• Journal of Wetlands Research
• /
• v.6 no.2
• /
• pp.57-63
• /
• 2004

More than 1000 natural and constructed wetlands have been used to improve water quality. The general results showed that the highest removal efficiency was 84% for BOD and the lowest one was 48% for total nitrogen concentration. In addition, total phosphous removal efficiency was 67%, and the removal efficiencies are related to inflow loading. Researches donducted in Korea have focused on input-output mass balance and uptake by aquatic plant. As such little information if available about complex processes regulating water quality and role of microbes. Therefore, to determine the optimal design for construct, and methods to operate constructed wetland, researches about complex mechanisms of contaminant removal and interdisciplinary researches are necessary.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1280-1285
• /
• 2011

Recently, due to the use of fossil fuels for electric power production, carbon emissions increased excessively. Thereby, in order to replace fossil fuels, many studies about fossil fuels such as solar and fuel cell energy source are progressing. Fuel cell system has high energy conversion efficiency. Also, fuel cell system is environmentally friendly system because the carbon emission is almost not occur. Therefore, the fuel cell system is considered as the core technology of in the fields of the future energy and environmental. Fuel cell system has an effect on distribution power system because another power source of other than large power plants. So, fuel cell system can be degradation reason of power quality in the power system. In this paper, we constructed the system for an assessment on harmonics effect. The system is composed with power source, harmonics generation and linear load, fuel cell system. we also performed assessment on harmonics effect in customer and the distributed power system during grid connection of residential fuel cell system. An assessment cases are divided into three. A Case 1 is state that residential load and fuel system are connected to grid, Case 2 is state that residential load and harmonics load are connected to grid, and Case 3 is state that all loads are connected to grid. As a output of fuel cell system is increase, analysis results based on assessment system showed that power quality became more aggravation as effect of harmonics.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.138-144
• /
• 2016

Purpose: Phosphorus is an essential element for water quality control. Excessive amounts of phosphorus causes algal bloom in water, which leads to eutrophication and a decline in water quality. It is necessary to maintain the optimum amount of phosphorus present. During the last decades, various studies have been conducted to determine phosphorus content in water. In this study, we present a comprehensive overview of colorimetric, electrochemical, fluorescence, microfluidic, and remote sensing technologies for the measurement of phosphorus in water, along with their working principles and limitations. Results: The colorimetric techniques determine the concentration of phosphorus through the use of color-generating reagents. This is specific to a single chemical species and inexpensive to use. The electrochemical techniques operate by using a reaction of the analyte of interest to generate an electrical signal that is proportional to the sample analyte concentration. They show a good linear output, good repeatability, and a high detection capacity. The fluorescence technique is a kind of spectroscopic analysis method. The particles in the sample are excited by irradiation at a specific wavelength, emitting radiation of a different wavelength. It is possible to use this for quantitative and qualitative analysis of the target analyte. The microfluidic techniques incorporate several features to control chemical reactions in a micro device of low sample volume and reagent consumption. They are cheap and rapid methods for the detection of phosphorus in water. The remote sensing technique analyzes the sample for the target analyte using an optical technique, but without direct contact. It can cover a wider area than the other techniques mentioned in this review. Conclusion: It is concluded that the sensing technologies reviewed in this study are promising for rapid detection of phosphorus in water. The measurement range and sensitivity of the sensors have been greatly improved recently.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.250-256
• /
• 2008

In this paper, an X-band oscillator is presented using a new miniaturized microstrip hairpin resonator. The newly designed hairpin resonator on the microstrip line employs the spiral structure, which shows a higher loaded quality factor and the 50 % reduced circuit area compared to the conventional one at 9.2 GHz. The oscillator using proposed resonator shows the output power of 10.87 dBm, the second harmonic suppression of 41.99 dBc, and the phase noise performance of -101.49 dBc/Hz at 100 kHz offset, which is better than the conventional resonator oscillator by 6.17 dB.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.91-97
• /
• 2013

Image and it's processing techniques are widely applied and very important in the recent IT environment. In this paper, we try to reconstruct original BMP(Bitmap) image into indexed image and codebook utilizing vector quantization and represent high quality image only with same pixel depth of previous indexed image like JPEG etc. That is, By adopting common map method onto index image with $2^n$ color codebook, image can be represented as high quality as $2^{n+1}$ color codebook. When proposed output image is compared with original BMP image, it provides as much around 2dB as higher PSNR than conventional 8 bit index image(normal JPEG). Furthermore, this improvement(2 dB higher PSNR) could be provided when using the 9 bit indexed image.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.3
• /
• pp.384-388
• /
• 2003

Twenty yearling lambs of Southeast Nigeria dwarf, liveweight ($18{\pm}1.9 kg$) were grouped into 5 treatments. Dry brewer's grain was substituted for maize offal in the experiment diets namely A to E at 0%, 15%, 30%, 45% and 60% respectively, as supplement to low quality, dry season cassava leaf top and Andropogan gayanus hay at 1:1 ratio that lasted for 56 days. After which 5 of the lambs (average bodyweight=$24.3{\pm}1.5kg$) were transferred to metabolism crates to determine the digestibility and nitrogen/protein balance studies. While the mean group intakes were (945.9, 996.1, 1,040.5, 1,148.5 and 1,037.7 g conc. DM/day), the growth rates were (115.1, 124.1, 152.5, 168.5 and 123.1 g liveweight gain/day), respectively. There was a recorded decline in both intake (p>0.05) and growth rate (p<0.05) as the level of dry brewer's grain was increased beyond 45% of the supplement. Similar trend was observed on the protein and organic matter efficiency ratios (p>0.05) together with the organic matter intake. The urine nitrogen output was also significant (p>0.05). The work further revealed that, at a certain critical level of intake, dry brewer's grain is able to support growth rates measurable to or better than those noted when feeding maize offal to lambs, and went on to prove dry brewer's grain as an attractive supplementary feed for the drier months of the year, in the Southeast of Nigeria.

