• Journal of ILASS-Korea
• /
• v.19 no.4
• /
• pp.204-210
• /
• 2014

Experimental study was conducted to investigate the effect of EGR(exhaust gas recirculation) on engine noise using single cylinder combustion ignition engine. Under constant engine rotary speed of 1200 RPM, 8 mg fuel quantity was injected with 15, 18 and 21% of oxygen ratio and 1400 bar of injection pressure. Using the in-cylinder pressure data acquired by a piezoelectric transducer, the engine performance parameters were calculated. Radiated engine noise measured for 10 seconds was analyzed using spectral characteristics and sound quality metrics such as loudness, sharpness, roughness. From the obtained engine performance parameters and sound quality metrics, effect of oxygen ratio of the premixed air, start of injection timing on frequency characteristic and sound quality metrics were analyzed. Correlation analysis was conducted between MPRR(maximum pressure rise rate), RI(ringing intensity) and sound quality metrics. RI was identified as the most important factor having influence on the sound quality metrics.

• The Research Journal of the Costume Culture
• /
• v.17 no.1
• /
• pp.177-188
• /
• 2009

SCM as the important marketing strategy enhance the firm's efficiency and compatibility in global market environment such as global outsourcing. Firms adopted SCM realized the need to evaluate precisely the performance of SCM. In spite of importance of SCM, there was not much intention and research to measure SCM performance in textile fashion industry. Therefore, the purpose of this case study was to measure performance of supply chain management in textile fashion business using BSC(Balanced Score Card) to measure not only financial perspective but also non-financial perspectives such as customer perspective, internal business perspectives, financial perspective, and innovation & learning perspective. The questionnaire developed by the reviews of the literature was adopted for this study. The results of this study showed that SCM performance was enhanced from the point of customer perspective(cost, quality, time, service), financial perspective(cash cycle time, inventory turn over, inventory obsolescence, return on asset, return on investment, capacity utilization), and innovation & learning perspective(cost for human resource management, service for human resources). But there was same performance level regarding internal business perspective(lead time, cost for manufacturing process, product quality control, productive flexibility for time, quantity, and variety). Therefore, we should keep close relationship and two way communication among supply chain members to promote better SCM performance.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.426-431
• /
• 2011

The quality of performance evaluation on engineering consultants that provide design-related technical services is difficult to be measured, and only a handful of papers discussed the quality during the design stage. Although design cost is relatively far less than construction cost for a project, the decisions made in the design phase have a significant impact on the final products of the project, especially for large public construction projects. Therefore, this research focuses on reviewing and then establishing a performance evaluation framework for the consulting firms that execute detailed design and provide technical services for the Taipei Rapid Transit Systems (TRTS). By interviewing experts, this study first established a set of indicators to evaluate these firms' performance. Then, those indicators were incorporated into the four aspects of balanced scorecard (BSC) to establish the architecture of the evaluation mechanism. The weight of each indicator was calculated by analytic hierarchy process (AHP) from a survey conducted among experts. The results showed that the top-three indicators were quantity take-off, functions conformity, and budgeting. The framework of performance evaluation established by this study can be applied to measure service performance during the design stage. It not only facilitates the monitoring of consulting firms, but also helps to reduce unnecessary change orders and disputes during the construction stage.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.371-381
• /
• 2017

The performance of the statistical context-sensitive spelling error correction depends on the quality and quantity of the data for statistical language model. In general, the size and quality of data in a statistical language model are proportional. However, as the amount of data increases, the processing speed becomes slower and storage space also takes up a lot. We suggest the improved statistical language model to solve this problem. And we propose an effective spelling error candidate generation method based on a new statistical language model. The proposed statistical model and the correction method based on it improve the performance of the spelling error correction and processing speed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.245-250
• /
• 2003

This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAIN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL (Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.45-52
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAlN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL(Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.

• Journal of Korean Society for Quality Management
• /
• v.22 no.1
• /
• pp.188-204
• /
• 1994

Most of computer-aided process planning(CAPP) systems have been developed to automate the process planning function. In this paper, we describe an analytical model for a CAPP system in order to improve the performance of production system in flexible manufacturing systems(FMSs) for computer intergrated manufacturing(CIM) architecture. This paper proposes an optimal process planning that minimizes the load time by minimizing the cycle time and the number of workstations using Kang and Hahm's heuristic approach so as to improve the performance of production system under the batch production of discrete products. We also perform simulation using SIMAN language to campare the line utilization of each for various product types. The proposed algorithm can be implemented in existing FMSs for on-line control of product quantity using programmable logic controllers(PLC) and communication devices.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.238-244
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end milts on the characteristics of high speed milling cutting process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAIN coated were utilized in the cutting tests. Dry cutting without coolant and semidry cutting using botanical oil coolant by the MQL(Minimum Quantity Lubricant) device were conducted. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that MQL spray cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than dry cutting did.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.2
• /
• pp.168-189
• /
• 2015

The job creation has been the most pressing issue after financial crisis in many countries around the world. Various policies for creating jobs have been implemented in order to revitalize regional economy in Korea. It has been known that the jobs have been created more in low-wage and part-time work than high-wage and full-time work. The purpose of this study is to analyze the differentiation of startups job in local labor market areas(LLMAs) in terms of job quantity as well as job quality. As the spatial unit, 121 local labor market areas which were delineated based on self-containment rate(demand and supply side of labor market) and numbers of resident workers are used. Also due to difference of the size of employment, LLMAs are classified into 3 groups: large, Medium, small LLMAs. The major results are as follows: First, the characteristics of the job creation are varied among 3 groups in terms of the quantitative and qualitative aspects. Highly waged and highly value-added jobs have been created more in large LLMAs, but full-time jobs created more in small LLMAs. Secondly, the job creation of LLMAs is somewhat weakly correlated to regional economic performance. While the quality of jobs is correlated to regional economic performance in Medium LLMAs, the quantity of jobs is significantly correlated to regional economic performance in small LLMAs. The results of this research give some implications for implementing the effective policy to create jobs related to regional economy, indicating that differentiated strategies for 3 groups of LLMAs is critically important.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.5
• /
• pp.622-637
• /
• 2017

Fatty acids such as n-3 and n-6 polyunsaturated fatty acids (PUFA) are critical nutrients, used to improve male reproductive performance through modification of fatty acid profile and maintenance of sperm membrane integrity, especially under cold shock or cryopreservation condition. Also, PUFA provide the precursors for prostaglandin synthesis and can modulate the expression patterns of many key enzymes involved in both prostaglandin and steroid metabolism. Many studies carried out on diets supplemented with PUFA have demonstrated their capability to sustain sperm motility, viability and fertility during chilling and freezing as well as improving testis development and spermatogenesis in a variety of livestock species. In addition to the type and quantity of dietary fatty acids, ways of addition of PUFA to diet or semen extender is very crucial as it has different effects on semen quality in male ruminants. Limitation of PUFA added to ruminant ration is due to biohydrogenation by rumen microorganisms, which causes conversion of unsaturated fatty acids to saturated fatty acids, leading to loss of PUFA quantity. Thus, many strategies for protecting PUFA from biohydrogenation in rumen have been developed over the years. This paper reviews four aspects of PUFA in light of previous research including rumen metabolism, biological roles, influence on reproduction, and strategies to use in male ruminants.