• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.599-608
• /
• 2017

Cracks on the asphalt road surface can affect the speed of the car, the consumption of fuel, the ride quality of the road, and the durability of the road surface. Such cracks in roads can lead to very dangerous consequences for long periods of time. To prevent such risks, it is necessary to identify cracks and take appropriate action. It takes too much time and money to do it. Also, it is difficult to use expensive laser equipment vehicles for initial cost and equipment operation. In this paper, we propose an effective detection method of road surface defect using ROI (Region of Interest) setting and cany edge detection method using UAV image. The results of this study can be presented as efficient method for road surface flaw detection and maintenance using UAV. In addition, it can be used to detect cracks such as various buildings and civil engineering structures such as buildings, outer walls, large-scale storage tanks other than roads, and cost reduction effect can be expected.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.453-460
• /
• 2017

High voltage power transmission lines have been to keep the proper dip for maintenance. Powerline dips at a random point are conventionally measured by the direct or indirect observation but it is not only unsafe but labor-intensive. Therefore in this study we applied the photogrammetric technique to remotely measure the powerline dips. Since it is not easy to extract conjugate points from linear powerlines, we exploited the epipolar lines acrossing the powerlines for 3D mapping of the powerlines and dip measurements. The vertical mapping accuracy estimated at two field-surveyed power line points was 15~16cm that are within 5% of deflection at the points and less than 3% of the powerline dip.

• Korean Journal of Biological Psychiatry
• /
• v.6 no.2
• /
• pp.246-252
• /
• 1999

Objectives : Daytime drowsiness or sedation and changes in night sleep are commonly seen in patients treated with clozapine. There is, however, very limited information on their degree and nature during the course of treatment. The purpose of this study was to understand the sleep patterns in chronic schizophrenic patients with clozapine treatment over a period of 24 weeks. Method : The sleep pattern was evaluated using a set of 5-point scale questionnaire, to record subjective impressions of the night sleep induction, maintenance and quality, and daytime drowsiness and fatigue. In addition, unusual experiences associated with night sleep were recorded. The sleep questionnaire was repeatedly administered at baseline and at 1, 2, 4, 8, 12 and 24 weeks of drug treatment. At present, data on 12 patients has been collected. Results : All the components of night sleep were significantly improved in the 1st through the 12th week after treatment with clozapine. Daytime drowsiness was significantly higher in the 1st to the 2nd week after the treatment and fatigue was also significantly higher in the 1st to the 4th week after the treatment. Eight patients experienced noticeable increases in salivation during night sleep, and of these, one also reported frequent nocturnal urination and even enuresis. However, all these adverse factors did not affect the major sleep patterns. Conclusions : These findings suggest that the beneficial effects of clozapine on night sleep might last much longer than the undesirable effect of daytime drowsiness and fatigue. In other words, tolerance of the hypnotic action of clozapine might develop late and tolerance of the daytime drowsiness and fatigue might be evident earlier.

• Journal of Oriental Neuropsychiatry
• /
• v.12 no.2
• /
• pp.135-146
• /
• 2001

Insomnia is one of the most common symtoms of Neuropsychiatry patients. These are many approaches to treat insomnia, but it is difficult to be resolved completely. Acupuncture and Auricular acupuncture have been used for relief insomnia. But it is not sufficient to compare the effect of Acupuncture treatment and Auricular acupuncture treatment. Thus we investigate the effect of Acupuncture treatment group and Auricular acupuncture treatment group. A clinical analysis was carried out for 40 patients who was treated insomnia with Acupuncture(20 patients) and Auricular acupuncture(20 patients) in Seoul Dong-Seo Oriental Hospital. 1. Total duration of sleeping time showed $1.55{\pm}1.1574$ hours increased in Acupuncture group and $0.925{\pm}1.184$ hours increased in Aricular acupuncture group. especially Acupuncture were much more effective method than Aricular acupuncture. P-value was 0.033 (P <0.05) 2. Delaying time before the onset of sleep showed $0.7375{\pm}0.8940$ hours decreased in Acupuncture group and $0.7969{\pm}1.3298$ hours decreased in Auricular acupuncture group. (P <0.05) 3. The wake times showed $0.9167{\pm}1.7299$ times decreased in Acupuncture group and $1.2308{\pm}1.1658$ times decreased in Auricular acupuncture group in sleep maintenance insomnia. (P <0.05) 4. Change in quality of sleep showed Excellent 30%, Good 50%, Fair 15%, Poor 5% in Acupuncture group and Excellent 20%, Good 45%, Fair 30%, Poor 5% in Aruricular acupuncture group.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.481-488
• /
• 2011

