• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.697-707
• /
• 2015

This paper covered the design and implementation of the demodulation receiver in the ADS-B 1090ES system, which is one of the CNS/ATM's surveillance systems. This researched demodulation performed at the level required by RTCA DO-268B and EUROCAE ED-129. The single signal process method, which applies a baseline multi-sample technique among multi-amplitude sample demodulations, was suggested to improve the quality of the receiver signal, the dynamic range and so on. The suggested multi-signal level tuning method has enhanced the single-signal process method, reducing the unstable reception ratio by the transmit output level difference and manufacturing receiver hardware. The result was that the receiver suggested by the method had 0~87dBm in dynamic range and -90dBm in MTL. This shows a better performance by -3dBm less than the international standard in ADS-B 1090ES ground receiver equipment. The systems which use a similar modulation method, will be considered to be widely applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.161-166
• /
• 2018

In this paper, we propose a method for the random selection of pooling operations for the regularization and reduction of cross validation in convolutional neural networks. The pooling operation in convolutional neural networks is used to reduce the size of the feature map and for its shift invariant properties. In the existing pooling method, one pooling operation is applied in each pooling layer. Because this method fixes the convolution network, the network suffers from overfitting, which means that it excessively fits the models to the training samples. In addition, to find the best combination of pooling operations to maximize the performance, cross validation must be performed. To solve these problems, we introduce the probability concept into the pooling layers. The proposed method does not select one pooling operation in each pooling layer. Instead, we randomly select one pooling operation among multiple pooling operations in each pooling region during training, and for testing purposes, we use probabilistic weighting to produce the expected output. The proposed method can be seen as a technique in which many networks are approximately averaged using a different pooling operation in each pooling region. Therefore, this method avoids the overfitting problem, as well as reducing the amount of cross validation. The experimental results show that the proposed method can achieve better generalization performance and reduce the need for cross validation.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.123-134
• /
• 2005

This research aims at developing a new method which can replace the existing method. known as the quality factor(Q factor) method by an L-R-C test for use in the performance test of inductive loop detectors(ILD) being installed and maintained. In this study, a sensor to detect a magnetic field in terms of frequency and intensity, a method to collect field data, the method of analysis, and the method of diagnosis were developed. An automatic diagnosis system which was developed to overcome those drawbacks has the following features : First, field data is collected automatically by a test vehicle equipped with magnetic field sensors that is running can be said to along the roadway and. thus, the new system completely overcome the roadway and, thus, the new system can be said to completely overcome the inefficiency of the existing method second, since the magnetic fold generated from the ILD is the final output of the whole system of ILD, the existing problem has been solved. third. since each of the detection area by height is collected by the magnetic sensors installed by height. a basic for the identification of the vehicle types to be detectable and the setting of adjustment factors has been made. For the automatic diagnosis system developed during in this study, a reliability test was carried out by comparing vehicle times of ILD installed ideally.

• Korean journal of communication and information
• /
• v.31
• /
• pp.193-223
• /
• 2005

As the number of TV channels rapidly grows, the systematic marketing and PR communication of broadcasters are becoming more and more important. To overcome the challenges the sharply increased competition poses, TV stations ave to intensify their strategic marketing efforts. This paper analyses the editorial information aired about the broadcasters and their TV programming as part of the PR efforts made. This present research project is based on one week periods of analysis of TV programming produced and aired by German broadcasters. The program analysis of the five TV channels included in this study revealed a total of 406 cases in which editorial references were made. The result shows no systematic differences between the public and commercial Broadcasters. Channel-specific differences are, however, obvious. PR communication embedded in the regular programs is increasingly tied to media organization and frequently occurs in the reporting of journalistic content. The high number of promotions as part of informational, and even more so as part of magazine and news formats, must be viewed as problematic. Program related branding and the specific tools used to promote the programs provided further evidence regarding the importance of media economic factors. TV channels not only promote their own programs, but also those of affiliated stations, and the increasing influence of economic considerations will have long-range consequences on the variety and quality of the journalistic output. The study furthermore revealed that TV channels utilize program promotion at any time of the day.

• Research in Community and Public Health Nursing
• /
• v.18 no.1
• /
• pp.165-176
• /
• 2007

Purpose: The purpose of this study was to investigate the needs of home care nursing services in relation to the patients in hospital. Method: Subjects were 129 patients who admitted hospital and were selected through convenience sampling. Data were collected using the Home Health Care Need Assessment Questionnaire constructed by the Korea Health Industry Development Institute. Data were analyzed using SAS 8.12 program by applying percentage. Results: 1. According to the diagnosis of the subjects, the majority had cancer (25.0%), followed by musculoskeletal disease (15,6%), neuro/cerebral vascular disease (14.1%), digestive (10.9%) and respiratory disease (10.9%). 2. With regard to fundamental nursing service, subjects wanted to receive home care services for the following reasons: Problem identification and diagnosis (77.5%), vital sign check (49.6%); and intake and output measure (20.9%). 3. With regard to clinical laboratory tests, 62.8% wanted to receive blood tests, and followed by urine tests 26.4%, and wound drainage 26.4%. 4. With regard to medication and treatment service, 40.3% of the subjects wanted to receive intravenous fluid therapy, 26.4% intravenous antibiotics, and 26.4% the monitoring of fluid therapy. 5. With regard to therapeutic nursing service, 33.3% wanted to receive wound care, 26.4% ROM exercise, and 27.9% foley catheter change and care. 6. With regard to educational needs, 42.6% wanted education on infection monitoring, 41.4% on medication, and 34.9% on diet. 7. With regard to counseling needs, 65.9% wanted to receive telephone counseling about patient condition, 52.7% counseling about re-admission and 51.9% direct counseling about patient condition. In the group of injury and toxicity, and cardiovascular/circulatory diseases, 100% wanted telephone and direct counseling about the patient condition. Conclusion: Therefore, in order to improve the quality of hospital based home health care services, various factors that affect to the need of home health care should be analyzed and specified nursing care should be looked into.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.316-329
• /
• 2008

