• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.115-123
• /
• 2009

Integrated information to water quantity and quality is essential for planning water resources management as well as operating water-related infrastructures. Because data collection process including monitoring and maintenance is separated in different governmental agencies in Korea, integrating quantity and quality may provide effective and better management implementation. In this study, a number of suggestions regarding integration of water monitoring were concluded in terms of technological, legal and institutional implications. First, it is necessary to discuss national water monitoring plan, national water information management plan, agreement of standard terms of monitoring between ministries, and to revise the law(river law and water quality management law). Present stations for water monitoring should be used for both of quantity and quality monitoring. If station is newly installed or relocated, it is better that one single agency maintain monitoring frequency and data management as well. In addition, a monitoring protocol need to be agreed by each of parties. In order to develop integrated monitoring system, quality assurance of the collected data should be properly maintained. Since many purposes haven been concerned using of data analysis and assessment so far, it may not be easy to integrate water quantity and quality monitoring in a short period. However, the alternatives including enhancing institutional regulations and programs, advanced technology may promote an efficient integrated water monitoring.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.218-232
• /
• 2015

Piecewise linear (G01-based) tool paths generated by CAM systems lack $G_1$ and $G_2$ continuity. The discontinuity causes vibration and unnecessary hesitation during machining. To ensure efficient high-speed machining, a method to improve the continuity of the tool paths is required, such as B-spline fitting that approximates G01 paths with B-spline curves. Conventional B-spline fitting approaches cannot be directly used for tool path B-spline fitting, because they have shortages such as numerical instability, lack of chord error constraint, and lack of assurance of a usable result. Progressive and Iterative Approximation for Least Squares (LSPIA) is an efficient method for data fitting that solves the numerical instability problem. However, it does not consider chord errors and needs more work to ensure ironclad results for commercial applications. In this paper, we use LSPIA method incorporating Energy term (ELSPIA) to avoid the numerical instability, and lower chord errors by using stretching energy term. We implement several algorithm improvements, including (1) an improved technique for initial control point determination over Dominant Point Method, (2) an algorithm that updates foot point parameters as needed, (3) analysis of the degrees of freedom of control points to insert new control points only when needed, (4) chord error refinement using a similar ELSPIA method with the above enhancements. The proposed approach can generate a shape-preserving B-spline curve. Experiments with data analysis and machining tests are presented for verification of quality and efficiency. Comparisons with other known solutions are included to evaluate the worthiness of the proposed solution.

• Journal of Korean Academy of Nursing
• /
• v.24 no.2
• /
• pp.313-318
• /
• 1994

To build a suitable National Health Care System for the coming 21s1 century, Nursing must also be renewed. The future Korea will be united and the majority of its population will raidly consist of the aged. Economically standing on the same level with developed countries the growth of scientific technologies will foster communications, firing astounding changes in the medical field. While the overall life style pattern of Koereans not to mention the structure of diseases undergo change, the possibility that the reckless induction of high-tech health care may only cause medical fees to eascafate. It can전so be expected that the health care system will evolve towards the consumers. Nursing in the 21s1 century will be of two scenarios according to WHO, which presents the role of the nurse. The first scenario is that "a gen-eric health care work force" namely a "care giver" will replace all other health professions. If Nursing does not become the compatent profession fitting to this purpose it will eventually dei out. The second scenario is that nurses who are educated in a well grounded and extensive general background and have command of a specialized area will undertake services varying from health pro-motion to treatment and rehabilitation both direct and indirectly, while supervising other personnel. The nurse here would become the "care giver". To become the necessary health care profession in the 21s1 century, nurses should be provided with more educational opportunities, variating in its con-tents, course, and system, enabling them to grow. Clair Faign points out that the minimal educational entry for the nursing profession is a 4 year undergraduate education in this aspect, now in the time to set the future of Nursing into the course of the first scenario. A new educational system stipulating a baccalaureate nursing degree is in urgent need, and aside from govermental actions nurse themseives should formaily officiallze this process, striving for quality assurance. While considering 6 years nursing education programs, multifarious degree courses for existing 3 years educated nurse should be provided Junior nursing schools must devise measures to grow into baccalaucate institutions, also. Among the existing courses, the Self Study Degree Program should be converted into RN, BSN courese provided by universities, and clinical training for the University on the Air must be supplimented, The possibility of establishing nursing courses into commercial high school programs only jeopardizes the development of the nursing profession.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.768-770
• /
• 2015

