• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1724-1726
• /
• 1997

In this paper, a superposed discharge type ozonizer(CISDO) has been designed and manufactured. CISDO is equipped with three electrodes(central electrode, internal electrode and external electrode), and it is composed of two gaps. Ozone is generated by overlapping silent discharge, which is respectively came from two gaps. This paper describes the following two characteristics : (1) The characteristics of discharge with variation of output voltage of AC H.V source, quality of supplied gas and discharge voltage (2) The characteristics of ozone generation with variation of quality of supplied gas. discharge power, operating number.

• Journal of Drive and Control
• /
• v.17 no.3
• /
• pp.47-56
• /
• 2020

As a shift control of automatic transmission was managed with the electronic control unit (ECU), shift quality which is a measure of shift shock during gear change has markedly improved. However, the initial clutch pressure control of the clutch filling phase should continue to rely on the predetermined control input since the input and output speeds are unchanged until the shifting process attains the inertia phase. It is critical to minimize the clutch response time and control the clutch pressure accurately at the end of clutch fill to achieve quick shift response and smoothness. Advanced transmission companies have adopted an auto calibration method which establishes the databases for the clutch piston fill-up attributes and the frictional characteristics of the disks. In this study, a distinctive auto calibration algorithm for forklift transmission under development is proposed and verified with the real-vehicle test. The experimental calibration results showed consistent turbine dynamics at the initial stage of shifts with the properly calibrated clutch-fill control parameters. By using this technique, it is necessary to finalize the shift control for the various operation conditions.

• Nuclear Engineering and Technology
• /
• v.28 no.6
• /
• pp.594-601
• /
• 1996

To assure quality of safety critical software, software should be developed in accordance with software development procedures and rigorous software verification and validation should be performed. Software verification is the formal act of reviewing, testing or checking, and documenting whether software components comply with the specified requirements for a particular stage of the development phase [1]. New software verification methodology was developed and was applied to the Shutdown System No. 1 and 2(SDS1,2) for Wolsong 2, 3 and 4 nuclear power plants by Korea Atomic Energy Research Institute(KAERI) and Atomic Energy of Canada Limited(AECL) in order to satisfy new regulation requirements of Atomic Energy Control Board(AECB). Software verification methodology applied to SDS1 for Wolsong 2, 3 and 4 project will be described in this paper. Some errors were found by this methodology during the software development for SDS1 and were corrected by software designer. Output from Wolsong 2, 3 and 4 project have demonstrated that the use of this methodology results in a high quality, cost-effective product.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.149-161
• /
• 2012

The current environment of technological and competitive changes influences not only the business R&D environment but also government driven national R&D strategies. Open innovation has now become an important paradigm that is replacing the outdated paradigm of closed innovation. Many companies and nations have been increasing R&D investment because R&D has been considered a driving force for national and corporate competitive advantage. The purpose of this paper is to evaluate and compare the performance of R&D focused on open innovation according to scientific and technological outputs which is based on paper publications, patents and etc. Comparisons should not be only based on the quantity but also on the quality of the output. This paper shows that it is possible to develop DEA models that utilize the Analytical Hierarchical Process in order to transform the qualitative index into a quantitative index. Hence, the relative efficiency for R&D organizations is obtained based on both quantity and quality outputs and subsequently provides comprehensive and realistic methods for decision makers to identify levels of project efficiency.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.1 no.3
• /
• pp.42-50
• /
• 2013

Brand Equity plays a major role in the highly competitive Quick Service Restaurants (QSR) industry in India. There are a variety of factors which affect the brand equity that a company commands in the market. Integrated Marketing Communication (IMC) is an emerging concept in marketing wherein all the major promotional activities are used to create a synergic output and send across a clear and consistent message to the customers. This study aims to find out the impact of five major tools of IMC namely Advertising, Word of Mouth, Sales Promotion, Event Sponsorships and Public Relations which are most applicable in the QSR industry on the four major dimensions namely Brand Awareness, Brand Association, Perceived Quality and Brand Loyalty which aid in creating Brand Equity. The study was conducted by collecting data from a sample and analyzing the data using statistical tools to find any relationships between the above mentioned variables. The findings suggest that marketers should focus on building favorable opinion about the brand amongst customers and take care regarding the news published about the brand since it affects brand image. Moreover, it was also found out that making people aware about the brand and the perceived quality about the brand play the major role in creating brand equity more than other factors.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.53-60
• /
• 2014