• Speech Sciences
• /
• v.10 no.3
• /
• pp.241-250
• /
• 2003

In this paper, we implemented the vocoder of variable rate by applying the SOLA-B algorithm to the G.729A to the TMS320C5416 in real-time. This method using the SOLA-B algorithm is that it is reduced the duration of the speech in encoding and is played at the speed of normal by extending the duration of the speech in decoding. But the method applied to the existed G.729A and SOLA-B algorithm is caused the loss of speech quality in G.729A which is not reflected about length variation of speech. Therefore the proposed method is encoded according as it is modified the structure of LSP quantization table about the length of speech is reduced by using the SOLA-B algorithm. The vocoder of variable rate by applying the G.729A and SOLA-B algorithm is represented the maximum complexity of 10.2MIPS about encoder and 2.8MIPS about decoder in 8kbps transmission rate. Also it is evaluated 17.3MIPS about encoder, 9.9MIPS about decoder in 6kbps and 18.5MIPS about encoder, 11.1MIPS about decoder in 4kbps according to the transmission rate. The used memory is about program ROM 9.7kwords, table ROM 4.69kwords, RAM 5.2kwords. The waveform of output is showed by the result of C simulator and Bit Exact. Also, the result of MOS test for evaluation of speech quality of the vocoder of variable rate which is implemented in real-time, it is estimated about 3.68 in 4kbps.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.133-141
• /
• 2010

The evaluation of Varian enhanced dynamic wedges (EDW) were performed in terms of quality assurance in external radiotherapy. The seven (10, 15, 20, 25, 30, 45, 60 deg.) EDW angles were evaluated for 6 and 15 MV x-rays in Varian Linac. The STT (segmented treatment table) for a field were calculated and compared with actual movement of the jaw using Dynalog files in order to evaluate mechanical operation. Two dimensional array detector and an ionization chamber were used to measure dose distributions in phantom from Linac. The mechanical movement of jaw was agreed with its expectation and two dimensional dose distributions including beam profiles were in agreement with RTP data approximately. In comparison with RTP calculations the percentage difference of output dose values for 100 MU irradiation was less than 2.9% and measured wedge factor was less than 2.6%. These results are shown that there is no problem in clinical applications of EDW equipped on this linac.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.121-126
• /
• 2004

The primary goal of six sigma is to improve patient satisfaction, and thereby profitability, by reducing and eliminating defects. Defects may be related to any aspect of customer satisfaction: high product quality, schedule adherence, cost minimization, process capability indices, defects per unit, and yield. Many six sigma metrics can be mathematically related to the others. Literally, six means six standard deviations from the mean or median value. As applied to quality metrics, the term indicates that failures are at least six standard deviations from the mean or norm. This would mean about 3.4 failures per million opportunities for failure. The objective of six sigma quality is to reduce process output variation so that on a long term basis, which is the customer's aggregate experience with our process over time, this will result in no more than 3.4 defect Parts Per Million(PPM) opportunities (or 3.4 Defects Per Million Opportunities. For a process with only one specification limit (upper or lower), this results in six process standard deviations between the mean of the process and the customer's specification limit (hence, 6 Sigma). The results of applicative six sigma experiment studied on 18 items TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA tests in clinical chemistry were follows. Assessment of process performance fits within six sigma tolerance limits were TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA with 72.2%, items that fit within five sigma limits were total bilirubin, chloride and sodium were 3 sigma. We were sure that the goal of six sigma would reduce test variation in the process.

• Korean journal of food and cookery science
• /
• v.8 no.2
• /
• pp.137-145
• /
• 1992

A computer-assisted microbiological quality assurance program was developed based on HACCP data obtained from a 500 bed general hospital by assessing time and temperature conditions and microbiological qualities of six categories of menu items according to the process of food product flow. The purpose of the study was to develop a computer-assisted microbiological quality assurance program in order to simplify the assessment procedures and to provide a maximum assurance to foodservice personnel and the public. A 16-Bit personnel computer compatible with IBM-PC/AT was used. The data base files and processing programs were created using dBASE III plus packages. The contents of the computerized system are summarized as knows: 1. When the input program for hazard analysis runs, a series of questions are asked to determine hazards and assess their severity and risks. Critical control points and monitoring methods for CCPs are identified and saved in Master file. 2. Output and search programs for hazard analysis are composed of 6 categories of recipe data file list, code identification list, and HACCP identification of the specific menu item. 3. When the user selects a specific category of recipe from 6 categories presented on the screen and runs data file list, a series of menu item list, CCP list, monitoring methods list are generated. When the code search program runs, menu names, ingredients, amounts and a series of codes are generated. 4. When the user types in a menu item and an identification code, critical control points and monitoring methods are generated for each menu item.