We performed integration and standardization of the omics data related agriculture. To do this, we requires progressed computational methods and bioinformatics infrastructures for integration, standardization, mining, and analysis. It makes easier biological knowledge to find. we potentialize registration a row and processed data in NABIC (National Agricultural Biotechnology Information Center) and its processed analysis results were offered related researchers. And we also provided various analysis pipelines, NGS analysis (Reference assembly, RNA-seq), GWAS, Microbial community analysis. In addition, the our system was carried out based on the design and build the quality assurance in management omics information system and constructed the infrastructure for utilization of omics analyze system. We carried out major improvement quality of omics information system. First is Improvement quality of registration category for omics based information. Second is data processing and development platform for web UI about related omics data. Third is development of proprietary management information for omics registration database. Forth is management and development of the statistics module producers about omics data. Last is Improvement the standard upload/ download module for Large omics Registration information.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.41-43
• /
• 2005

Purpose : Wish to present degree management process that is efficient confirm radiation treatment exclusive use CT simulator's Q.A item that become Q.A and Differentiation of diagnosis area that present Report of the AAPM Task Group No.66 using Q.A tool that produce itself and secure safe and correct CT-simulation process and equip convenience. Method and material : Manufacture CT simulator's Q.A tool on source and confirm virtue between isocenter of wall laser system, patient table, CT scanner's imaging plane that present in Report of the AAPM Task Group No.66 by daily publication unit. Result : Confirmed measured value from Report of the AAPM Task Group No.66 to confirmation of presenting degree management item in wall laser's ${\pm}2mm$, table's ${\pm}2mm$, imaging plane's ${\pm}2mm$ tolerance extent. Conclusion : There is unconfirmed item from CT-simulation process for therapy to CT Q.A protocol of existent diagnosis area, premising suitable degree management of radiation treatment exclusive use CT-simulator equipment confirming presenting Q.A item in Report of the AAPM Task Group No.66 safe and correct CT-simulation process guarantee can

• Analytical Science and Technology
• /
• v.20 no.3
• /
• pp.183-192
• /
• 2007

The various environmental regulation directives such as RoHS (restriction of hazardous substances in electrical and electronic products) and WEEE (waste from electrical and electronic equipments) are practically used as the technical barrier in international trade (TBT) of vehicles and electrical and electronic products recently. Regarding such an environmental regulation, Korea Research Institute of Standards Science (KRISS) organized a proficiency testing scheme to establish the reliability of measurement results produced by the relevant research institutes and test laboratories in Korea. Participants were 31 laboratories related to production of the electrical and electronic equipments and mobile vehicles. Two polypropylene samples of pellet type were employed as the proficiency testing materials (PTMs). Cadmium and lead were the analytes chosen among six components regulated in European Union (EU) RoHS directive. The PTMs were sent to the participants by post on September $1^{st}$ 2006, and deadline for results submission were October $10^{th}$ 2006. The results of each laboratory were evaluated in comparison with KRISS reference values using Robustic Z-score and Youden plot methods. The results of the various sample digestion methods were also compared. Most of participants reported good agreement within 10 % range of reference values. However, results from several laboratories showed significant biases from reference values. These laboratories should establish the quality assurance system for improvement of the measurement reliability.

• Hwankyungkyoyuk
• /
• v.10 no.2
• /
• pp.311-324
• /
• 1997

General citizens can be a valuable resource for various types of environmental monitoring when they are well-trained and managed. Successful use of volunteer monitors depends on understanding that citizens are partners sharing expanded roles as the guardians of their local environment. Citizen volunteer monitoring programs are developed for three reasons: 1) to supplement environmental data collected by professional staffs in governmental agencies and scientific institutions; 2) to educate the public about local environmental problems; 3) to build a constituency of citizen to practice sound environmental management at a local level and build public support for environmental protection. All three goals can be achieved with a well-organized program which provides useful and credible data. Initial step in planning a successful volunteer monitoring project is to clearly identify the use to be made of the data. Technical advice from the identified potential user groups should be convened early in the planning stage to refine the program objectives and determine if volunteers can provide the level of expertise required. Data users must have confidence in the representativeness, consistency, and accuracy of data collected by volunteers. Effective quality assurance and quality control(QA/QC) procedures are essential to ensure the utility of environmental monitoring data. Volunteers must be trained in advance to carry out specific environmental monitoring tasks. Another components of successful volunteer monitoring programs is to give the volunteers praise and feedback as well as to encourage experienced volunteers to impose increased responsibilities. The increase of volunteer monitoring programs in Korea will play a major role in developing a participatory system in which the people are "empowered" to make decisions and make a difference.

