• Journal of Korean Society for Quality Management
• /
• v.29 no.4
• /
• pp.82-91
• /
• 2001

Taguchi robust design is widely used to quality improve methods. Especially, interest of dynamic characteristics parameter design is getting grow. In this paper, we have a comparative analyzed three Signal-to-Noise Ratios which are used in American Supplier Institute(ASI), MINITAB and Taguchi series published by Japanese Standard Institute with numerical examples.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.11a
• /
• pp.300-310
• /
• 2005

Mahalanobis Taguchi System (MTS) is developed by Genishi Taguchi as a part of his quality engineering methodology. The basic idea of Taguchi's quality engineering is looking for the way of effectiveness of analyzing multivariate system. In the MTS, with the standardized variables of healthy normal data, Mahalanobis Distance(MD) calculated and that can be discriminate between normal and abnormal objects. If this discrimination process is successful, next step is optimization which is try to reduce number of attributes by neglecting less effective attributes to MD. Orthogonal Array (OA) and Signal to Noise ratio (S/N) are used to evaluate the amount contribution of each attribute to the MD. Wisconsin Breast Cancer study, from machining learning repository at University of California at Irvine, used for examining the discriminant ability of MTS.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.721-728
• /
• 2007

The prediction of quality characteristics during the design phase of a construction project was fragmented, because no particular method exists. One of the most important key responses is the total displacements (horizontal and vertical). A brainstorming session produces the quality parameters i.e. the control factors which here are identified as: the steel joint, the pile's length, the excavation depth and angle, the distance between the piles, the anchor stretch and length to name just some of the most engaging in the design. The purpose of this study is to optimise these parameters to minimize the total displacements following a methodology based on Taguchi method. For this reason, a 2-level, L₈ orthogonal array has been employed to organize the experimentation. Data is obtained from a real-life excavation project designed on the Plaxis v.8 CAE package. Taguchi analysis is performed in the statistical package Minitab.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.3
• /
• pp.27-36
• /
• 2000

The Robust Design method uses a mathematical tool called orthogonal arrays to study a large number of decision variables with a small number of experiments. It also uses a new measure of quality, called signal-to-noise (S/N) ratio, to predict the quality from the customer's perspective. Thus, the most economical product and process design from both manufacturing and customers' viewpoints can be accomplished at the smallest, affordable development cost. Many companies, big and small, high-tech and low-tech, have found the Robust Design method valuable in making high-quality products available to customers at a low competitive price while still maintaining an acceptable profit margin. A study to analyze and solve problems of a biochemical process experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.1
• /
• pp.117-125
• /
• 2001

Polyacetal resin is usually used to make molds, but it is difficult to achieve dimension accuracy during molding. Therefore it is usually necessary to cut the polyacetal resin after a molding process. Polyacetal resin is easily machining by standard machine tool. Acetal is also a thermal stable material which can be totted without coolant Another concern about the use of polyacetal resin is that it absorbs water easily, which also results in problems with dimension accuracy Therefore, in this study, the cutting resistance of water-absorbed polyacetal resin and its surface roughness after cutting in order to achieve the highest degree of accuracy in the cutting of polyacetal resin were investigated. Also, The Robust Design method uses a mathematical tool called orthogonal arrays to study a large number of decision variables with a small number of experiments. It also uses a new measure of quality, called signal-to-noise (S/N) ratio, to predict the quality from the customer's perspective. Thus, we have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.373-378
• /
• 2001

In order to analyze the problems and improvement methods in the quality management of domestic apartment construction projects, this study derived the four barrier factors through relevant literature survey and interviews with construction practitioners. Among these four factors, which are 1) policies and regulations, 2) technologies, 3) human and organization, and 4) other miscellaneous aspects, the human and organization factor is the main focus of this survey and it was decomposed into perception, management system, education, and system on quality management according to the Taguchi's S/N theory to survey existing problems and suggest improvement methods for them. The survey on the quality perception showed that all the members need to cooperate actively, and CEO and chief construction managers should recognize the quality as the highest priority and act by themselves accordingly. The survey on the quality management showed that they need to reform their business process to reduce redundant tasks and miscommunications among participants. Quality education should be provided in a way that people at different management level can be educated differently with close relation to their practices. Quality systems should help corrective actions against quality problems at construction fields. Also with clear quality management implantation polices and objectives, the quality system should be established in order to support better communication among project stakeholders.

• Journal of Korean Society for Quality Management
• /
• v.25 no.1
• /
• pp.1-16
• /
• 1997

In this paper, we illustrate how to design screening inspections for minimizing a total quality costs in a multi-stage manufacturing systems. The total quality cost model consists of inspection costs, internal failure costs, external failure costs, and Taguchi's loss function. Although, the use of automatic test equipment such as machnie vision and CMM has greatly increased inspection speed and accuracy, screeing(100% inspection) could be considered only as a short-term method to remove nonconforming items from a population, not for a long-term quality improvement. However, screeing should be used for certain situations such as before costly operations and after unsatisfied operations. This paper ends with an example that demonstrates the usefulness of the model.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.4
• /
• pp.113-124
• /
• 2000

First, in order to improve selecting method of quality characteristic level desired by customers, S/N(Signal-to-Noise) ratio of Taguchi in larger-the-better characteristics was applied. Second, the Matrix classification standard of ACE(Attribute Categorization Evaluation) is presented using KANO model on difference analysis of importance and satisfaction through questionnaire from customers. This is for reflecting the diverse EC which customers want in EC quality sufficiently. Also, establishing sales point will be helpful in business strategy through presenting types that are able to decide planning quality. Third, the important measure of EC about correlation among quality characteristics and a new weight of EC are calculated depending on importance of EC and the weight of customer attribute and materials of relationship matrix through correlation matrix analysis.