• Journal of Korean Clinical Nursing Research
• /
• v.18 no.1
• /
• pp.13-28
• /
• 2012

Purpose: This study was conducted to develop standards ensuring nursing process-based fluid intake/output and tube care, and to develop a performance measurement tool evaluating the level of care according to the standards, and finally to determine validity of the standards and the tool. Methods: The standards and the tool were reviewed by a panel of experts and refined based on the panel's suggestions. Validity of the standards and the tool were examined using a survey of 293 hospital nurses. Results: The mean validity scores of the performance measurement standards and the tool were 3.86 and 4.02, respectively, out of 5.00. So the performance measurement standards and the tool in this study were found to be acceptable in evaluating quality of nursing care for fluid intake/output and tubes. Conclusion: This result indicates that the performance measurement standards and the tool developed in this study are valid instruments to monitor and improve quality of nursing care for fluid intake/output and tube interventions, such as intravenous catheters, nasogastric tube and urinary catheters.

• Korean Journal of Materials Research
• /
• v.27 no.2
• /
• pp.107-112
• /
• 2017

The BCBJ (Back Contact and Back Junction) or back-lit solar cell design eliminates shading loss by placing the pn junction and metal electrode contacts all on one side that faces away from the sun. However, as the electron-hole generation sites now are located very far from the pn junction, loss by minority-carrier recombination can be a significant issue. Utilizing Medici, a 2-dimensional semiconductor device simulation tool, the interdependency between the substrate thickness and the minority-carrier recombination lifetime was studied in terms of how these factors affect the solar cell power output. Qualitatively speaking, the results indicate that a very high quality substrate with a long recombination lifetime is needed to maintain the maximum power generation. The quantitative value of the recombination lifetime of minority-carriers, i.e., electrons in p-type substrates, required in the BCBJ cell is about one order of magnitude longer than that in the front-lit cell, i.e., $5{\times}10^{-4}sec$ vs. $5{\times}10^{-5}sec$. Regardless of substrate thickness up to $150{\mu}m$, the power output in the BCBJ cell stays at nearly the maximum value of about $1.8{\times}10^{-2}W{\cdot}cm^{-2}$, or $18mW{\cdot}cm^{-2}$, as long as the recombination lifetime is $5{\times}10^{-4}s$ or longer. The output power, however, declines steeply to as low as $10mW{\cdot}cm^{-2}$ when the recombination lifetime becomes significantly shorter than $5{\times}10^{-4}sec$. Substrate thinning is found to be not as effective as in the front-lit case in stemming the decline in the output power. In view of these results, for BCBJ applications, the substrate needs to be only mono-crystalline Si of very high quality. This bars the use of poly-crystalline Si, which is gaining wider acceptance in standard front-lit solar cells.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.534-538
• /
• 2010

X-ray systems for medical treatment use noninvasive procedures. Being capable of locally inspecting the inside of the body, X-ray systems are routinely used for basic diagnosis. X-ray systems to be used for medical purposes were originally made with a gas filled tube inside an induction coil in the initial stages of development but with this approach it becomes difficult to take a satisfactory picture through thick body sections, non invasively. However continued development made it possible to take non-invasive pictures of breasts, blood vessels and other body parts through thick body sections. Recently, high-voltage X-ray generators of more compact size, increased generation efficiency, and sophisticated output control have become possible. All of these features are made possible by the use of a high-frequency output from an inverter and a fast switching semiconductor device. In this paper, we describe a new X-ray generator operating with a resonant inverter in order to reduce switching loss and high frequency noise. In addition, in order to identify the differences amongst types of rectification, we have compared output and the quality of X-ray pictures obtained with full-wave rectification and dual-voltage rectification methods.

• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.206-215
• /
• 2022

For a long time, traditional culture has been regarded as one of the sources of the inspiration, method and language of Chinese writing. In this article, we studied the medium- and long-term impact of a traditional Chinese culture seminar attended by college students on the output of creative writing. The seminar included traditional Chinese philosophy, history, literature, art, etc. It spanned three years (22 months) and held lectures lasting for approximately two hours once a week. The subjects of the prospective cohort study included 130 first-year college students who participated in the seminar and 130 controls. From September 2016 to June 2018, 72 lectures were held. We measured the creative writing output from the first lecture (September 2016) to December 2021 (64 months in total), including novels, essays, poems, and plays. Two indicators, the total number of words (TNW) and the quality of yield (QY), were evaluated by a 15-member panel. Although the TNW and QY of the participants and their controls were similar before the seminar, we found that the participants have higher TNW and QY than the controls after participating in the seminar. The difference in TNW became significant after month 51 (p<0.05), and the difference in QY became significant after month 46 (p<0.05). After these dates, the differences stabilized. In addition, text analysis indicates that by month 64, traditional cultural elements in the works of the participating group had a higher frequency (p<0.001). The research shows that the traditional culture seminar not only enhanced the yield of college students' creative writing but also improved the quality of their work. The traditional cultural elements enriched the works of the seminar participants.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.3
• /
• pp.471-498
• /
• 2009

