• Journal of Applied Reliability
• /
• v.16 no.3
• /
• pp.208-215
• /
• 2016

Purpose: ASRP for the domestic development guided missiles requires not only for the reliability evaluation of the products in storage but also for the life cycle management of the products including development prototypes and initial production items. Methods: For this purpose, it should be performed to build a performance database before and after the accelerated aging test with shelf life items including development prototypes and initial production items, based on which the lifetime prediction should also be carried out. In addition, HILS must be applied for the acceptance test with the initial and follow-up production items, and also for ASRP for the long-term storage products in order to secure systematic quality assurance. Results: The results for the life cycle reliability Improving of domestic development of guided missiles are DB building of prescription Item performance, active application of HILS, Management associated with guided missiles life cycle and to Secure technology data about the introduction of foreign guided missiles. Conclusion: Furthermore, it is demanded that DTaQ, the managing agency of ASRP, actively take part in the process to maintain reliability engagement consistency over the life cycle of guided missiles.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup2
• /
• pp.1-5
• /
• 2016

To reduce tobacco use and related harm in Korea, telephone based cessation services (Quitlines) began full operation to provide regular behavioral counseling for smoking cessation in 2006. After registration in the cessation program, at least 21 calls per year are given to each client to help quit and encourage maintenance. Tailored programs for males, females, and adolescent smokers have been offered taking into account smokers' characteristics and smoking behavior. Mailing self-help quit packs and e-mail and SMS services are allowable as additional services.A total of 23,201 smokers were registered on the Quitline program from 2006 to 2014. In 2014, an average of 13,343 calls per month have been received by 28 coaches, the 1 year abstinence rate of clients is 26%, and clients' satisfaction rate is 81.6%. After introduction of the call system in 2007, client convenience and effective operations have been achieved with high technology support of a computer-based telephone system. Systematic education and evaluation programs for quit coaches have contributed to quality assurance of the services. Currently, research into development of new programs and evaluation of Quitline performance is being undertaken. A Comprehensive Multi-channel Cessation Center (CMCC) has been suggested and is now planned as a next step in the national program for smoking cessation.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.153-158
• /
• 2017

Procurement system of public construction projects in Japan is changing with diversity in rapid pace. The quality assurance and risk management of construction projects should be more certain as the projects are turning into larger scale and more complexed. The clients in the public sector will want to make the relation of responsibility among the client, the designer (architects and engineers), and contractor clearer in terms of role and risk. Public-Private Partnership (PPP) is one of the methods for collaboration of the public sector and the private sector in public construction projects where the public utilizes the ability and suggestion of the private. Private Finance Initiative (PFI), Design-Build-Operate (DBO), market testing, designated manager system, outsourcing of tasks in local governments are well-known as examples of PPP in Japan. Indeed, there is an obvious trend that Design-Build (DB) is adopted in public construction projects in many countries including Japan. In this paper, the public construction projects in various procurement systems are surveyed and analyzed. They are not limited within the traditional procurement, Design-bid-Build, a separate order system of design and construction. Design-Build or PFI are adopted. In particular, contract by wide range including maintenance of equipment can be found. On the other hand, modification from originally typical PFI is taking place, such as concept design and project finance are removed from the roles and the tasks of the special purpose company (SPC) in PFI. Standard roles and tasks in a construction project are modeled in this paper.

• Journal of Radiation Protection and Research
• /
• v.49 no.1
• /
• pp.40-49
• /
• 2024

Background: This study aimed to prioritize policy measures to improve radiation safety management in medical institutions using the analytic hierarchy process. Materials and Methods: It adopted three policy options-engineering, education, and enforcement-to categorize safety management measures, the so-called Harvey's 3Es. Then, the radiation safety management measures obtained from the current system and other studies were organized into action plan categories. Using the derived model, this study surveyed 33 stakeholders of radiation safety management in medical institutions and analyzed the importance of each measure. Results and Discussion: As a result, these stakeholders generally identified enforcement as the most important factor for improving the safety management system. The study also found that radiation safety officers and medical physicists perceived different measures as important, indicating clear differences in opinions among stakeholders, especially in improving quality assurance in radiation therapy. Hence, the process of coordination and consensus is likely to be critical in improving the radiation safety management system. Conclusion: Stakeholders in the medical field consider enforcement as the most critical factor in improving their safety management systems. Specifically, the most crucial among the six specific action plans was the "reinforcement of the organization and workforce for safety management," with a relative importance of 25.7%.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.57-67
• /
• 2013

