• Journal of the Korean Society of Combustion
• /
• v.22 no.3
• /
• pp.47-52
• /
• 2017

The propellant tile and crack which account for the greatest proportion of solid rockets are profoundly affected by viscosity and mechanical properties of solid propellant. In this paper HTPB/AP/Al system propellant has been researched for the viscosity, mechanical properties and burning properties with type and contents of bonding agents. The viscosity of propellant was changed significantly depending on the type and contents of bonding agents, and mechanical properties of HTPB/AP/Al system propellant were also varied. Considering both lower viscosity and stable mechanical properties, the optimum type and contents of bonding agents can be identified as the main factors to the HTPB/AP/Al system propellant.

• Journal of Korean Society for Quality Management
• /
• v.23 no.1
• /
• pp.74-94
• /
• 1995

Through the application of Quality Assurance(QA) techniques in R&D activities, we can approach for cost reduction and productivity improvement with high reliability. Application of QA systems in R&D in developed countries were studied, a enquete survey was performed to investigate researcher's understanding of QA in R&D. As a result of this study, it is considered desirable that QA system be applied partially to the feasible work areas at first, and the scope of application be enlarged to extended areas, later. For these aims, various and feasible QA system should be developed and established. As the need for quality assurance in R&D is expected to be increased continuously in the future, it is imperative for us to be prepared for the application of QA system in R&D activities.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.39-45
• /
• 2018

The purpose of this study is to evaluate the usefulness of a software-based quality assurance system based on Volumetric Modulated Arc Therapy treatment plan. Evaluate treatment plan through the D VH analysis, PTV mean dose ($D_{mean}$) and PTV 95% dose($D_{95}$) compare the MFX based on original treatment plan, Average error rate was $0.9{\pm}0.6%$, $1.0{\pm}0.8%$, respectively. Measuring point dose using phantom and ion chamber, the average error rate between the ionization chamber and MFX was $0.9{\pm}0.7%$, $1.1{\pm}0.7%$ (high dose region), $1.1{\pm}0.9%$, $1.2{\pm}0.7%$ (low dose region). The average gamma though of MFX and $Delta^{4PT}$ is $98.7{\pm}1.2%$, $98.4{\pm}.3%$, respectively. Through this study, A software based QA system that simplifies hardware based QA procedures that involve a lot of time and effort. It can be used as a simple and useful tool in clinical practice.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.327-340
• /
• 2015

Purpose : Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat uniforms' defects and 40mm ammunition explosion accident. To address these problems, Defense Agency for Technology and Quality(DTaQ) introduced new systems such as Manufacturing Readiness Assessment(MRA), Test Report Information System(TRIS) and so on. However, these activities require the human and time resources which cannot be increased in short period. In this paper, we suggest more practical and efficient product examination method. Methods : The most popular and widely used government's quality assurance technique is a sampling method to examine the product. In this research, we first reviewed the DTaQ's quality assurance regulation, then identified several possible problems and finally suggested more efficient and effective sampling plans. Results : We have suggested new sampling framework and evaluated its performance on two military supplies by comparing with other sampling method, and observed that the number of tested samples can be substantially reduced. Therefore, required quality assurance time can be saved. Conclusion : In this paper, we first reviewed the product examination frameworks of DTaQ, PPQMS and DCMA. Then we identified several possible problems which can cause the loss of objectivity and time. To handle these problems, we suggested the new product examination framework and tested the framework to verify the performance.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.315-322
• /
• 2013

The aim of this work is to verify the self-quality assurances in medical institutions in Korea through the external audits by the group of experts and have a mutual discussion of the systematic problems. In order to validate the external audits 30 of 80 medical institutions across the nation were picked out considering the regional distribution and the final 25 institutions applied voluntarily to take part in this work. The basic rules were setup that any information of the participants be kept secrete and the measurements be performed with the dosimetry system already verified through intercomparision. The outputs for 2 or more photon beams, the accuracy of gantry rotation and collimator rotation and the poistional accuracy of MLC movement were measured. The findings for the output measurement showed the differences of -0.8%~4.5%, -0.79%~3.01%, and -0.7%~0.07% with respect to that of the verified dosimetry system for the 6MV, 10MV, and 15MV, respectively. For the reference absorbed dose 8 (16%) of 50 photon beams in 25 medical institutions differed 2.0% or greater from the reference value. The coincidences of Field size with x-ray beam and radiation isocenters of Gantry roration and collimator rotation gave the results of within ${\pm}2$ mm for every institute except 2 institutions. The positional accuracy of MLC movement agreed to within ${\pm}1$ mm for every institute. For the beam qualities of 6 MV photon beams kQ values showed the distribution within 0.4% between maximum and minimum. For the protocols 21 institutions (84%) used absorbed dose to water based protocol while 4 insitutions (16%) used air kerma based one. 22 institutions employed the SSD technique while 3 institutions did the SAD one. External audit plays an important role in discovering the systematic problems of self-performing Quality Assurances and having in depth discussion for mutual complementation. Training experts of international level as well as national support system are required so that both the group of experts of medical physicists and government laboratory could perform together periodical and constant external audits.

