• International Area Studies Review
• /
• v.20 no.1
• /
• pp.237-250
• /
• 2016

This paper is to explore the relationship between the San-Nong expenditure and Quality of life of rural residents in China for the period of 1978-2013, using the unit root test, the Granger causality test, the cointegration test, VAR model, and VECM. The results of a study on the relationship between two variables show that an obvious mutually causal relationship exits between the financial expenditure for San-Nong(san) and gross output value of agriculture, forestry, animal husbandry and fishery(apro) in China. But the case of per capita ploor space of newly built residential buildings in rural area(rho) and per capita consumption expenditure of rural households(rli) show that the financial expenditure for San-Nong(san) press for improvement in the quality of life of rural residence, while rho and rli have not yet apparent effect to san. On the other hand, It showed that the financial expenditure for San-Nong(san) and the number of medical personnel(prdo) do not have a causal relationship with each other. Therefore, the government needs to find ways for a variety of San-Nong expenditure to improve the quality of life of rural residents.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.177-184
• /
• 2016

Recently linear accelerator of radiation therapy intensity modulated radiation therapy, stereotactic radiation therapy are widely used. Such radiation treatment techniques are generally difficult to exclude the small field by using the inverse treatment plan. It is necessary to dose an accurate measurement of characteristics of the small field. Thus, using different detectors to measure the volume of the effective percentage depth dose, beam profile, and the output factor of the small field was to evaluate the dose characteristics of each detector. Experimental results for the X-ray beam 6 MV energy beam quality($PDD_{20}/PDD_{10}$) is $10{\times}10cm^2$ Diode detector is as high as 2.4% compared to Pinpoint detector. All field size to lesser effective volume of Diode detector shows that it is far better than other detectors by more than 50% of small penumbra, therefore spatial resolution far excellent. In field size $2{\times}2cm^2$ Semiflex detector was measured about 2% less than the other detector. Field size $1{\times}1cm^2$ is that there is no judgment about the validity show the difference between 20%. Field size $1{\times}1cm^2$ from the measured values of the Diode detector and Pinpoint detector showed a 13% difference. Less than field size $3{\times}3cm^2$ the feed to the difference between the output factor of the effective volume of the detector to be used for the effective volume available to the detector.

• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.223-230
• /
• 2020

In this paper, we have studied the characteristics of stimulated Brillouin scattering (SBS) and mode instability (MI) in a ytterbium-doped polarization-maintaining fiber laser with master oscillator power amplifier configuration. We measured the laser output power and back-reflection spectrum for a variety of ytterbium-doped fibers and seed lights, to investigate the power-scaling limits of fiber lasers. By optimizing the laser structure, we demonstrated an all-fiber high-power polarization-maintaining fiber laser with near-diffraction-limited beam quality. The output power of 1.5 kW was achieved with a linewidth of 10 GHz, generated by pseudo-random binary sequence (PRBS) phase modulation. The beam quality M² was about 1.15 at the maximum output power. The polarization extinction ratio (PER) was greater than 17 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.400-409
• /
• 2017

We have studied a combiner that can withstand high power while minimizing insertion loss in high frequency band. In particularly, because the output power that can be output per unit elements is much lower in the Ku band and above than in the low frequency band, it is necessary to combine many semiconductor elements in order to make a high power SSPA. A planar combiner such as a microstrip, as the number of elements to be combined increases, the insertion loss increases proportionally, resulting in a reduction in the overall system efficiency and an increase heating value also. The planar combiner also have some problems due to the low power handling rate. To improve these problems, we proposed a Cavity Radial Combiner. A Ku band 16-way Cavity Radial Combiner was fabricated and measured. As a result, it was tested 14dB return loss and over 94.5 % output combining efficiency in design band.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.29-39
• /
• 2010

This paper presents and analyzes laboratory test results of distributed translator (DTxR) for distributed frequency network (DFN) in the ATSC (Advanced Television Systems Committee) terrestrial digital TV broadcasting system. The DTxR laboratory test is classified to receiving part test and transmitting part test. The receiving part test includes dynamic range, random noise, single echo, and adjacent channel interference. The transmitting part test includes quality of output signal (out-of channel emission, quality of transmitting signal, and phase noise), frequency synchronization among output signals, and TxID (Transmitter Identification) signal's affect to the legacy receiver. By the laboratory test results, the receiving part of DTxR eliminates average -2.5 dB of single echo and has average 17.5 dB at TOV (Threshold of Visibility) under random noise environment. In addition, the transmitting part of DTxR satisfies the specification of US FCC (Federal Communications Commission), and frequency difference among DTxR output signals is less than 0.001 Hz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.695-700
• /
• 2018

