• Korean Journal of Plant Resources
• /
• 제33권5호
• /
• pp.436-445
• /
• 2020

Goji berry (Lycium chinense Mill.) is one of medicinal plants. Its leaves has been used to manufacture the functional foods by replacing the dried-fruit because of low production costs. In order to produce the leaves of uniform quality, continuous selection and the establishment of cultivation techniques were required. Among the eleven recommended cultivars, 'Myeongan' showed high yielding and rapid regeneration after cutting. The dried-leaf yield was linearly increased from 106 kg/10a on May 16 to 287 kg/10a on June 20. An appropriate cutting date and cutting length (about 60-70 cm) was important factors for its efficient regeneration. The late cutting times were not suitable due to difficulties during plant harvesting because of stem rigidity and thorn generation. The betaine content of leaves ranged from 1.43 ~ 2.63% and significantly affected by the varieties and the cutting dates. The main physiological functionality of leaf was Angiotesin-1-converting enzyme (ACE) inhibitory activity, representing the anti-hypertensive. The other physiological functionalities, XOD inhibitory activity, antioxidant activity, tyrosinase inhibitory activity, SOD-like activity, α-glucosidase inhibitory activity and fibrinolytic activity, were not detected or less than 20%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제29권6C호
• /
• pp.801-814
• /
• 2004

In this paper, we propose a block adaptive binarization (BAB) using a modified quadratic filter (MQF) to binarize business card images acquired by personal digital assistant (PDA) cameras effectively. In the proposed method, a business card image is first partitioned into blocks of 8${\times}$8 and the blocks are then classified into character Hocks (CBs) and background blocks (BBs). Each classified CB is windowed with a 24${\times}$24 rectangular window centering around the CB and the windowed blocks are improved by the pre-processing filter MQF, in which the scheme of threshold selection in QF is modified. The 8${\times}$8 center block of the improved block is barbarized with the threshold selected in the MQF. A binary image is obtained tiling each binarized block in its original position. Experimental results show that the MQF and the BAB have much better effects on the performance of binarization compared to the QF and the global binarization (GB), respectively, for the test business card images acquired in a PDA. Also the proposed BAB using MQF gives binary images of much better quality, in which the characters appear much better clearly, over the conventional GB using QF. In addition, the binary images by the proposed BAB using MQF yields about 87.7% of character recognition rate so that about 32.0% performance improvement over those by the GB using QF yielding about 55.7% of character recognition rate using a commercial character recognition software.

• Korean Journal of Optics and Photonics
• /
• 제31권3호
• /
• pp.142-147
• /
• 2020

In this paper, we report highly efficient second harmonic generation of continuous-wave Yb fiber lasers incorporating a periodically poled LiTaO₃ device (MgO:PPSLT) as a frequency converter. The seed laser output from a Yb fiber master oscillator using a Fabry-Perot feedback cavity was amplified in a Yb fiber amplifier stage, yielding 28.5 W of linearly polarized output at 1064 nm in a beam with beam quality, M², of ~1.07. Second harmonic generation was achieved by passing the laser beam through MgO:PPSLT. Under optimized conditions, we obtained 11.1 W of green laser output at 532 nm for an incident signal power of 25.0 W at 1064 nm, corresponding to a conversion efficiency of 44.4%. The detailed investigation to find the optimized operating conditions and prospects for further improvement are discussed.

• Journal of the Korea Concrete Institute
• /
• 제29권1호
• /
• pp.43-51
• /
• 2017

As per current seismic design codes, diagonally reinforced coupling beams are restricted to coupling beams having aspect ratio below 4. However, a grouped diagonally reinforcement detail makes distribution of steel bars in the beam much harder, furthermore it may result in poor construction quality. This paper describes the experimental results of concrete coupling beam reinforced with high-strength steel bars (SD500 & SD600 grades). In order to improve workability for fabricating coupling beams, a headed large diameter steel bar was used in this study. Two full-scale coupling beams were fabricated and tested with variables of reinforcement details and aspect ratio. To reflect real behavior characteristic of the beam coupling shear walls, a rigid steel frame system with linked joints was set on the reaction floor. As a test result, it was noted that cracking and yielding of reinforcement were initially progressed at the coupling beam-to-shear wall joint, and were progressed to the mid-span of the coupling beam, based on the steel strain and failure modes. It was found that the coupling beams have sufficient deformation capacity for drift ratio of shear wall corresponding to the design displacement in FEMA 450-1. In this study, the headed horizontal steel bar was also efficient for coupling beams to exhibit shear performance required by seismic design codes. For detailed design for coupling beam reinforced with high-strength steel, however, research about the effect of variable aspect ratios on the structural behavior of coupling beam is suggested.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제38권4호
• /
• pp.253-259
• /
• 2018

