• Journal of Broadcast Engineering
• /
• v.2 no.1
• /
• pp.8-15
• /
• 1997

In this paper, a real-time operating Motion Picture Experts Group-1 (MPEG-1) audio encoder system is implemented using a TMS320C31 Digital Signal Processor (DSP) chip. The basic operation of the MPEG-1 audio encoder algorithm based on audio layer-2 and psychoacoustic model-1 is first verified by C-language. It is then realized using the Texas Instruments (Tl) assembly in order to reduce the overall execution time. Finally, the actual BSP circuit board for the encoder system is designed and implemented. In the system, the side-modules such as the analog-to-digital converter (ADC) control, the input/output (I/O) control, the bit-stream transmission from the DSP board to the PC and so on, are utilized with a field programmable gate array (FPGA) using very high speed hardware description language (VHDL) codes. The complete encoder system is able to process the stereo audio signal in real-time at the sampling frequency 48 kHz, and produces the encoded bit-stream with the bit-rate 192 kbps. The real-time operation capability of the encoder system and the good quality of the decoded sound are also confirmed using various types of actual stereo audio signals.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.319-327
• /
• 2013

The objective of this research was to develop a relational database management system(RDBMS) to collect, manage and analyze data on agricultural non-point source(NPS) pollution. The system consists of the relational database for agricultural NPS data and data process modules. The data process modules were composed of four sub-modules for data input, management, analysis, and output. The data collected from the watershed of the upper Cheongmi stream and Geunsam-Ri were used in this study. The database was constructed using Apache Derby with meteorological, hydrological, water quality, and soil characteristics. Agricultural NPS-Data Management System(ANPS-DMS) was developed using Oracle Java. The system developed in this study can deal with a variety of agricultural NPS data and is expected to provide an appropriate data management tool for agricultural NPS studies.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.109-113
• /
• 2007

The COMS provides the LRIT/HRIT services to users. The COMS LRIT/HRIT broadcast service should satisfy the 15 minutes timeliness requirement. The requirement is important and critical enough to impact overall performance of the LHGS. HRIT image data is acquired from INRSM output receiving but LRIT image data is generated by sub-sampling HRIT image data in the LHGS. Specially, since LRIT is acquired from sub-sampled HRIT image data, LRIT processing spent more time. Besides, some of data loss for LRIT occurs since LRIT is compressed by lossy JPEG. Therefore, algorithm with the fastest processing speed and simplicity to be implemented should be selected to satisfy the requirement. Investigated sub-sampling algorithm for the LHGS were nearest neighbour algorithm, bilinear algorithm and bicubic algorithm. Nearest neighbour algorithm is selected for COMS LHGS considering the speed, simplicity and anti-aliasing corresponding to the guideline of user (KMA: Korea Meteorological Administration) to maintain the most cloud itself information in a view of meteorology. But the nearest neighbour algorithm is known as the worst performance. Therefore, it is studied in this paper that the selection of nearest neighbour algorithm for the LHGS is reasonable. First of all, characteristic of 3 sub-sampling algorithms is studied and compared. Then, several sub-sampling algorithm were applied to MTSAT-1R image data corresponding to COMS HRIT. Also, resized image was acquired from sub-sampled image with the identical sub-sampling algorithms applied to sub-sampling from HRIT to LRIT. And the difference between original image and resized image is compared. Besides, PSNR and MSE are calculated for each algorithm. This paper shows that it is appropriate to select nearest neighbour algorithm for COMS LHGS since sub-sampled image by nearest neighbour algorithm is little difference with that of other algorithms in quality performance from PSNR.

• Journal of Korean Society of Rural Planning
• /
• v.13 no.1 s.34
• /
• pp.73-84
• /
• 2007

The first theme of this study is to preserve and manage rural multi-functionality resource Information. This study is to suggest the method that can irradiate rural multi-functionality resource Information efficiently and constructively. GIS uses PDA and Tablet PC as an investigation tool and verifies the outcome of the development in the investigation system. This study enhanced the mobility function of PDA by installing recording system and camera to the PDA. Also, Using GPS has been ensured scientific precision and realism to the investigation. Direct input on spot can save time, cost and minimize human error by simplifying the investigation process. Database is composed of characters like scale, form, location, distance, resident's opinion and image of 37 resources. The survey system was applied in 170 villages and got a total of 12,270 resources data. Management system should be easy to input and output the surveyed information and to get reports in any kind of form ( i.e. final result can be produced as a map). By utilizing of the Rural Resource information system, the study made a simulation to compare the target areas before and after. Also, digitalized investigation system, minimized re-input and reprocessing of data and enabled to simplify and standardize the process than memorandum investigation. Data collected through digital system could offer people useful information by Web-GIS. It was need to specify practical way in decision-making and a way to measure the value of resources to align with the regional plan. Also, need to keep on developing statistical data and application program that can connect us to present the best solution to support regional planning. Therefore, quality of data is very important. Finally, it is very important to develop various programs to analyze space md rural resource by monitoring rural environment.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.337-344
• /
• 2016