The automatic arc welding is generally accepted as the preferred joining technique and commonly chosen for assembly of large metal structures such as in areas of automotive, aircraft and shipbuilding due to its joint strength, reliability, and low cost compared to other joint processes. Recently, several mathematical models have been developed and studied for control and monitoring welding quality, productivity, microstructure and weld properties in arc welding processes. This study indicates the prediction of process parameters for the expected welding quality with accordance to the adaptive GTA welding process. Furthermore, the mathematical models is also develop to aid the selection of an optimal welding process as the generation of process controls to predict the bead geometry as a function output parameters in the GTA welding process. The developed models through this study showed comparatively excellent predicted results, and will extend to other welding processes to integrate an optimized system for the robotic welding process.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.6
• /
• pp.486-496
• /
• 2016

The voltage unbalance of an LVDC bipolar distribution system was controlled for high power quality. Voltage unbalance may occur in a bipolar distribution system depending on the operation of the converter and load usage. Voltage unbalance can damage sensitive load and lead to converter accidents. The conditions that may cause voltage unbalance in a bipolar distribution system are as follows. First, three-level AC/DC converters in bipolar distribution systems can lead to voltage unbalance. Second, bipolar distribution systems can be at risk for voltage unbalance because of load usage. In this paper, the output DC link of a three-level AC/DC converter was analyzed for voltage unbalance, and the bipolar voltage was controlled with algorithms. In the case of additional voltage unbalance according to load usage, the bipolar voltage was controlled using the proposed converter. The proposed converter is a dual half-bridge converter, which was improved from the secondary circuit of a dual half-bridge converter. A control algorithm for bipolar voltage control without additional converters was proposed. The balancing control of the bipolar distribution system with distributed power was verified through experiments.

• Journal of Distribution Science
• /
• v.15 no.6
• /
• pp.37-46
• /
• 2017

Purpose - The paper aims to propose an optimization model for supporting the buyer-seller negotiations. We consider the price, quality, and delivery as evaluation criteria, also recognized as objectives for negotiation. Research design, data, and methodology - The methodology used in this paper involves the input-oriented DEA with the inverse optimization. Under the existence of several potential suppliers, the price would be considered to be the decision variable to conclude the negotiation so as to meet the desired level of the quality and delivery. The data set for six suppliers with three criteria is examined by the proposed approach. Results - We present the decision aid model by displaying the price spectrum as the changes of desired output levels. It overcomes the shortcomings from previous researches mainly based on the discrete types of scenario generations. This approach shows that the obtained results help the buyer understand the trade-offs between price and performance when he/she considers the negotiation. Conclusions - The paper contributes to the numerical models for buyer-supplier negotiation in that the model for the supplier evaluation and selection is closely linked with the model for negotiation. In addition, it eliminates the unrealistic negotiation strategy, and provides the negotiation strategies that the buyer would not shift the burden on suppliers by maintaining the current efficiency.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.3
• /
• pp.6-11
• /
• 2006

This paper describes the novel control techniques design of VSC(Voltage Sag Corrector) for the purpose of power line quality enhancement. A fast detecting technique of voltage sag is implemented through the detection of instantaneous value on synchronous rotating dq-reference frame. The first order digital filter is added in the detection algorithm to protect the insensitive characteristics against the noise. The relationship between the total detection time and cut-off frequency of the filter is described. The size of the capacitor bank used as the energy storage element is designed from the point of view of input/output energy with circuit analysis. Finally, the validity of the proposed scheme is proven through the simulated results.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.156-165
• /
• 2004

Concentrations of substrates, glucose, and ammionia in biological processes have been on-line monitored by using glucose-flow injection (FIA) and ammonia-FIA systems. Based on the on-line monitored data the concentrations of substrates have been controlled by an on-off controller, a PID controller, and a neural network (NN) based controller. A simulation program has been developed to test the control quality of each controller and to estimate the control parameters. The on-off controller often produced high oscillations at the set point due to its low robustness. The control quality of a PID controller could have been improved by a high analysis frequency and by a short residence time of sample in a FIA system. A NN-based controller with 3 layers has been developed, and a 3(input)-2(hidden)-1(output) network structure has been found to be optimal for the NN-based controller. The performance of the three controllers has been tested in a simulated process as well as in a cultivation process of Saccharomyces cerevisiae, and the performance has also been compared to simulation results. The NN-based controller with the 3-2-1 network structure was robust and stable against some disturbances, such as a sudden injection of distilled water into a biological process.