, it is essential to offer precise and reliable data. While most small and medium-sized enterprises and public institutes have been investing a great amount of money in management and maintenance of their data systems, the investment in data management has been inadequate. When public institutions establish their data systems, inspection has been constantly carried out on the data systems in order to improve safety and effectiveness. However, their capabilities in improving the quality of data have been insufficient. This study develops an automatic tool to diagnose the quality of data in a way to diagnose the data quality condition of the inspected institute quantitatively at the stage of design and closure by inspecting the data system and proves its practicality by applying the automatic tool to inspection. As a means to diagnose the quality, this study categorizes, in the aspect of quality characteristics, the items that may be improved through diagnosis at the stage of design, the early stage of establishing the data system and the measurement items by the quality index regarding measurable data values at the stage of establishment and operation. The study presents a way of quantitative measurement regarding the data structures and data values by concretizing the measurement items by quality index in a function of the automatic tool program. Also, the practicality of the tool is proved by applying the tool in the inspection field. As a result, the areas which the institute should improve are reported objectively through a complete enumeration survey on the diagnosed items and the indicators for quality improvement are presented quantitatively by presenting the quality condition quantitatively.

• 한국습지학회지
• /
• 제19권4호
• /
• pp.393-402
• /
• 2017

본 연구는 바이오파크 유역 내 인공습지에 대하여 습지규모와 수질개선효과의 관련성을 분석하여, 최적의 습지규모 설계를 위한 기초 자료를 제공하기 위하여 수행되었다. 본 연구를 통해 인공습지에 대한 합리적인 규모 설계 및 운영에 기여할 것으로 판단되며, 연구결과를 통해 다음과 같은 결론을 얻었다. 인공습지의 0-100 % 증설범위의 설계별 시나리오 분석결과, '기존규모 대비 75 % 증설'의 경우, '기존규모의 현 상태 운영' 설계 기준과 비교하여 수질이 BOD5는 66.7 %, TSS는 69.9 %, T-N은 64.7 %, T-P는 85.5 %, Chl-a는 51.8 % 만큼 개선되어 가장 양호한 효과를 보여주었으며, 특히 4계절 중 여름철에 Chl-a를 제외한 수질항목에서 효과가 크게 나타나는 경향이었다. 그리고 설계규모와 수질개선 효과간 정비례관계가 성립되지 않은 것으로 나타났다.

• 품질경영학회지
• /
• 제48권3호
• /
• pp.381-393
• /
• 2020

Purpose: The purpose of this study was to find useful solutions by analyzing causes and results about defects on mechanical drawing notes and provide an automated tool with solutions to mechanical engineers. Methods: The collected data for defects on mechanical drawing notes were from ongoing development and mass production projects. Various measurement methods were used based on the Lean 6 Sigma analysis such as Process analysis, C&E diagram and some statistical analysis. Results: The results of this study are as follows; The results of the Lean 6 Sigma analysis, the validity of the selected indicators for improving drawing notes quality was verified through the verification of cause variables. The strategy established to improve the mechanical drawing notes was reflected as an automated program, and the defects were within a manageable range and achieved target Sigma level. Conclusion: Through the application of the "Mechanical drawing notes automation tool", it is expected to resolve the "Voice of Customer, VOC" and "Voice of Business, VOB".

• 품질경영학회지
• /
• 제27권2호
• /
• pp.218-236
• /
• 1999

The purpose of parameter design is to determine optimal settings of design parameters of a product or a process such that the performance characteristics of a product exhibit small variabilities around their target values. Taguchi made significant contributions in this area. However, his analysis of the problem focused on only one performance characteristic or response, although in product and process design, multiple characteristics are more common. The critical problem in dealing with multiple characteristics is how to compromise the conflict among the selected levels of the design parameters for each individual characteristic. In this paper, Methodology using SN ratio optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal balance among several different response variables is developed. Existing case studies are solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, the desirability function, and EXTOPSIS model.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.503-506
• /
• 2004

Evolutionary operation is useful to improve on-line full-scale manufacturing processes by systematically changing the levels of the process variables without jeopardizing the product. This paper presents a system design for an evolutionary operation software called 'evolutionary optimizer'. The system design is based primarily on data flow diagram. Evolutionary optimizer consists of four modules: factorial design module, many variables module, mixture Production module, and mean/dispersion module.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.103-108
• /
• 2004

This paper will describe integrated system design process and its application. Integrated design process is performed activities concurrently and sequentially for product development. For a group of activities to be truly integrated, the flow of deliverables among them must be well defined, and committed to. For this purpose, the study will suggest procedure that is executed context analysis of standard process, interface definition from activity decomposition, integration of related activities, and definition of concurrency & sequential activities flow, This procedure and method will contribute to minimize time loss that is emerged from activities iteration by not definitely definition of activities interface.

• 패션비즈니스
• /
• 제7권5호
• /
• pp.32-44
• /
• 2003

In apparel industry, the worksheet or product specification document has the function of products design. Drawing up worksheet exactly is important to quality control of apparel products. Every company needs to manage the product data of design-centric to establish TQM environment. In order to control the quality data of design-centric, an apparel worksheet system was developed by using the function of product data management system.

• 한국CDE학회논문집
• /
• 제13권2호
• /
• pp.139-152
• /
• 2008

In order to survive worldwide competition, today's industries are experiencing strong pressure to introduce higher quality products with lower cost and shorter lead-time. Therefore, the role of design in the process of product development is increasing in significance. In this research, two methods for improving the design capability are proposed: construction of design environment and design automation using 3D CAD system. The designers and design process are the core of product design using 3D CAD system. In order to maximize the design performance, construction of the design environment including selection of a suitable system, designer training for best use of the system, establishment of an efficient design process, and stabilization of the environment are required. A method is suggested to construct design environment by systematizing the contents of the projects and consulting experiences carried out for various categories of business such as electronic devices, motorcycles, electricity parts, sanitary wares, injection molds, and die casing molds. Design automation helps reduce tedious and time-consuming jobs, simplify complicated and error-prone modeling and drawing works to shorten the lead time and improve the product quality. To develop a design automation system, understanding the process and the related knowledge on design are very important before implementing the system using API provided by 3D CAD system. In this research, an eight-step procedure is proposed for the development of a design automation system. These eight steps are analysis of needs, determination of specification, verification of specification using 3D CAD system, inspection of related API functions, programming, field test, application in practice, and maintenance. A case study in which five design automation systems in the design of turbine generators using the proposed method is introduced in detail. These systems play important roles in the generation of various output items including 3D models, drafts, material information, and NC data. The case study shows how effectively the design time is reduced and the quality improved using those systems.