A new barley (Hordeum vulgare L.) cultivar 'Mihan' having ruminant-palatable semi-smooth awn and good silage quality was developed at National Institute of Crop Science(NICS), RDA in 2016. This cultivar was derived from a cross of the 'SB00T2064' and 'Suwon385' in 2001. And its promising line showed high yielding through the preliminary yield trials(PYT) and advanced yield trials (AYT) in Iksan from 2012 to 2013. It was designated as the 'Iksan487'. 'Iksan487' was conducted to regional yield trials (RYT) in one upland field and five paddy fields around Korea for three years from 2014 to 2016. And it was released as the name of 'Mihan'. It has growth habit of IV, erect plant type, green leaf and semi-smooth awn. Its heading date was April 23 in the paddy field and maturing date was May 24. Plant height of 'Mihan' was 96cm. Mihan's spikes per $m^2$ was 665. It has better winter hardiness and resistance to BaYMV (Barley Yellow Mosaic Virus) than that of barley cultivar 'Youngyang'. The average dry matter of 'Mihan' was about $10.9ton\;ha^{-1}$ in paddy field. And average feed quality of 'Mihan' was 10.3% of crude protein content, 26.1% of ADF (Acid Detergent Fiber), 46.9 % of NDF (Neutral Detergent Fiber) and 68.2% of TDN (Total Digestible Nutrients). 'Mihan' had grade I of silage quality. This cultivar would be suitable for the area above the daily minimum average temperature of $-8^{\circ}C$ in January in Korean peninsula.

• Korean Journal of Breeding Science
• /
• 제40권4호
• /
• pp.484-489
• /
• 2008

A new whole crop silage barley cultivar, "Youngyang", was developed from the cross between "Bunong and Milyang55 at the Yeongnam Agricultural Research Institute (YARI) in 2002. An elite line, YB3882-3B-17-1-3-1, was selected in 1999 and designated as "Milyang111". It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2000 to 2002 and was released by the name of "Youngyang" with higher yield and better animal feed quality than that of Olbori. The average heading and maturing dates of Youngyang were May 2 and June 6, which were late by 2 & 1 days than those of Olbori, respectively, in Suwon. Youngyang had longer culm length, 83cm but it had lesser spikes per $m^2$ 637 than that of Olbori, respectively, in RYT from 2000 to 2002. The rate of leaf sheath/whole length (culm+leaf) and the rate of the grains/whole crop weight was similar to Olbori. It showed resistance to BaYMV at the regions of Naju, Jinju, Milyang andt Iksan. however, the response of Youngyang to other environmental stresses (tolerance of cold and wet) was similar to Olbori. The dried whole crop yield potential of Youngyang in the RYT was about 11.67 MT/ha in paddy fields which was about 18% higher than that of Olbori. The grain yield potential was 6.32 MT/ha in paddy fields which was about 5% higher than that of Olbori. Youngyang had lower rate of shattering, higher content of protein and NDF, lower ADF and TDN, and better quality of silage than those of Olbori.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제39권4호
• /
• pp.243-249
• /
• 2019

A barley(Hordeum vulgare L.) cultivar 'Youjin' with hooded spike type having good silage quality was developed at National Institute of Crop Science, RDA in 2016. 'Youjin' showed both high yielding and cold resistance through the preliminary and advanced yield trials(PYT, AYT) from 2012 to 2013. We conducted regional yield trials(RYT) of 'Youjin' in six locations around Korea for three years from 2014 to 2016. It had erect plant type, growth habit of II, the green leaf and hooded awn type. In the paddy field its heading date was April 24 and the maturing date was May 25. Plant height was 99 cm and the number of spikes per ㎡ was 696. It has high rate of leaf blades, resistance to BaYMV(Barley Yellow Mosiac Virus) and good winter hardiness. The average dry matter of Youjin was about 17.2 MT ha^-1 in the field. And feed quality of 'Youjin' was 10.6% of crude protein content, 24.8% of ADF(Acid Detergent Fiber), 43.5 % of NDF(Neutral Detergent Fiber), 69.1% of TDN(Total Digestible Nutrients). And also 'Youjin' had grade I of silage quality.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제32권3호
• /
• pp.209-220
• /
• 2012