Purpose: Replacing the film which used to be used for checking the set-up of the patient and dosimetry during radiation therapy, more and more EPID equipped devices are in use at present. Accordingly, this article tried to evaluated the accuracy of the position check-up and the usefulness of dosimetry during the use of an electronic portal imaging device. Materials and Methods: On 50 materials acquired with the search of Korea Society Radiotherapeutic Technology, The Korean Society for Radiation Oncology, and Pubmed using "EPID", "Portal dosimetry", "Portal image", "Dose verification", "Quality control", "Cine mode", "Quality - assurance", and "In vivo dosimetry" as indexes, the usefulness of EPID was analyzed by classifying them as history of EPID and dosimetry, set-up verification and characteristics of EPID. Results: EPID is developed from the first generation of Liquid-filled ionization chamber, through the second generation of Camera-based fluoroscopy, and to the third generation of Amorphous-silicon EPID imaging modes can be divided into EPID mode, Cine mode and Integrated mode. When evaluating absolute dose accuracy of films and EPID, it was found that EPID showed within 1% and EDR2 film showed within 3% errors. It was confirmed that EPID is better in error measurement accuracy than film. When gamma analyzing the dose distribution of the base exposure plane which was calculated from therapy planning system, and planes calculated by EDR2 film and EPID, both film and EPID showed less than 2% of pixels which exceeded 1 at gamma values (r%>1) with in the thresholds such as 3%/3 mm and 2%/2 mm respectively. For the time needed for full course QA in IMRT to compare loads, EDR2 film recorded approximately 110 minutes, and EPID recorded approximately 55 minutes. Conclusion: EPID could easily replace conventional complicated and troublesome film and ionization chamber which used to be used for dosimetry and set-up verification, and it was proved to be very efficient and accurate dosimetry device in quality assurance of IMRT (intensity modulated radiation therapy). As cine mode imaging using EPID allows locating tumors in real-time without additional dose in lung and liver which are mobile according to movements of diaphragm and in rectal cancer patients who have unstable position, it may help to implement the most optimal radiotherapy for patients.

• Quality Improvement in Health Care
• /
• v.2 no.2
• /
• pp.112-129
• /
• 1996

Background : A small number of high cost patients usually spend a larger proportion of scarce health resources. Aged, long-term care and readmitted patients usually belong to these high cost patient group. Among others, long length of stay and readmission can be reduced by checking its cause, and these are the areas needed most of quality improvement activity. Characteristics of high cost medical users between health insurance program and medical assistance program were reviewed. Methods : The inpatient claims of health insurance and medical assistance program were analyzed. Patients were divided by 6 groups; long-term, mid-term, short-term, readmitted, cancer and aged. We defined high cost patients as those who had spent one and half million won and over per 6 months. Characteristics of high cost patients for each group were reviewed. Results : medical assistance patients used much more resources than the insured members in the average hospital cost per case but less in daily hospital cost. The former had a longer length of stay and had much heavier diseases. Major diseases of both group were cancer, diseases of circulatory system and chronic degenerative diseases. Gallstone and schizophrenia were more in the insured program. However, pulmonary tuberculosis, asthma were more common among the medical assistance patients. Early readmission before 2 weeks were 28-30% of the total readmission. Readmission rate in the malignat neoplasm and renal failure were 80% and more. Q.A program should be installed to prevent unnecessary readmissions. Conclusion : Almost 30% of early readmissions and admissions due to complications and long length of stay should be reviewed carefully to keep cost down and to enhance the quality of hospital care.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.1-9
• /
• 2015