• Journal of Korean Society for Quality Management
• /
• v.25 no.1
• /
• pp.142-155
• /
• 1997

To successfully carry out large scale research projects while su, pp.rting quality assurance of research output, effective and systematic management through utilization of resources such as manpower, time and cost as well as engineering techniques such as component technology and design methodology is required. It is necessary to establish development methodology to su, pp.rt quality assurance. The development methodology covers the contents and procedures of the project, such as division of the project into independently executable units, allocation of resources including researchers, component technology, related know-how and equipment, deployment of research units and integration of the project at the end. In this paper we present systematic development methodology for quality assurance in large scale software development projects by analyzing the contents of the methodology a, pp.ied to the Gigabit Information-processing And Networking Technology development project(GIALT).

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1669-1679
• /
• 2010

Related to the on-going "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train", activities by each phase shall be conducted to achieve SIL4 level and obtain safety certification from the Independent Safety Assessment(ISA), based on the IEC standards((IEC 62278/62279 and IEC 62425) for the first time in Korea. This thesis describes the introduction of IEC standards, system assurance activities (such as plan, analysis, test, verification and validation) in compliance with requirements management and project life-cycle and relations with the safety assessment activities; and certification activities (such as document reviews and audits) through system RAMS activities, software quality assurance activities and safety assessment, for the purpose of achieving a successful safety certification at the time of completing the project as system assurance activities including software and safety certification activities in order to acquire the safety certification for train control system which does not exist at all in domestic cases. It is believed that overall system safety assurance activities in this project will contribute to develop more upgraded products of the domestic train control system on the quality and safety point of view, find overseas markets and establish a bridgehead in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.648-654
• /
• 2018

Currently, the Defense Agency for Technology and Quality (DTaQ), which is responsible for the quality assurance of military supplies, divides munitions into four categories, in order to conduct its governmental quality assurance activities, including product examination, process review and system audit. However, these 4 categories may differ depending on the related organizations' (e.g. Defense Acquisition Program Administration, munitions manufacturing) military requirements. Therefore, in this study, appropriate classification criteria for munitions are suggested for the sake of the efficient procurement, production and quality assurance of military supplies. We investigated the item classification system of the Public Procurement Service, which is a similar organization to the DTaQ. We also compared the appropriate classification criteria with those of related organizations and identified the current status of munitions classification data according to the current standard. In addition, application samples are presented using the proposed quality assurance classification criteria. Finally, the classification criteria of military supplies proposed in this paper will contribute to improving the efficiency of government quality assurance activities.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.596-601
• /
• 2013

In the current pavement construction practice, the state agencies traditionally determine the quality of the as-constructed pavement mix based on individual mixture material parameters (e.g., air voids, cement or asphalt content, aggregate gradation, etc.) and consider these parameters as key variables to influence payment schedule to the contractors and the present and future quality of the as-constructed mixture. A set of empirically pre-determined pay adjustment schedule for each parameter that was differently developed and being used by the individual agencies is then applied to a given project, in order to judge whether each parameter conforms to the designated specifications and consequently the contractor may either be rewarded or penalized in accordance with the payment schedule. With an improved quality assurance system, the Performance Related Specification, the individual parameters are not utilized as a direct judgment factor; rather, they become independent variables within a performance prediction function which is directly used to predict the performance. The quantified performance based on the prediction model is then applied to evaluate the pavement quality. This paper presents the brief history of the quality assurance in asphalt pavement construction including the Performance Related Specifications, statistical performance models in terms of fatigue and rutting distresses, as an example of the performance prediction models, and envisions the possibilities as to how this Performance Related Specification could be utilized in other infrastructures construction quality assurance.

• International Journal of Computer Science & Network Security
• /
• v.23 no.11
• /
• pp.142-148
• /
• 2023

The National Agency for Quality Assurance in Higher Education plays a crucial role in education in Ukraine, as an independent entity creates and ensures quality standards of higher education, which allow to properly implement the educational policy of the state, develop the economy and society as a whole.The purpose of the article: to reveal the crucial role of the National Agency for Quality Assurance in Higher Education to create quality management of higher education institutions, to show its mechanism as an independent entity that creates and ensures quality standards of higher education. and society as a whole. The mission of the National Agency for Quality Assurance in Higher Education is to become a catalyst for positive changes in higher education and the formation of a culture of its quality. The strategic goals of the National Agency are implemented in three main areas: the quality of educational services, recognition of the quality of scientific results, ensuring the systemic impact of the National Agency. The National Agency for Quality Assurance in Higher Education exercises various powers, which can be divided into: regulatory, analytical, accreditation, control, communication.The effectiveness of the work of the National Agency for Quality Assurance in Higher Education for 2020 has been proved. The results of a survey conducted by 183 higher education institutions of Ukraine conducted by the National Agency for Quality Assurance in Higher Education are shown. Emphasis was placed on the development of "Recommendations of the National Agency for Quality Assurance in Higher Education regarding the introduction of an internal quality assurance system." The international activity and international recognition of the National Agency for Quality Assurance in Higher Education are shown.