• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.157-167
• /
• 2010

This study was conducted to investigate the quality characteristics of the natural dishwashing liquid added with the mixture extracts of Curcuma Longa L. (CL), Morus alba (MA) and Ecklonia cava (EC) at various concentrations. The pH and lightness of the natural dishwashing liquid were reduced by adding the mixture extracts, while the turbidity was increased. The natural dish washing liquid added with mixture extracts was shown to display strong antimicrobial activities against L. monocytogenes compared to that of control. Also, it revealed that antioxidant activity was increased depending on concentrations. However, natural dishwashing liquid added with mixture extracts showed the low detergency efficiency. In sensory evaluation, the natural dishwashing liquid containing CL 0.5%, MA 0.25% and EC 0.25% was preferred than the control and it showed negative result in skin patch test. These results suggest that the addition of CL 0.5%, MA 0.25% and EC 0.25% positively improved the qualities characteristics in the natural dish washing liquid.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.480-488
• /
• 2000

Cabbage is the most important vegetables in korea. The cabbage production was based on arduous human labor. A comprehensive research for substituting the human work by machines has been performed at present. In general, cabbage is cultivated on hillside in korea. The harvested cabbage in a field and carrying it to a vehicle for transportation are very laborious work. Hand labor in cabbage transportation to the market damages the quality of cabbage and is also a cause to increase the cost of cabbage production. This study was to design and evaluate a prototype cabbage loader for deserving efficient and safe transportation of cabbage. The developed cabbage loader was a semi-tracked vehicle operated by a hydraulic system, allowing the safe transporting and the loading of cabbage in a steep field. The maximum loading capacity of the loader was 1.0 ton. By using safety devices attached to the loader, the static slopes were 34.0% and 37.4% for the left and the rear roll-over, respectively. The maximum field speed was about 6km/hr with two cabbage pallets of 750kg at a 25% inclined field. The field capacity was about 35 pallets/hr in case of picking up, carrying and unloading two cabbage pallets. The field efficiency of the loader was analyzed to be more than 8 times in comparison of the conventional human labor. The developed loader would be applied for loading and carrying the other vegetables due to the similarity of operations. The study suggested a standard approach to the design of field machines operated in a steep field.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2016

Purpose: Mee (Madhuca longifolia) is an economically important tree growing throughout Sri Lanka. Its importance is mainly attributed to its oil with high nutritional and medicinal values. However, an inefficient extraction method limits its use. This study revealed the possibility of extracting oil from mee seeds by using a screw-type oil expeller. Methods: A popular screw-type oil expeller was used in the experiment. Extract bar clearance and speeds of the main spiral shaft were altered to increase the oil expelling efficiency of the machine. The quality of refined oil at the optimum oil yield was determined by measuring the refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity. Results: An optimum yield of 35% oil was obtained when the machine capacity was 30 kg/h and energy consumption was 0.13 kWh/kg. This optimum machine condition was observed at an extract bar clearance of 0.5 mm and a main spiral shaft speed of 90 rpm. The refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity of the oil were 1.4, 203, 59, 3.5%, 0.2%, and 0.907 g/cm3 respectively. Color of the mee oil was closer to yellow, which is revealed by the lightness value (L) of 24.93 and positive value (b) of 11.81. Conclusion: The screw-type oil expeller can be used for economically extracting mee oil on a commercial scale.

• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.593-605
• /
• 2018

The present study was undertaken to assess the efficacy of sapota powder (SP) as natural preservatives and its better utilization in food processing with the incorporation of various levels of SP (2, 4, and 6%) by replacing lean meat. Based on the sensory attributes, pork patties with 4% incorporation of SP was found optimum and selected for further storage studies with control under aerobic and modified atmosphere packaging at refrigeration temperature ($4{\pm}1^{\circ}C$) for 42 days for assessing its antioxidant and antimicrobial efficiency. During entire storage period, indicators of lipid oxidative parameters such as thiobarbituric acid reactive substances (TBARS), free fatty acids (FFA) and peroxide value (PV) followed an increasing trend for control as well as treated products; however, treated product showed a significantly (p<0.05) lower value than control. A significantly lower (p<0.05) microbial count in treated patties than control was noted during entire storage. The sensory attributes are better retained in treated product as compared to control and even on $42^{nd}$ day, overall acceptability of treated patties was found to fall in moderately acceptable category (5.95 in aerobic packets and 5.91 in modified atmosphere packets). Therefore SP has potential to enhance antioxidant and antimicrobial properties of pork patties during storage.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.3
• /
• pp.369-380
• /
• 2008

The government has promoted the local fishing port construction project since 1972 for conquest of the crisis of the fishing village by withering of a fishery, the improvement in fishermen's living environment and quality of life, and promotion of fisheries. In order to estimate the local fishing port construction project objective and synthetically, and to grope for the method proposal of system establishment of the project, the monitoring survey was carried out. The monitoring survey was classified into the program and the performance monitoring. The program monitoring was carried out in order to investigate the project fit for the inhabitants of a fishing village. The performance monitoring was carried out in order to investigate the development latent powers, fishery latent powers, tourism latent powers of a fishing village, rural settlement conditions, etc. using various statistical materials. Since investigating the measured value before executing a policy was not completed, the project effect was compared with the measured value of other areas. According to the local fishing port construction project, the development latent powers, fishery latent powers, and tourism latent powers of the fishing village where the project was undertaken improved greatly, and income of the fishing village increased greatly. As a result of comparing project fit in order to evaluate the project, the project fit of the local fishing port construction project area was higher than the non-project area. Desirable method proposal of monitoring survey was established and the method for raising the efficiency of monitoring survey was extracted.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1481-1500
• /
• 2016