PURPOSES : The objective of this study is to propose a quality control and quality assurance method for use during asphalt pavement construction using non-destructive methods, such as ground penetrating radar (GPR) and an infrared (IR) camera. METHODS : A 1.0 GHz air-coupled GPR system was used to measure the thickness and in situ density of asphalt concrete overlay during the placement and compaction of the asphalt layer in two test construction sections. The in situ density of the asphalt layer was estimated based on the dielectric constant of the asphalt concrete, which was measured as the ratio of the amplitude of the surface reflection of the asphalt mat to that of a metal plate. In addition, an IR camera was used to monitor the surface temperature of the asphalt mat to ensure its uniformity, for both conventional asphalt concrete and fiber-reinforced asphalt (FRA) concrete. RESULTS : From the GPR test, the measured in situ air void of the asphalt concrete overlay gradually decreased from 12.6% at placement to 8.1% after five roller passes for conventional asphalt concrete, and from 10.7% to 5.9% for the FRA concrete. The thickness of the asphalt concrete overlay was reduced from 7.0 cm to 6.0 cm for the conventional material, and from 9.2 cm to 6.4 cm for the FRA concrete. From the IR camera measurements, the temperature differences in the asphalt mat ranged from $10^{\circ}C$ to $30^{\circ}C$ in the two test sections. CONCLUSIONS : During asphalt concrete construction, GPR and IR tests can be applicable for monitoring the changes in in situ density, thickness, and temperature differences of the overlay, which are the most important factors for quality control. For easier and more reliable quality control of asphalt overlay construction, it is better to use the thickness measurement from the GPR.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.490-497
• /
• 2017

The Main Landing Gear(MLG) of Rotary Wing Aircraft is an essential equipment in Landing System for pilot to perform a flight mission. It supports the fuselage at ground and absorbs the impact from the ground when landing, thereby, these functions sustain operational capability for pilot and crew. However, the A aircraft caused asymmetry and leakage hydraulic when it was stationed on the ground. Therefore, this paper summarizes pilot comments in operation which are classified by cause of occurrence and the troubleshooting process about each comment. It also describes design improvements which was derived from troubleshooting and suggests verification results of flight test.

• Journal of the Korean Dietetic Association
• /
• v.22 no.4
• /
• pp.251-260
• /
• 2016

This study was conducted to determine recognition of Chikhanwoo, promote its market competitiveness, and vitalize its uses in Korea. This research was carried out on 465 people, including 264 of the general public and 191 livestock farmers. For awareness of Chikhanwoo, 53.6% of the general public and 86.9% of livestock farmers recognized Chikhanwoo (P<0.001) through TV, Internet, news, magazines, and others. For consumption behaviors of Chikhanwoo meat, 4.3% of the general public and 1.9% of livestock farmers have purchased Chikhanwoo meat in the past. Most of them hinted at their intention to repurchase and highly intimated their wish to purchase on whether Chikhanwoo tastes better, is more nutritious and is safer than Hanwoo. In addition, they thought country of origin and price were the most important factors for purchasing (P<0.001). For recognition of the Hanwoo grading system, they preferred $1^{{+}{+}}$ and $1^+$, significantly (P<0.001). For need for quality certification, most respondents thought that the government should introduce a quality certification system for Chikhanwoo. For importance factor of prevalence of Chikhanwoo meat, marketability value had the highest degree of importance, followed by taste, quality, tradition and cooking methods (P<0.001). Results of this study show that domestic consumption of Chikhanwoo can be boosted by supplying Chikhanwoo meat with a differentiated taste and a safety assurance to the general public. There is also need to enhance genetic resources and improve brand value of Chikhanwoo. Continuous research and efforts should be made for the development of the livestock market.

• Journal of KIISE
• /
• v.42 no.7
• /
• pp.860-867
• /
• 2015

In the defense field, weapon systems are increasing in importance, as well as the weight of the weapon system embedded software development as an advanced technology. As the development of a network-centric warfare has become important to secure the reliability and quality of embedded software in modern weapons systems in battlefield situations. Also, embedded software problems are transferred to the production stage in the development phase and the problem gives rise to an enormous loss at the national level. Furthermore, development companies have not systematically constructed a software reliability test. This study suggests that approaches about a qualityverification- system establishment of embedded software, based on a variety of source code reliability test verification case analysis.