• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.457-464
• /
• 1998

A drying speed control system using fuzzy logic was developed in order to minimize the damage of rice quality for a large capacity continuous dryer. The performance of the system was tested at two object moisture content of 17% and 25% on a wet basis. For object moisture content of 17% on a wet basis, the final output moisture contents from 20.46%, 20.96%, 18.98% on a wet basis were 17.99%, 17.6% and 17.23% on a wet basis, respectively. For object moisture content of 25% on a wet basis, the final output moisture contents from 28.85%, 26.95%, 28.11%, 27.8% on a wet basis were 25.24%, 24.9%, 25.23% and 25.09% on a wet basis, respectively.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.69-72
• /
• 2004

In this paper, we measured the electrical and optical characteristics of an electrodeless fluorescent lamp system as product of the inside and outside of the country and compared the measured data. Output current wave of domestic 150 W is unstable than it's of Endura 150 W. But the former of spend time after discharging and output current value is small than the latter. And optical characteristics(brightness, flux, color rendering index, efficiency) value of the former is a little small than the latter. In conclusion, if we improve a little more quality then we must secure the superiority in competition.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.138-146
• /
• 2010

On wind turbine generators, the speed and volume of the wind affect the turbine angle speed which finally determines the output level of the electric power. However it is very difficult to forecast correctly the future power output and quality based on previous fixed sampling methods. This paper proposes a variable sampling method based on Buneman frequency estimation algorithm to reflect the variations of the frequency and amplitude on wind power outputs. The proposed method is also verified through the performance test by comparing with the results from previous fixed sampling methods and the real measurement data.

• Journal of Power Electronics
• /
• v.8 no.1
• /
• pp.51-59
• /
• 2008

This paper addresses several issues concerning the analysis, design, modeling, simulation and development of single-phase, single-switch, power factor corrected AC-DC high frequency switching converter topologies with transformer isolation. A detailed analysis and design is presented for single-switch topologies, namely forward buck, flyback, Cuk, Sepic and Zeta buck-boost converters, with high frequency isolation for discontinuous conduction modes (DCM) of operation. With an awareness of modem design trends towards improved performance, these switching converters are designed for low power rating and low output voltage, typically 20.25W with 13.5V in DCM operation. Laboratory prototypes of the proposed single-switch converters in DCM operation are developed and test results are presented to validate the proposed design and developed model of the system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.254-256
• /
• 2000

본 논문에서는 여러 단계의 QoS(Quality of Service)를 지원하면서 빠르고 확장이 용이하며 각종 패킷 폐기(packet drop) 방식을 지원하는 평형 파이프라인 우선순위 아웃풋 큐 구조(balanced pipelined priority output queue architecture)를 제시하고 있다. 본 방안은 기존에 연구된 파이프라인 우선순위 힙(pipelined heap, P-heap)[1]을 기반으로 하고 있다. 파이프라인 우선순휘 힙은 우선순위에 따라 패킷을 전송하는 작업을 파이프라인 방식으로 처리하여 처리 성능을 향상시킨 아웃풋 큐 구조이다. 그러나 P-heap은 평형성(balance) 문제를 전혀 고려하고 있지 않으며, 다양한 패킷 폐기 방안을 제공하고 있지 못하다. 본 논문에서는 이런 측면에서 P-heap을 개선한 Advanced P-heap을 제안하고 있다. Advanced P-heap은 평균적인 상황에서 힙에 평형성을 부여하고, 각종 패킷 폐기 정책을 지원할 수 있는 일반적인 우선순위별 차별 패킷 구조를 제시하고 있다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.639-643
• /
• 2009

A reformer, which produces hydrogen from natural gas, plays a major role for producing quality hydrogen to fuel-cell system. In this paper, fuel processor is designed to deliver hydrogen(75%) from the reformer to 200W fuel-cell system, and the electrical output power of the fuel-cells is examined by being injected different hydrogen concentrations to the system. We verified that the output power characteristics of the fuel-cells with 75% reformed hydrogen was lower about 7% than the case of pure hydrogen supplied. The type of reformer in this experiment takes SMR(Steam methane reforming) process, and the temperature variation characteristics of reforming process by reactions are examined in operation.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2098-2106
• /
• 2014

In the area of clustering, there are numerous approaches to construct clusters in the input space. For regression problem, when forming clusters being a part of the overall model, the relationships between the input space and the output space are essential and have to be taken into consideration. Conditional Fuzzy C-Means (c-FCM) clustering offers an opportunity to analyze the structure in the input space with the mechanism of supervision implied by the distribution of data present in the output space. However, like other clustering methods, c-FCM focuses on the distribution of the data. In this paper, we introduce a new method, which by making use of the ambiguity index focuses on the boundaries of the clusters whose determination is essential to the quality of the ensuing classification procedures. The introduced design is illustrated with the aid of numeric examples that provide a detailed insight into the performance of the fuzzy classifiers and quantify several essentials design aspects.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.152-154
• /
• 2005

This paper proposes the new subfield method to erase reverse gray levels and low gray level contour in AC plasma display panel(PDP). In the conventional method, it is supposed that output luminance levels of a PDP increase regularly. But actual output luminance levels of a PDP increase irregularly. Therefore, conventional methods are unable to effectively reduce low gray-level contours and reverse gray levels. Accordingly, a new subfield method is applied to improve the low gray-level expression in PDP. Conclusively this paper clear proof that a new subfield method can suppress low gray-level contours and reverse gray levels more effectively than conventional methods.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.22-25
• /
• 1999

A brushless DC motor has the high quality of torque output and silence, has been more widely used in industrial area. As the driver and controller of BLDC motor have been more complicated and precise, simulation method has been much used in motor design. And the output characteristics of BLDC motor is determined by the waveform of BACK-KMF in instinct. But because the conventional model of BLDC motor is obtained by approximation of real nonlinear waveform to ideal trapezoidal waveform, the error is occurred in simulation result. Thus in this paper, for the correction of this error in simulation, the model of real nonlinear waveform considered is proposed, and the simulation result is obtained in case of three-phase, four-poles Y-connected, surface mounted permanent magnet BLDC motor.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.576-578
• /
• 1989

This paper describes a new pwm scheme of variable speed control for induction motor. The proposed scheme have the programmed pwm switching pattern which have the doninant harmonic elimination over the wide range of output speed in induction motor. Experimental results of proposed scheme hare high quality output current, voltage and torque than that of conventional pwm scheme. Therefore proposed scheme have the smooth operation and suitable for variable speed control in induction motor.