This paper presents the development of compact and lightweight broadband power amplifier module using HMIC (Hybrid Microwave Integrated Circuit) technology that could be high-density integration for many non-packaged microwave components into the small area of a high dielectric constant printed circuit board, such as a ceramic substrate, also using the special design and fabrication schemes for the structure of minimized electromagnetic interference to obtain the homogeneous electrical performance at the wideband frequency. The results confirmed that the small signal gain has a gain flatness of ${\pm}1.5dB$ within the range of 32 to 36 dB. In addition, the output power satisfied more than 30 dBm. The noise figure was measured within 7 dB, and OIP3 (Output Third Order Intercept Point) was more than 39 dBm. The fabricated broadband power amplifier satisfied the target specification required to electrically drive the high power amplifiers of jamming generators for electronic warfare, so the actual applicability to the system was verified. Future studies will be aimed at designing other similar microwave power amplifiers in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1711-1717
• /
• 2020

X-ray of up to 9MeV are used for container inspection. X-ray intensity must be maintained stably regardless of changes in time. If dose is not constant, it may affect the image quality, and as a result, may affect the inspection of abnormal cargo. Therefore, to acquire high-quality images, continuous dose monitoring is required. In this study, the ion-chamber based device was developed for monitoring the dose change in high-energy x-ray. And to estimate the performance of signal-processing device change according to the environmental change, the output changing due to the change of temperature and humidity was observed. In addition, verification of the device was performed by measuring the output change. As a result of the measurement, there was no significant difference in performance due to changes in temperature and humidity, and the change in output according to the change in exposure was linear. Therefore, it was found that the developed device is suitable for the dose monitoring of high-energy x-ray.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.60-68
• /
• 2020

Owing to the complexity and modernization of weapon systems, the role of the defense industry in producing military companies has become increasingly important. In the past defense industries, price competitiveness is a key factor in product choice. On the other hand, product quality is becoming increasingly important compared to price competitiveness. In particular, improving the quality efficiency of small and medium defense suppliers is a necessary part of realizing completed weapon systems, and measures are required to evaluate the quality efficiency of small and medium defense suppliers objectively. This study measured the efficiency of quality using DEA, which is one of the decision methodologies. To use DEA, the number of employees (QA Team) and the number of improvement requirements (Through the activity of onsite quality-support team in aeronautical system center) were set as the input variables. In addition, the output variables were based on sales and the number of certification acquisitions (QMS). To analyze the quality efficiency of small and medium defense suppliers in the aeronautical field, both CCR and BCC models were analyzed, and the scale efficiency values were derived. Strategic development plans for small and medium defense suppliers can be guided using the research results.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.577-587
• /
• 2023

The utilization of crowdsourced spatial data has been actively researched; however, issues stemming from the uncertainty of data quality have been raised. In particular, when low-quality data is mixed into drone imagery datasets, it can degrade the quality of spatial information output. In order to address these problems, the study presents a methodology for automatically validating the geometric quality of crowdsourced imagery. Key quality factors such as spatial resolution, resolution variation, matching point reprojection error, and bundle adjustment results are utilized. To classify imagery suitable for spatial information generation, training and validation datasets are constructed, and machine learning is conducted using a radial basis function (RBF)-based support vector machine (SVM) model. The trained SVM model achieved a classification accuracy of 99.1%. To evaluate the effectiveness of the quality validation model, imagery sets before and after applying the model to drone imagery not used in training and validation are compared by generating orthoimages. The results confirm that the application of the quality validation model reduces various distortions that can be included in orthoimages and enhances object identifiability. The proposed quality validation methodology is expected to increase the utility of crowdsourced data in spatial information generation by automatically selecting high-quality data from the multitude of crowdsourced data with varying qualities.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.4 no.1
• /
• pp.29-65
• /
• 2009

This study is The Effect of the on the purchase behavior of the Software Quality. To have purchased the software in a Consumer surveys were conducted. The following is a summary of results of this research. First, the software quality and significant consumer purchasing behavior (+) of influence. Functionality, usability, portability of software quality attributes the impulse buying and buy more of both the (+) showed the influence. Second, software quality is urge consumers to purchase significant (+) of influence. Functionality, reliability, usability, portability of software quality (+) showed the influence. Third, the software quality In the consumer buy more significant Chung (+) showed the influence. Software quality, functionality, usability, portability name (+) influence. In conclusion, the quality of the software in consumer purchasing behavior (+) were of significant influence. In particular, factors that functionality, usability factors, portability factor in the relatively large influence on the purchasing behavior. Software technology development, planning, development, testing, and in each step must keep in mind the following. First, the software, when used in certain conditions, Inherent ability to meet the needs and requirements set forth to provide the appropriate functionality and accuracy as the ability of software products each other with the capabilities to the effective and thorough security features should be required. Second, software, a user-specified criteria to use in understanding and learning, and must, and the ability to prefer. Software for users to understand and easy to use, whether the check. In particular, understanding the interface, Help understanding, understand the input and output data, and interface consistency, the user information, the message must be equipped and easy to understand. In addition, ease of learning to be self-learning, and help ease of access shall be required. Third, in certain circumstances, a different environment to transfer be equipped with the functionality of the software. Applying data structures and application environment, helping transplant convenience must keep in mind sex.