Various development activities have lead to the destruction of the ecosystem such as natural wetlands. In order to protect these natural wetlands, the Ministry of Environment (MOE) in Korea enacted the Wetland Conservation Act in 1999 and designated protected areas for wetland conservation. The MOE adapted the use of Best Management Practices (BMP) such as retention ponds and constructed wetlands to treat the polluted water before entering the water system. One of these projects was a free-water surface flow (FWS) constructed wetland built as a secondary treatment unit for piggery wastewater effluent coming from a livestock wastewater treatment facility. Water quality monitoring for the constructed wetland was conducted during rainfall events. The results showed that the average removal efficiencies of TSS, BOD, TN, TP were 86, 60, 45, 70%, respectively. It was observed that the removal efficiency of particulate matter and phosphorus was high compared to nitrogen. Therefore, a longer hydraulic retention time was needed in order to improve the treatment efficiency of nitrogen. The results of this study can contribute to the wetland design, operation and maintenance of constructed wetlands.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3988-3997
• /
• 2010

Shotcrete was a mortar or concrete that is pneumatically projected at high velocity onto a subject. It has been applied for tunneling, underground big-spaces, slope stabilization. Shotcrete is increasing use in structure repair. The dry-mix shotcrete require a smaller equipment, easy maintenance, possible of very-earlystrength materials than wet-mix shotcrete, which make this process attractive and economic for structural repairs. It is common practice core compressive strength to the dry-mix shotcrete quality control. This test is very difficult estimating eraly-strength of Very-Early-Strength Dry-Mix Shotcrete. The purpose of this research was to analyze the correlation of test results among cube test, core test, pullout test and maturity. The correlationship analysis of test results among cube test, core test, pullout test and maturity showed more than 90%.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.121-131
• /
• 2006

Since "Act on Private Participation in Infrastructure" were changed in January 2005, BTL(Build-Transfer-Lease) projects of Private Participation In Infrastructure was introduced in the domestic construction market for the purpose of providing public facilities with the public. Selecting the most qualified Promoter should be considered discreetly in BTL projects because BTL projects is for projects with approximately thirty year project life cycle, plan, construction, operating, maintenance and obviously the success of the project totally depends on the capability and role of concessionaire. However, score for cost is likely to influence designating concessionaire to take the project. Accordingly, low bid contract with too much competition could decrease the quality of the construction plan and operating plan. Thus, this study did preliminary research and documents on problems of evaluation criteria for designating concessionaire in BTL projects, and proposed improvement program by doing questionnaire over specialists of each field.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.379-382
• /
• 2003

Construction concrete needs to maintain suitable environment which contains temperature and humidity etc. Then concrete shows own strength. The environment is not regular and contains many variables. Especially the climate element occupies many parts of variables. We have the climate environment which goes down to $-4^{\circ}C$. The factor that obstruct to construction is the failure at a construction progress. But it must be processed to be scheduled. Therefore we have to do the special care for factor of climate that obstruct to construction. We must make assurance doubly sure at the quality of concrete. We need maintenance of temperature and humidity for the hardening until the requirement period after a concrete pured in. We must do the care of curing sufficiently not to take the influence of injurious activity. This causes strength of concrete. Specific method of curing is according to each situation which is environment element. We wish to analyze curing course in construction of concrete at the paper. Also we wish to predict the problem as to consider curing and suggest the improvement plan through the paper.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.164-170
• /
• 2003

This paper is to evaluate the informational direction, current situations and ERP establishment concerning constructing industry, to present the right directions, implemented cases for implementing constructional ERP, also to suggest the effect, influence, problems and shootings in constructional ERP arena. The constructing industries in korea are facing great turning point because of the huge corruptions currently happened and forcing to open the market in 1997. Attempting to establish Computer Integrated construction system (ERP) by breaking down constructing cost, improving quality, operating rapid and effective construction to enhance productivity, it is hard to achieve the goal with only inter-contractor's establishment. Constructing industries are integrated ones, consisted of many organizations for instance ordering agencies, contractors, subcontractors, material vendors, etc. and use various information formats such as texts, graphics, drawings. I dare suggest that implementation of constructional CALS including EDI/EC, GIS is tile only solution to control the information systematically generated in whole stages from planing, designing, constructing through maintenance, and to supply or switch the information.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.430-433
• /
• 2003

Cost, schedule, quality are the essential parts of success of every construction project. It is especially true in high-rise building construction. Among the construction components in high-rise building construction, curtain walls are very important elements for the project success because they take large portion of cost and schedule. However, curtain wall construction process are very complicated, where many entities including designers, suppliers, contractors and even maintenance contractors are involved. Therefore, control and management of their relationships and production process are critical. It is suggested that this can be solved by the concept of Supply Chain Management which is supported by the automated information technology with Radio Frequency Identification. Such concept is defined as 'Automated Life-Cycle Management System Based On SCM' and this study suggests rode map to establish the system.