Device-to-Device (D2D) communication underlaying macro-small cell networks, as one of the promising technologies in the era of 5G, is able to improve spectral efficiency and increase system capacity. In this paper, we model the cross- and co-tier D2D communications in two-tier macro-small cell networks. To avoid the complicated interference for cross-tier D2D, we propose a mode selection scheme with a dedicated resource sharing strategy. For co-tier D2D, we formulate a joint optimization problem of power control and resource reuse with the aim of maximizing the overall outage capacity. To solve this non-convex optimization problem, we devise a heuristic algorithm to obtain a suboptimal solution and reduce the computational complexity. System-level simulations demonstrate the effectiveness of the proposed method, which can provide enhanced system performance and guarantee the quality-of-service (QoS) of all devices in two-tier macro-small cell networks. In addition, our study reveals the high potential of introducing cross- and co-tier D2D in small cell networks: i) cross-tier D2D obtains better performance at low and medium small cell densities than co-tier D2D, and ii) co-tier D2D achieves a steady performance improvement with the increase of small cell density.

• 한국디지털정책학회:학술대회논문집
• /
• 2007.06a
• /
• pp.127-143
• /
• 2007

As the informationized society develops, for companies to be industrially competitive in global competition, innovation of business administration through informationization is a nation-wide task that must be driven. Small-to-mid size companies also tend to recognize the need for informationization and build the information systems, improving their informationization levels. To reduce errors in bringing in and running the information systems and increase efficiency In using them, the need for the standard and guide for informationization in small-to-mid size companies has increased. Accordingly, the national office of small and medium business administration has developed the informationized management system (IMS) certification standard in order to provide a national motive to secure the means for management innovation of small-to-mid size companies and have them recognize informationization as a business strategy. Now, there arises the need for the IMS certification standard, which was developed in early 2000, due to changes in environments of small-and-medium businesses and problems that have been revealed in field applications. In this research, we have examined the current situations of informationization in small-and-medium businesses that were revealed by the 2005 survey on the levels of informationization in small and medium business, have drawn the problems that have occurred in the process of applying the IMS in many small-to-mid size companies, have devised the measures against those problems, and have proposed a new IMS certification standard that reflects those measures. This research has proposed only the direction for development of the IMS certification standard. Future researches should deal with detailed items and criteria for evaluation and continuous improvement of them.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.33-40
• /
• 2012

Recently, to enhance the quality and efficiency of health care services, smart health care services utilizing a smart phone and tablet pc are mainly being introduced into the large hospital and the interest for personal health record service which manages personal medical information utilizing PC and smart phone and technology development is actively underway. In order to build a next generation hospital information systems, the interoperability of data between the different hospital information systems and UX consistency between the various user devices must be assured. Therefore, in this paper, medical information standard and the study for improving the performance is conducted to design the gateway system which converting and integrating the medical information under multi-platform environment. In this paper, CCR standard is adapted to the mapping method between the data which is the key feature of the gateway system and design the system utilizing multi-table-based mapping method. To evaluate the performance of the system, experiment was done and the result has been improved approximately 20 percent for response rate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.147-154
• /
• 2015

Recently agile development process became increasing effectiveness, quality, attention to experts in customer satisfaction, as evidenced in this methodology when selecting projects promoting productive efficiency. With regard to contemporary needs and user requirements on the methodology selected to meet this paper is the product based Cross functional team suggested methodology Feature Team model to solve problems of this model, and organizing the Cross functional team, this team but this outcome (product) basis, were examined for the model that points to progress the development across multiple product as a functional unit, value-driven agile project through the Skills-based model and proposed a difference. And it examined the Agile Maturity metrics. PRINCE2 Agile Health-check entries future development direction of Agile techniques is a requirement of the project outset has studied the subject objective evaluation by the assumption that they can be changed at any time, not fixed this way and for the project team through research The proposed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.993-1000
• /
• 2009

In general, a drilled shaft embedded in weathered rock has a large load bearing capacity. Therefore, most of the load tests are performed only up to the load level that confirms the pile design load capacity, and stopped much before the failure load of the pile is attained. If a reliable failure load value can be extracted from the premature load test data, it will be possible to greatly improve economic efficiency as well as pile design quality. The main purpose of this study is to propose a standard for judging the reliability of the failure load of piles that is obtained from extrapolated load test data. To this aim, eleven static load test data of load-displacement curves were obtained from testing of piles to their failures from 3 different field sites. For each load-displacement curve, loading was assumed as 25%, 50%, 60%, 70%, 80%, and 90% of the actual pile bearing capacity. The limited known data were then extrapolated using the hyperbolic function, and the failure load was re-determined for each extrapolated data by the ASCE 20-96 method (1997). Statistical analysis was performed on the reliability of the re-evaluated failure loads. The results showed that if the ratio of the maximum-available displacement to the failure-load displacement exceeds 0.6, the extrapolated failure load may be regarded as reliable, having less than a conservative 20% error on average. The applicability of the proposed standard of judgment was also verified with static load test data of driven piles.