Recently the increased attention pays on the processing of multiple, relatively low quantity, high value-added products resulted in adoption of batch process in the chemical process industry such as pharmaceuticals, polymers, bio-chemicals and foods. As there are more possibilities of the improvement of operations in batch process than continuous processes, a lot of effort has been made to enhance the productivity and operability of batch processes. But the chemical process industry faces a range of uncertainties factors such as demands for products, prices of product, lead time for the supply of raw materials and in the production, and the distribution of product. And global competition has made it imperative for the process industries to manage their supply chains optimally. Supply chain management aims to integrate plants with their supplier and customers so that they can be managed as a single entity and coordinate all input/output flows (of materials, information) so that products are produced and distributed in the right quantities, to the right locations, and at the right time.The objective of this study is to solve the purchase, distribution, production planning and scheduling problem, which minimizes the total costs of production, inventory, and transportation under uncertainty. And development of SCM model in chemical industry including batch mode operations. Through that, the enterprise can respond to uncertainty. Also integrated process optimal planning and scheduling model for manufacturing supply chain. The result shows that, the advantage of supply chain integration are quality matters seen by customers and suppliers, order schedules, flexibility, cost reduction, and increase in sales and profits. Also, an integration of supply chain (production and distribution system) generates significant savings by trading off the costs associated with the whole, rather than minimizing supply chain costs separately.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.41-53
• /
• 2015

In meteorological field, many researchers have tried to develop micro scale weather analysis modules for providing real-time weather information service in the metropolitan area. This effort enables us to cope with various economic and social harms coming from serious change in the micro meteorology of a metropolitan area due to rapid urbanization such as quantitative expansions in its urban activity, growth of population, and building concentration. The accuracy of the micro scale weather analysis modules (MSWAM) directly related to usefulness and quality of the real-time weather information service in the metropolitan area. This paper design a evaluation system along with verification tools that sufficiently accommodate spatio-temporal characteristics of the outputs of the MSWAM. For this we proposes a test for the equality of mean vectors of the output series of the MSWAM and corresponding observed time series by using a spectral analysis technique. As a byproduct, a time series cluster analysis method, using a function of the test statistic as the distance measure, is developed. A real data application is given to demonstrate the utility of the method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.648-654
• /
• 2004

The Mass Flow Controller(MFC) has become crucial in semiconductor manufacturing equipments. It is an important element because the quality and the yield of a semiconductor process are decided by the accurate flow control of gas. Therefore, the demand for implementing the high speed and the highly accurate control of MFCs has been increasing. It is hard to find an article of the control algorithm applied to MFCs. But, it is known that commercially available MFCs adopt PID control algorithms. Particularly, when the system detects the flow by way of heat transfer, the MFC control problem includes the slow response and the nonlinearity. In this paper, MFC control algorithm with a superior performance to the conventional PID algorithm is discussed and the superiority is demonstrated through the experiment. A fuzzy controller was utilized in order to compensate the nonlinearity and the slow response, and the performance is compared with that of an MFC currently available in the market. The control system, in this paper, consists of a personal computer, the data acquisition board and the control algorithm carried out by LabWindows/CVI program on the PC. In addition, a method of estimating the actual flow from the sensor output with the slow response is presented. In conclusion, according to the result of the experiment, the proposed algorithm shows better accuracy and is faster than the conventional controller.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.383-387
• /
• 2014

In this paper, for a new detection system development with the better accurate dose evaluation and beam distribution imaging using the small field irradiation of linear accelerator, the compound semiconductor based detection sensors were fabricated and the performance evaluation was investigated. The special particle-in-binder sedimentation was used for a large area film sensor fabrication. The detection properties for high energy x-rays were investigated from a dark current, an output current, a rising time, a falling time, and response delay measurement. The experimental results, the $TiO_2$ mixed $HgI_2$ sensor showed the best electrical characteristics than $PbI_2$, PbO, pure $HgI_2$. Linearity, repeatability, and accuracy tests from LINAC were tested, the $TiO_2$ mixed $HgI_2$ sensor showed the better performance than the commercially available dosimetry devices.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.84-89
• /
• 2003

In this paper, we real-time implemented to the TMS320C5416 the vocoder of variable bit rate applied the SOLA-B algorithm by Henja to the ITU-T G.729A vocoder of 8kbps transmission rate. This proposed method using the SOLA-B algorithm is that it is reduced the duration of the speech in encoding and is played at the speed of normal by extending the duration of the speech in decoding. At this time, we bandied that the interval of cross correlation function if skipped every 3 sample for decreasing the computational amount of SOLA-B algorithm. The real-time implemented vocoder of C.729A and SOLA-B algorithm is represented the complexity of maximum that is 10.2MIPS in encoder and 2.8MIPS in decoder of 8kbps transmission rate. Also, it is represented the complexity of maximum that is 18.5MIPS in encoder and 13.1MIPS in decoder of 6kbps, it is 18.5MIPS in encoder and 13.1MIPS in decoder of 4kbps. The used memory is about program ROM 9.7kwords, table ROM 4.5kwords, RAM 5.1 kwords. The waveform of output is showed by the result of C simulator and Bit Exact. Also, for evaluation of speech quality of the vocoder of real-time implemented variable bit rate, it is estimated the MOS score of 3.69 in 4kbps.