Most oats are used for livestock feed in the world. This experiment was conducted at Iksan city of Korea from 2007 to 2008. The objective of this study was to select eminent oat (Avena sativa L.) cultivars with high-yielding and a quality for forage adaptable in each planting seasons. Experimental design was split-plot design with three replications. A split plot design was used with seeding date on the main plots and other treatments fully randomized in sub-plots. A factorial arrangement of treatments included three different ecotypes cultivars, winter type (Sanmhan, Donghan and Chohan), summer type (High-speed, Darkhorse, and Swan), and naked oats near to spring type (Daeyang, Choyang, and Sunyang) and twelve seeding dates (twice a month from March to November). Plant height, dry matter yield, and percent TDN was significantly affected by seeding dates, cultivars, and the interaction of cultivars ${\times}$ seeding dates. There was a decrease in plant height, dry matter yield, and percent total digestible nutrients (TDN) as seeding was delayed from early March to late June and it also from early September to early November. The winter type oat cultivars such as Samhan, Donghan, and Chohan adapted to fall seeding and early summer harvest, while summer type cultivars such as High-speed, Darkhorse, and Swan showed high productivity either to summer seeding and mid-fall harvest or to spring seeding and early summer harvest. Naked type cultivars, Choyang and Daeyang, showed high forage yield by spring and summer seeding except for fall seeding because of cold damage. Summer type oat cultivars such as High-speed, Darkhorse, and Swan can supplement high forage production in spring. TDN yield showd the most at seeding in October 10 (780 kg $10a^{-1}$), followed at seeding in March 23 (627 kg $10a^{-1}$).

• Journal of Bio-Environment Control
• /
• 제33권3호
• /
• pp.148-155
• /
• 2024

This study aimed to assess the characteristics of fruit quality and seed formation resulting from pollination by four different pollen donors: 'SKK2', 'Deliwoong', 'Pohwa', and 'Chieftain'. The objective was to identify the most effective pollen donor for yielding commercially viable fruits in two cultivars of kiwifruit (Actinidia chinensis var. chinensis): 'Sunfl' and 'Garmhwang'. Over a two-year period, the fruit setting rate for 'Sunfl' and 'Garmhwang' kiwifruit, pollinated by the four donors, consistently exceeded 96%. For 'Sunfl', the heaviest fruit weight was observed when pollinated with 'Deliwoong' for both years, while the lightest fruit was associated with 'Pohwa' in 2021 and 'Chieftain' in 2022. For 'Garmhwang', there was a yearly variation with the heaviest fruit weight linked to 'Deliwoong' in 2021 and 'Chieftain' in 2022. When examining the fruit characteristics of 'Sunfl', the dry matter content was highest when pollinated by 'SKK2', and the soluble solids content peaked with 'Chieftain' in 2021, although no significant differences were observed in 2022. Total and immature seed numbers in 'Sunfl' were highest with hexaploid pollen donors, while the 1000-seed weight was highest with tetraploid pollen donors. For the fruit characteristics of 'Garmhwang', the dry matter content and titratable acidity were highest when pollinated by 'SKK2'. Soluble solids content showed annual variation. Mature and total seed number in 'Garmhwang' were highest with 'Deliwoong' and 'Chieftain', while the immature seed number was lowest with 'SKK2'.

• Korean Journal of Agricultural Science
• /
• 제41권4호
• /
• pp.327-334
• /
• 2014

Light intensity is one of the most important requirements for plant growth, affecting growth, development, survival, and crop productivity. Sunlight is the main energy source on Earth which is energy used by photosynthesis to convert light energy to chemical energy. In this study, the light use efficiency and photosynthetic characteristics of high-quality rice cultivars were evaluated after shading on ripening stage. For the study, we treated of three levels of shade (0, 50 and 70%) on rice at ripening stage and two levels of nitrogen (9 and 18 kg/10a) used three high yielding rice cultivars, such as Boramchan, Hopum, and Honong. The shade was given for the respective plots from heading up to harvesting. We were performed to determine growth survey, SPAD and chlorophyll fluorescence every 10 days interval after shading on ripening stage. At harvest stage, grain yield and yield components were determined. Results of analysis of the results representing the maximum photosynthetic efficiency of PSII, Fv/Fm, and SPAD were decreased by depending on the time at full sunlight. But shade treatments were not changed and a significant difference among cultivars did not appear. Compared with the full sunlight, shade treatments significantly delayed ripening rate and decreased rice quality of cultivated rice. Therefore, rice yield, can be reduced in proportion to the shading density is apparent, the rate of decrease was not observed difference between varieties, when protected from light 70%, and decreased to less than 50%. The adverse effects of low light intensity on the yield and yield components were not able to significantly minimize by the nitrogen level.