The ability to judge a country's scientific standing is vital for the governments and businesses that must decide scientific priorities and funding. In this paper, we analyze the output and outcomes from research investment over the recent years, to measure the quality of scientific research on national scales and to set it in an international context. There are many ways to evaluate the quality of scientific research, but few have proved satisfactory. To measure the quantity and quality of science in different nations, we analyzed the numbers of published research papers and their citations. The number of citations per paper is a useful measure of the impact of a nation's research output. Essential at a were acquired from SCI database by Thomson Scientific, which indexes more than 8,000 journals, representing most significant materials in science and engineering. The purpose of this paper is to evaluate and compare the output and outcomes among nations in a variety of viewpoints and criteria. One of the implications in response to the result of analysis is that sustainable economic development in highly competitive world markets requires a direct engagement in the generation of knowledge. Even modest improvement in healthcare, clean water, sanitation, food, and transport need capabilities in engineering, technology, and medicine beyond many countries' reach. Nations exporting natural resources such as gold and oil can import technology and expertise, but only until these resources are exhausted. For them, sustainability should imply investment in alternative agricultural and technological capabilities through improvements in their skills base. A strong science base does not necessarily leat to wealth generation. However, strength in science has additional benefits for individual nations, and for the world as a whole.

• Journal of Information Technology Services
• /
• v.12 no.4
• /
• pp.255-265
• /
• 2013

This paper proposes a DEA-AR model for the efficiency evaluation of the iron ore brands in an integrated steel mill. The input factor is defined as unit cost of each brand based on CIF and two output factors are chosen as Fe and Al which are the important ingredients of iron ore. The relative importance between two output factors is determined by several experts using AHP model. The efficiency of each brand is determined using DEA and DEA-AR models. The negative correlation between the DEA-AR efficiency and the unit cost (CIF) is shown as significant whereas no significant correlation exist between the efficiency and the output factors. Also, the Kruskal Wallis rank sum test shows that there exist efficiency differences among the iron ore types whereas no difference is shown among the countries. The result could be utilized in selecting good brands of iron ores based on the DEA-AR efficiency in an integrated steel mill.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.173-174
• /
• 2016

This paper proposes a comparison of Voltage Oriented Control (VOC) and Direct Power Control (DPC) under command mode transition for PMSG Wind Turbines (WT). Based on a neutral point clamped three level back to back type Voltage Source Converter (VSC), proposed control scheme automatically control the generated output power to satisfy a grid requirement from the hierarchical wind farm controller. Automatic command mode transition based on the dc-link voltage error provides a command mode changing between grid command and MPPT mode. It is confirmed through PLECS simulations in Matlab. Simulation result shows that proposed control scheme of VOC and DPC achieves a much shorter transient time of generated output power than the conventional control scheme of MPPT with optimal torque control and VOC under a step response. The proposed control scheme makes it possible to provide a good dynamic performance for PMSG wind turbines in order to generate a high quality output power.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.439-439
• /
• 2009

Nowadays, source of MEMS, USN, Hybrid parts pay attention to energy harvesting. On this paper, energy harvesting was studied using piezoelectric effect. And, piezoelectric generator was designed and fabricated. Generators were designed by FEM simulation program and generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Output AC power was rectified to DC power by full bridge circuit and converted to regular voltage power by DC-DC converter. The final output power was charged to Ni-Cd battery. Using fabricated generators, output voltages dependant on thickness of ceramic, displacement of vibration, frequency of vibration were measured.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.244-249
• /
• 1996

Multipass Ti:sapphire amplifier for the light source of DIAL was developed with an angular-multi-plexing, and the characteristics of output energy and spectra were investigated. As the characteristics of two-stage multipass amplifier, the maximum output energy was 22 mJ and the amplification gain was 20 dB on the wavelength of 790 nm. At that condition, output efficiency of the pumping energy was 18 percent. We obtained $0.15cm^{-1}$ (9.4 pm) as a spectral linewidth in the tuning range of 705~845 nm.

• Transactions of Materials Processing
• /
• v.20 no.1
• /
• pp.73-78
• /
• 2011

The flashing reduces the part quality and the productivity of the molding process. We developed a contact pressure sensor to detect the flashing immediately. The performance of the sensor was analyzed in a simple 2D simulation. The sensor was applied to an automotive bumper mold with cavity pressure sensors. It showed sensitive output signal for the mold response by the cavity pressure change. It was confirmed that the flashing at the gate area occurred in the filling stage by the pressure increase due to growth of the melt flow length. The sensor output was correlated with the cavity pressure sensor output.