• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.681-689
• /
• 2009

Disk grinding was often applied to deburring process in order to enhance the final product quality. Inherent chamfering capability of the flexible disk grinding process in the early stage was analyzed with respect to various process parameters including workpiece length, wheel speed, depth of cut and feed. Initial chamfered edge defined as arc zone was characterized with local radius of curvature. Averaged radius and arc zone ratio was well evaluated using neural network system. Additional neural network analysis adding workpiece length showed enhance performance in predicting arc zone ratio and curvature radius with reduced error rate. A process condition design parameter was estimated using remaining input and output parameters with the prediction error rate lower than 2.0% depending on the relevant input parameter combination and neural network structure composition.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.63-69
• /
• 2012

As decreasing size of chips, the need of wafer level packaging is increased in semi-conductor and display industries. Temperature uniformity is a crucial factor in vacuum soldering process to guarantee quality of bonding between chips and wafer. In this paper, a stepwise iterative algorithm has been suggested to obtain output profile of each heat source. Since this algorithm is based on open-loop stepwise iterative experimental technique, it is easier to implement and cost effective than real time feedback controls. Along with some experiments, it was shown that the suggested algorithm can remarkably improve temperature uniformity of wafer during whole heating process compared with the ordinary manual trial-and error method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.2
• /
• pp.97-103
• /
• 2002

This paper deals with a PWM(Pulse Width Modulation) current amplifier using digital controller in order to generate a gradient magnetic field far the MRI(Magnetic Resonance Image) system. Because of tolerance of discrete devices, it is difficult to set accurate values of the control parameters and to make an analog-controlling circuit. However, using digital controller, it is possible to set exact control parameters and to adopt a modern control techniques. It is shown that the digital controller will highly enhance the output current response and it will improve the quality of the MRI.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.3-9
• /
• 2011

Simulation plays an important role for system analysis. In this study, a manufacturing system has been analyzed through computer simulation. We first briefly explain the considered system with prevailing problems. We then build a simulation model using ARENA simulation language. Based on two selected performance measures, material transporter load and hourly throughput, explicit system analyses have been performed. We addressed four parameters - variation of the processing time, number of raw material transporters, quality failure rate, and machine failures - as the input parameters affecting the output measures selected. We adopted Taguchi's orthogonal array in statistical experimental design and drew meaningful results from the analysis. The results given in the study may provide a good guidance for practical applications.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.176-185
• /
• 2015

The study aims to a design hybrid frequency synthesizer in spectrum analyzer and to propose new techniques designed for evasion of in-band spurious. The study focuses on calculating the exact location of multiple phase locked loop of hybrid frequency synthesizer and spurious of direct digital synthesizer to evade in-band spurious outside of frequency range that the user wants to see and thereby simulating technique to improve input related spurious of spectrum analyzer for algorithm. The proposed technique is designed to calculate spurious evasion algorithm in central processing system when in-band spurious arises, and to move output frequency of DDS(direct digital synthesizer) into the place where no in-band spurious exists thereby improving performance of frequency synthesizer. The study used simulation and result representation to prove the effectiveness of the proposed technique.

• Journal of Applied Reliability
• /
• v.2 no.1
• /
• pp.23-32
• /
• 2002

As the function of digital products gets diverse and complex, more than 30~40% job of software developing and testing group within its development cycle, concentrates on the software testing[1]. To cope with consumers'quickly changing needs, development cycle time gets short, and the number of model and test items increase steadily This is why automating software basic function and UI(User Interface) verification is needed [4][5][6]. This paper draws many strength and weakness defines Input/Output through integrating mobile phone, DVDP, PDA, and Black-Box (Intrusive (mobile) or Non-Intrusive(DVDP, PDA)) testing systematically, which brought above the 64% average of automation rate, and ensure 80% of test coverage [4][5][6].

• Journal of Applied Reliability
• /
• v.12 no.4
• /
• pp.275-285
• /
• 2012

This paper presents a changes of luminescence property for converted white LEDs with the commercially available silicate phosphor. If silicate phosphor's quantity increase step by step. luminescence property will be changing. we analyze luminescence property for these change and carry out the high temperature aging test for 7,000 hours, the high temperature and humidity aging test for 7,000 hours for reliability. LED degradation not only results in reduced light output but also in color changes. so we monitor correlated color temperature (CCT), chromaticity coordinates(x, y) and spectrum intensity. Those results suggest that humidity factor more bad effect in color changes than temperature factor and Lighting quality is related with quantity of phosphor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2001

High-quality sumdard lamps of total luminous flux were developed to be used as a reference source for measuring light output of qJtical sources using an integrating sphere in the Iigbting industry. These standard lamps have the uniform spatial intensIty distribuuons and the stability better than 0.5 % for the bmning tirre of 100[h].100[h].

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.166-171
• /
• 2002

We are in transitional period of welding technique, which has changed from the stage of quantity and quality to the stage of future technique, imported and introduced from many advanced countries. Therefore, many researches and studies for development on high speeding and making welding machines with high effectiveness has been doing vigorously. In this dissertation, I have studied on a pulsed MAG welding machine, with which welding of thin plates may perform high speeding and effecting. First, I produced a phase shifted full bridge DC-DC convert, which is the type of reduced conduction loss and the power supply for welding machine. And then, I found out an output waveform control algorithm about one pulsed one droplet and short waveform control for thin plates with high speed by deriving the circuit model utilizing the circuit averaged method for full bridge converter.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.292-293
• /
• 2017

In the single type mechanical compressor mounted on the refrigerated vehicle, one compressor is responsible for the refrigerator function of the air conditioner and the refrigerator, so it is difficult to maintain a certain refrigeration temperature in the summer. Particularly, in a mechanical compressor using an engine as a power source, the refrigeration quality is deteriorated due to unstable rotation of the engine. In this paper, we propose a three - phase inverter of a dual compressor system that uses an electric compressor separately from a mechanical compressor of a refrigerated vehicle. The output characteristics of the developed inverter were verified through a vehicle air conditioning simulator.