• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.387-393
• /
• 2021

This study aimed to improve the software quality in weapon systems by applying ISO/IEC 25023 to the software engineering process. The software engineering process in weapon systems manages the Software Quality Requirement but has restrictively improved the software quality. Software quality items are already defined and used for software engineering processes in weapon systems, but they are defined inconsistently according to individual software development cases. Thus, the methods of quantifying software quality are different, even though the same software quality is defined. In addition, the software quality has been managed differently. The major problems of software engineering processes in weapon systems are the unclear definition of the software quality requirements and the absence of quantifying software quality standards. ISO/IEC 25023 is composed of eight quality characteristics and thirty-one sub-characteristics. ISO/IEC 25023 provides measurement functions that can quantify the software product quality based on its characteristics. To improve the software quality further, the measurement functions in ISO/IEC 25023 are suggested to quantify and manage software quality for software engineering processes in weapon systems. The expected effects of this study were analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.440-452
• /
• 2010

For an evaluation of the software product, the national/international organizations and labs have been studying various methodologies for the quality on the basis of ISO/IEC Quality Assurance System, but they still have many issues in evaluation of the anti-virus software that has special characteristics of complexity. In this paper, to establish a methodology of the quality evaluation for the anti-virus software, fulfilling the requirements more than reasonable level, a process to draw the evaluation items and quantification was established. And the information of weight was objectified by analyzing the relative magnitude between each factors. Based on the defined information (evaluation item, weight), conducting the quality evaluations for 70 kinds of open anti-virus software collected from the portal sites in the real test environment, and as a result of the positive analysis with user's long-term experience, this paper justifies the evaluation item and the weight.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.133-141
• /
• 2017

Traffic volume increases according to highway expansion and industrial development which causes repetitive defect and durability degradation on pavement. The research of quality assurance system used abroad has introduced Korea. Korea Expressway Corporation (KEC) has developed a Quality Performance Index (QPI) that quantitatively assesses the level of quality of the final product, and practical applications. Assessment factor on concrete pavement consisted of pavement thickness, compressive strength, IRI and spacing factor. Assessment factor on concrete pavement is determined by empirical evaluation factor from abroad. In this study, analysis of evaluation factors of concrete pavement by using pavement life prediction simulation and measured data were evaluated with consideration of feasibility of the assessment factor. Pavement life, performance and durability are affected by pavement thickness, compressive strength, IRI and spacing factor in assessment factor on concrete pavement, QPI.

• Progress in Medical Physics
• /
• v.26 no.3
• /
• pp.168-177
• /
• 2015

For evaluating the treatment planning accurately, the quality assurance for treatment planning is recommended when patients were treated with IMRT which is complex and delicate. To realize this purpose, treatment plan quality assurance software can be used to verify the delivered dose accurately before and after of treatment. The purpose of this study is to evaluate the accuracy of treatment plan quality assurance software for each IMRT plan according to MLC DLG (dosimetric leaf gap). Novalis Tx with a built-in HD120 MLC was used in this study to acquire the MLC dynalog file be imported in MobiusFx. To establish IMRT plan, Eclipse RTP system was used and target and organ structures (multi-target, mock prostate, mock head/neck, C-shape case) were contoured in I'mRT phantom. To verify the difference of dose distribution according to DLG, MLC dynalog files were imported to MobiusFx software and changed the DLG (0.5, 0.7, 1.0, 1.3, 1.6 mm) values in MobiusFx. For evaluation dose, dose distribution was evaluated by using 3D gamma index for the gamma criteria 3% and distance to agreement 3 mm, and the point dose was acquired by using the CC13 ionization chamber in isocenter of I'mRT phantom. In the result for point dose, the mock head/neck and multi-target had difference about 4% and 3% in DLG 0.5 and 0.7 mm respectively, and the other DLGs had difference less than 3%. The gamma index passing-rate of mock head/neck were below 81% for PTV and cord, and multi-target were below 30% for center and superior target in DLGs 0.5, 0.7 mm, however, inferior target of multi-target case and parotid of mock head/neck case had 100.0% passing rate in all DLGs. The point dose of mock prostate showed difference below 3.0% in all DLGs, however, the passing rate of PTV were below 95% in 0.5, 0.7 mm DLGs, and the other DLGs were above 98%. The rectum and bladder had 100.0% passing rate in all DLGs. As the difference of point dose in C-shape were 3~9% except for 1.3 mm DLG, the passing rate of PTV in 1.0 1.3 mm were 96.7, 93.0% respectively. However, passing rate of the other DLGs were below 86% and core was 100.0% passing rate in all DLGs. In this study, we verified that the accuracy of treatment planning QA system can be affected by DLG values. For precise quality assurance for treatment technique using the MLC motion like IMRT and VMAT, we should use appropriate DLG value in linear accelerator and RTP system.