• Journal of Environmental Health Sciences
• /
• v.35 no.4
• /
• pp.322-333
• /
• 2009

In this study, a measurement method was evaluated for the determination of polycyclic aromatic hydrocarbons (PAHs) in the ambient atmosphere. PAHs were sampled by high-volume samplers, and were then analysed with a GC/MS system. Particulate PAHs were collected on $8"{\times}10"$ quartz fiber filter, while vapor phase PAHs were adsorbed on polyurethane foam (PUF). Target compounds included a total of 36 PAHs, which are known to be frequently detected in the urban atmosphere. It was not necessary to clean-up samples before samples were analyzed using GC/MS, and the overall performance of the method was tested by a variety of quality control and quality assurance schemes. It is generally known that the clean-up procedure can negatively affect the recovery of samples. Precision and accuracy was evaluated using SRM provided by US NIST, and the results were generally satisfactory and reliable. However, the GC/MS method appeared not to be adequate for 6-rings PAHs, such as coronene, due to its lower sensitivity. In addition, collection efficiencies for low molecular compounds, such as 2-rings PAHs, were poor because of the lower retention volume of the PUF adsorbent. As a result, it was concluded that the method based on high-volume sampling and GC/MS analysis can give very reliable data by simultaneous sampling of both particulate and vapor phases for 3-rings to 5-rings PAHs of environmental concern.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.4
• /
• pp.21-25
• /
• 2014

In order to develop 2nd generation (2G) high-temperature superconducting (HTS) wires as commercial products, it is necessary to perform a high speed investigation of their superconducting performance. Room-temperature and non-contact optical scanning tools are necessary to verify the microstructure of the superconducting materials, the current flow below the critical temperature, and the critical current density. In this paper, we report our results of an inspection of the electrical transport properties of coated conductors. The samples that we used in our study were highly qualified rare-earth based coated conductors produced via co-evaporation, and $SmBa_2Cu_3O_{7-y}$ (SmBCO) was the superconducting materials used in our studies. A film grown on IBAD-MgO templates shows larger than 400 A/cm at 77 K and a self-field. The local transport properties of the films were investigated by room-temperature imaging by thermal heating. The room-temperature images show structural inhomogeneities on the surface of the films. Bolometric response imaging via low-temperature bolometric microscopy was used to construct the local current mapping at the surface. These results indicate that the non-uniform regions on the surface disturb the current flow, and laser scanning images at room-temperature and at a low-temperature suggest a correlation between the structural properties and transport properties. Thus this method can be effective to evaluate the quality of the coated conductors.

• Industrial Engineering and Management Systems
• /
• v.8 no.2
• /
• pp.109-120
• /
• 2009

As the use of 3DCAD data became widespread in designing products in manufacturing, attempts have been made to shorten lead time and reduce cost of production preparation utilizing 3DCAD data for launching assembly lines. In order to create assembly plans not only efficient but easy for operators to operate ('easy-to-operate'), this study presents approaches, methods, and systems for creating 3DCGAs (3 Dimensional Computer Graphic Animations) which automatically utilize a prototype-free production preparation methodology. Characteristics of this study include that it proposes the methodology for creating assembly operation 3DCGAs automatically, for all the possible assembly operations corresponding each of the possible assembly sequences first. Using the created 3DCGAs, the study next considers assembly methods by evaluating how easy or 'operator friendly' they are in implementing, and devises tools or jigs to be used, and plans efficient assembly line organization. The concept of the methodology was formed by focusing on the value-adding assembly steps at which parts turn into products directly. The study also validates the effectiveness of the presented methodology by employing the methods used in actual production preparation process in businesses, and proves that an efficient assembly line can be organized in a shorter period of time utilizing the developed system and by preparing easy-to-operate and efficient plans in 3DCGAs at the design stage.