• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.3
• /
• pp.251-256
• /
• 2000

This report analyzes the Source Qualification Test which is composed of main functional and environmental tests for the localizing avionics(electronic subsystem for aircrafts and spacecraft) and high performance mechanical subsystem. Especially the detail test approaches of integrated servo actuators which is the main part to supply the power to the main and other flying control panel. Nowadays this subsystem works with mechanical and electrical engineering technique. In detail, electrical signal is used as input and transferring tool and mechanical part is the output as a power and manufacture the physical dimensions and functions. Finally in this review, the new test procedure to prove the function by the new manufacturer is established.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1071-1090
• /
• 2016

Most of scheduling methods in the Grid only consider one special attribute of the resource or one aspect of QoS (Quality of Service) of the job. In this paper, we focus on the problem that how to consider two aspects simultaneously. Based on the requirements of the jobs and the attributes of the resources, jobs are categorized into three kinds: CPU-overload, memory-overload, and bandwidth-overload jobs. One job may belong to different kinds according to different attributes. We schedule the jobs in different categories in different orders, and then propose a scheduling method-MTS (multiple attributes scheduling method) to schedule Grid resources. Based on the comparisons between our method, Min-min, ASJS (Adaptive Scoring Job Scheduling), and MRS (Multi-dimensional Scheduling) show: (1) MTS reduces the execution time more than 15% to other methods, (2) MTS improves the number of the finished jobs before the deadlines of the jobs, and (3) MTS enhances the file size of transmitted files (input files and output files) and improves the number of the instructions of the finished jobs.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.1
• /
• pp.63-73
• /
• 1990

Low cost automatic welding machine is developed for the purpose of welding process automation of automobile parts with two dimensional welding joints. Developed gantry type machine is equipped with X, Y and roll axis stepping motors, and dirive units units are designed by two phase on drive scheme using shift registers. Control system is constructed by single board microcomputer of Z80A CPU, and also it is equipped with parallel input output ports and counter-timer chips. Linear and circular interpolation of welding head movement is accomplished by employing software digital differential analyzers. It has been shown that contour error of develped system is withi ${\pm}1.0mm$, meaning that the machine is suitable for CO2 arc welding process of automoble parts and is expected it's application to industry.

• Pediatric Infection and Vaccine
• /
• v.15 no.1
• /
• pp.20-29
• /
• 2008

The basis of the economic evaluation of vaccination is the balance between the use of the resources (input) and the improvements that result from the vaccination (output). Techniques used for economic evaluation of vaccination are cost analysis, cost-minimization analysis, cost-effectiveness analysis, cost-utility analysis and cost-benefit analysis. Cost analysis seeks to characterize the costs of a given vaccination program. Cost-effective analysis is to helps policy-makers decide on the best use of allocated resources, whether cost-benefit analysis is to helps policy-makers decide on the overall allocation of resources. Cost-utility analysis is a specific form of cost-effective analysis in which outcomes are reduced to a common denominator such as the quality-adjusted life year (QALY) or disability-adjusted life year (DALY). Many economic analyses have been conducted on vaccines in the world, but there have been a little studies on economic evaluation on vaccines in Korea. This paper reviewed the methodology used to economic evaluation on vaccines and immunizations and addressed some examples of the methods.

• Journal of Welding and Joining
• /
• v.21 no.6
• /
• pp.26-32
• /
• 2003

Arc welding process has indicated that it suffers from many flaws. It's because requirement of products is diverse and factors which affects the quality is also various. Therefore, in order to stabilize the welding process, it is important to choose a proper welding machine for the each process, and to evaluate the welding process capability of each machine. In this study, rational and simple index to evaluate the welding machine was set the coefficient of resistance variation through the arc stability examination such as spatter generation weight and bead configuration uniformity etc. And the method to evaluate the process capability index was developed by application of 6$\sigma$.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.10
• /
• pp.847-850
• /
• 2002

Stochastic process analysis is often based on Monte Carlo simulations. As a more rigorous alternative, a deterministic algorithm based on numerical integration is proposed in this paper. which calculates the probability distributions of dependent random variables using the results of simulation with grid points of independent random variables. For performance evaluation, the proposed algorithm is applied to an example problem which can be analytically solved. and the result is compared with that of Monte Carlo simulation. The proposed algorithm is suitable for general process simulation problems with a few independent random variables, and expected to be applicable to areas such as safety analysis and quality control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.798-803
• /
• 2007

In case of minimized digital camera and mobile digital camera, it's difficult to get the high quality image by conventional AE(Auto Exposure) algorithm because of restriction of system organization. In this paper, a new algorithm that adopts a target setting, a compensation of feedback delay and a gamma correction, etc, are suggested for improving a noise increase and an output sensitivity decrease due to system minimization. We also suggest a method using fuzzy logic which can decide more effectively the ES(Electric Shutter) value and the AGC(Analog Gain Control) value than conventional system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.99-103
• /
• 2004

Aperture has been employed on the ground plane in the Hairpin resonator. Aperture made by etching the part of the ground effected coupling coefficient and then quality factor of Hairpin resonator has been increased. When the hair pin oscillator using aperture has been compared with the conventional hair pin oscillator using microstrip, it has been improved the phase noise about 19dBc ＠100KHz. Oscillation frequency of the hair pin oscillator using aperture has been 5.83GHz band and output power is -4.33dBm.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.9
• /
• pp.109-117
• /
• 1997

A new relaxation algorithm based on distribution of matched errors and possibility is proposed to solve efficiently correspondence problem. This algorithm can be applied to various method, such as BMA, feature-, and region-based matching methods, by modifying its smoothness function. It consists of two stages which are transformation and iteration process. In transformation stage, the errors obtained by any matching algorithm are transformed to possibility values according to these statistical distribution. Each grade of possility is updated by some constraints which are defined as smoothness, uniqueness, and discontinuity factor in iteration stage. The discontinuity factor is used to reserve discontinuity of disparity. In conventional methods, it is difficult to find proper weights and stop condition, because only two factors, smoothness and uniqueness, have been used. However, in the proposed mthod, the more smoothing is not ocurred because of discontinuity factor. And it is efective to the various image, even if the image has a severe noise and repeating patterns. In addition, it is shown that the convergence rate and the quality of output are improved.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.28-32
• /
• 2003

Aperture has been employed on the ground plane in the Hair Pin resonator. Aperture made by etching the part of the ground effected coupling coefficient and then quality factor of Hair Pin resonator has been increased. When the hair pin oscillator using aperture has been compared with the conventional hair pin oscillator using microstrip, it has been improved the phase noise about 19dBc @100KHz. Oscillation frequency of the hair pin oscillator using aperture has been 5.83GHz band and output power is -4.33dBm.