The purpose of this study was to evaluate the radiolucency for the phantom output to the 3D printing technology. The 3D printing technology was applied for FDM (fused deposition modeling) method and was used the material of ABS (acrylonitrile butadiene styrene) resin. The phantom was designed in cylindrical uniformity. An image uniformity was measured by a cross-sectional images of the 3D printed phantom obtained from the CT equipment. The evaluation of radiolucency was measured exposure dose by the inserted ion-chamber from the 3D printed phantom. As a results, the average of uniformity in the cross-sectional CT image was 2.70 HU and the correlation of radiolucency between PMMA CT phantom and 3D printed ABS phantom is found to have a high correlation to 0.976. In the future, this results will be expected to be used as the basis for the phantom production of the radiation quality control by used 3D printing technology.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.209-213
• /
• 1999

In the society of the 21\ulcorner century under multiphase media conditions, the rapidly glowing electronic media will replace the conventional paper media in a variety of areas. However, if human being still has an affinity for paper media and an instinct for hardcopy from electronic-based text or image, the new market will be created for the paper industry. To what extent the consumer choses paper media for output will depend upon the availability of functions of paper media appealing to human senses; i.e., "sensory functions of paper". As a whole, on-demand type personal as well as business communications will increase in the next century and this trend will lead certainly to a rapidly expanding "contents hardcopy market". The technological progress of the paper industry in the 21\ulcorner century depends upon the market needs for higher products quality and higher efficiency of manufacturing process as well as an endeavour to overcome constraints from forest resource, energy, and environmental issues. Under the conditions with above constraints, the paper media will be polarized into two categories; (1)paper for higher image reproduction capability for original image or text and (2)paper for lower reproduction but with higher appeals for human senses. To cope with these trends, psycho-physical analysis and a sensory engineering approach for developing new paper media is vitally required. Also newly emerged roles of paper physics in the multimedia age is pointed out associated with sensory functions of paper that are not well-understood so far.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.477-482
• /
• 2017

When using the FDM to create a 3D object, a thermoplastic filament is heated to its melting point and then extruded layer by layer. Although the FDM printing process has many advantages, its accuracy, and surface finish are not satisfactory. In recent years, much research has been devoted to improving the accuracy of the FDM printing process. The temperature difference between the nozzle and the interior of the chamber of a 3D printer is one of the important parameters affecting the printing process. In this study, we propose a methodology to reduce this temperature difference through design improvement. In addition, we elucidate how this design improvement affects product quality. The FDM printing process is conventionally carried out in a closed chamber. However, in this study, an open heating system is used to reduce the temperature. The FDM printing processes were simulated using FEM analysis.

• Journal of Korea Water Resources Association
• /
• v.47 no.3
• /
• pp.247-256
• /
• 2014

A company, which is chicken butcherying-plant, was scheduled to increase up to twice output. We researched the way to increase up to twice the processing efficiency at the target biological treatment tank of A company. We performed for this study to obtain the reason why organic matter and nitrogen removal efficiency is increased when MLSS concentration is increased. It's performed at the target of pressure flotation water on SBR system. We performed the research which MLSS was 12,700 mg/L for 30hours (in aerobic condition for 25 hours and in anoxic condition for 5 hours). As a result, the nitrification was happened completely in aerobic condition within 25 hours. Denitrification efficiency was also over 90% when C/N ratio was over 3:1. After the experiment, we changed the concentration of MLSS 5,600 to 12,700 mg/L. In condition MLSS was about 11,000 mg/L and HRT were 30 hours meet the Effluent quality standard.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.152-163
• /
• 2020

The present study introduces a procedure to prepare and manage a high-resolution rainfall and soil moisture (SM) database in the LAMP prediction system, especially for landslide researchers. The procedure also includes converting the data into spatial resolution suitable for their interest regions following proper map projection methods. The LAMP model precipitation and SM data are quantitatively and qualitatively evaluated to identify the model prediction characteristics using the ERA5 reanalysis precipitation and observed 10m depth SM data. A detailed process of converting LAMP Weather Research and Forecasting (WRF) output data for 10m horizontal resolution is described in a step-wise manner, providing technical convenience for users to easily convert NetCDF data from the WRF model into TIF data in ArcGIS. The converted data can be viewed and downloaded via the LAMP website (http://df.ncam.kr/lamp/index.do) of the National Center for AgroMeteorology. The constructed database will contribute to monitoring and prediction of landslide risk prior to landslide response steps and should be data quality controlled by more observation data.

• Archives of design research
• /
• v.15 no.1
• /
• pp.389-398
• /
• 2002

With the awareness that the world market of animation industry is large enough to be concerned as our next generation industry and worthy enough to invest our resources, many animated films have been made and are still being made in these days. These animated films are no more a OEM based production that Korean animation industry have depended on for a long time. This is very positive situation we make our own animated films from plaining to final output. Nevertheless one thing we should aware here is these animations are behind in quality and contents compared to those in advanced country. There should be many reasons in this matter, but the most fundmental problem that the Korean animation industry is facing is lack of its central force like Walt Disney in United States. This study will research the problems of our animation production system and show alternative plans by comparing and analyzing those in advanced country.