• Journal of Korean Society for Quality Management
• /
• v.10 no.2
• /
• pp.2-9
• /
• 1982

In principle the methods of increasing the reliability of complex system can be classified into the following four basic methods: (1) using the stand-by redundancy; (2) decreasing the failure rate of the system; (3) decreasing the time of continuous operation; (4) decreasing the mean repair time. Among the above four methods, it is generally known that the method of stand-by redundancy is the most effective general, to increase the reliability of systems. Therefor this paper aims to compare the gain in reliability which is achieved by applying stand-by redundancy with other methods, and to show the characteristics of each method From the comparison of the methods of increasing reliability, the following important facts are found: When the method of stand-by redundancy is used to increase the reliability of complex systems intended for long-term operation, a hight multiplicity of stand-by redundancy is required. Thus an increase of the reliability of complex system by applying stand-by redandancy is realized at the expense of characteristics such as weight, size, cost, increased complexity of operation conditions. And this property restricts its use in systems which are critical with respect to weight, size, cost or operation conditions. The method of stand-by redundancy is the most effective when this method is used to increase the reliability of complex systems intended for short-term operation, and the method of decreasing failure rate is the most effective when it is used to increase the reliability of systems intended for long-term use. The methods of increasing reliability discussed in this paper make it possible to make highly reliable systems. But it is not possible to make a highly reliable system using a single method of increasing reliability, even if it is the most effective one. Therefore it is recommended to use all or a majority of the above four methods by choosing it in accordance with the properties of the system under construction.

• Journal of Information Technology Applications and Management
• /
• v.11 no.4
• /
• pp.35-47
• /
• 2004

The nuclear design analysis requires time-consuming and erroneous model-input preparation. code run. output analysis and quality assurance process. To reduce human effort and improve design quality and productivity. Innovative Design Processor (IDP) is being developed. Two basic principles of IDP are the document-oriented desigll and the web-based design. The document-oriented design is that. if the designer writes a design document called active document and feeds it to a special program. the final document with complete analysis. table and plots is made automatically. The active documents can be written with Microsoft Word or created automatically on the web. which is another framework of IDP. Using the proper mix-up of server side and client side programming under the LAMP (Linux/Apache/MySQL/PHP) environment. it e design process on the web is modeled as a design wizard style so that even a novice designer makes the design document easily. This automation using the IDP is now being implemented for all the reload design of Korea Standard Nuclear Power Plant (KSNP) type PWRs. The introduction of this process will allow large reduction in all reload design efforts of KSNP and provide a platform for design and R&D tasks of KNFC.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.3
• /
• pp.316-324
• /
• 2012

This research shows the improved methodology which can be applied for universities which want to set up their GHG inventories. In other words, we tried to make guideline in problems due to the unique characteristics of universities. This guideline will help university to deal with the problems they are facing: For example university has less enforcement in operational control compared to the business sector. And it also has various usage of facilities, although these facilities are not maintained by same principal agent. The difference between owner and manager is an another reason for difficulty in setting group organization. The improved and adaptable methods responding to these problems were suggested from this research. The results of this research says the new definition of function for various actors in university for quality control and quality assurance. Because the suggestions made in this research which concerns with criteria for building of universities' GHG inventories were all read by current legislation, there is an anticipation that this can be an official guideline that can be applied to the universities right away.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.17-21
• /
• 2006

The systematic validation of the ITS devices' performance reliability is very important because it helps their performance reliability to be maintained in a certain level, enabling to assure the reliability of the collected data, processed data and provided information. Although the government's regulation, "Transportation Efficiency Act", which requires ITS devices to be validated, was passed in 2001, no systematic inspection and calibration procedures have been developed so far. Therefore, in this study the systematic and efficient inspection and calibration method or procedure is investigated by reviewing the similar cases and best practices in Korea and overseas and some recommendations are made.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.168.2-168.2
• /
• 2010

The growing market for geothermal heat pump system requires great consideration of quality control and assurance in design and construction. The borehole heat exchanger of GHP system should be sustainable, economical and ecological. Thermal Response Test (TRT) is a useful method for site investigation to obtain reliable data for a optimal system design from the technical and economical aspect. Intensive researches combined with exchange of experiences on an international level within the IEA ECES Annex 21 improved the technology. Major subjects on the interpretation of TRT are development of improved evaluation models, evaluation of the TRT with respect to geological layers and investigation of the influence of ground water. Current status of TRT in South Korea, as well as a new version of the Korean TRT standard test procedure was presented. TRT is mostly used for governmental supported projects with corresponds to more than 100 GCHP systems per year. More than 200 tests are applied, mostly on single U-tube heat exchangers (about 95%). Bentonite is the most common grouting to be used. KIGAM (Korea Institute of Geoscience & Mineral Resources) is also keeping a GIS geological and geothermal database. In the institute also laboratory measurements of rock properties are carried out. About 90% of the laboratory measurements of the rock heat conductivity shows higher values than the in-situ TRT.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.4
• /
• pp.153-159
• /
• 2007

Recently, as a result of the economic growth, the concentration of population towards the cities and the rise in land prices, the demand for high rise buildings has increased significantly, the trend to build high rise buildings such as the mixed-use development buildings by the domestic construction companies continues. It's very important what kind of form work system is applied on the Core Wall of the high rise buildings to determine the economic efficiency for the whole project. That's because the appropriate selection of the Formwork system enables the construction cost lower, makes the good quality of the finished concrete, reduces the construction period, assurance of safety, and further more, it enables to achieve the successful performance of the projects. Therefore, this research, after comparing the strength and the weakness between the construction methods, focus the point to provide a builder the basic data to choose the right Formwork method.