• Food Science and Preservation
• /
• v.4 no.1
• /
• pp.53-59
• /
• 1997

Physicochemical properties affecting on the quality of Citrus unshiu Marc. var miyagawa and C. unshiu Marc. var, okitsu according to cultivation area in Cheju were investigated. Linear correlations (r>0.9) were showed between fruit size and peel thickness. There were much difference between cultivation areas in soluble solids of C. unshiu Marc. var. okitsu. The difference were not so much in soluble solids and acid contents of citrus fruits produced at same area below 65mm of fruit diameter, but the quality of large size fruits were inferior. Brix/Acid ratio could not be index for quality evaluation, because of individual deviation. Soluble solid content of citrus fruits produced in south Cheju was higher than that produced in north Cheju. Acid content and Brix/Acid ratio of citrus fruits produced in south Cheju was lower than that produced in north Cheju. The quality of C. unshiu Marc. var. miyagawa clad not so much difference between cultivation area, but the difference of quality were recognized significantly in C. unshiu Marc. var. okitsu.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.97-104
• /
• 2015

Due to the introduction of various IT devices, including the recently smartphones and the widespread use of the car navigation system to the location-based information service space has been increased. Spatial information users have been requiring higher levels of quality. In this paper, we study how to build accurate three-dimensional space information by integrating MMS(Moblie Mapping System) survey and airborne survey data. Thus, to analyze the tendency of deviation between the MMS survey and airborne survey data observed in the experimental region, the deviation tendency of the data, it was confirmed that was not consistent. Deviation correction model to select how to change the georeferencing information directly contained in the GPS/INS processing results for the determination, classifies the standard is a method for acquiring the correction reference point coordinates using the calibration model, and analyzed their advantages and disadvantages. With the information of the reference point obtained by airborne photograph of a project, using the method of correcting the MMS survey data. Not only clear the deviation existing between the MMS survey data, it was possible to confirm that the deviation exists between the airborne survey data and MMS survey data was also almost erased.

• Journal of Korean Society on Water Environment
• /
• v.29 no.2
• /
• pp.212-222
• /
• 2013

A watershed model was constructed using Hydrological Simulation Program Fortran to quantitatively predict the stream flows at major tributaries of Nakdong River basin, Korea. The entire basin was divided into 32 segments to effectively account for spatial variations in meteorological data and land segment parameter values of each tributary. The model was calibrated at ten tributaries including main stream of the river for a three-year period (2008 to 2010). The deviation values (Dv) of runoff volumes for operational stream flow forecasting for a six month period (2012.1.2 to 2012.6.29) at the ten tributaries ranged from -38.1 to 23.6%, which is on average 7.8% higher than those of runoff volumes for model calibration (-12.5 to 8.2%). The increased prediction errors were mainly from the uncertainties of numerical weather prediction modeling; nevertheless the stream flow forecasting results presented in this study were in a good agreement with the measured data.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.570-581
• /
• 2016

A watershed model was constructed using the Hydrological Simulation Program Fortran to predict the water quality, especially chlorophyll-a concentraion, at major tributaries of the Nakdong River basin, Korea. The BOD export loads for each land use in HSPF model were estimated at $1.47{\sim}8.64kg/km^2/day$; these values were similar to the domestic monitoring export loads. The T-N and T-P export loads were estimated at $0.618{\sim}3.942kg/km^2/day$ and $0.047{\sim}0.246kg/km^2/day$, slightly less than the domestic monitoring data but within the range of foreign literature values. The model was calibrated at major tributaries for a three-year period (2008 to 2010). The deviation values ranged from -31.5~1.6% of chlorophyll-a, -24.0~2.2% of T-N, and -5.7~34.8% of T-P. The root mean square error (RMSE) ranged from 4.3~44.4 ug/L for chlorophyll-a, -0.6~1.5 mg/L for T-N, and 0.04~0.18 mg/L for T-P, which indicates good calibration results. The operational water quality forecasting results for chlorophyll-a presented in this study were in good agreement with measured data and had an accuracy similar with model calibration results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.3
• /
• pp.381-388
• /
• 2003

An experimental study was carried out to measure the heat transfer coefficient in flow boiling to mixtures of HFC-l34a and HCFC-123 in a uniformly heated horizontal tube. Tests were run at a pressure of 0.6 MPa and in the ranges of heat flux 1-50 kw/$m^2$, vapor quality 0-100 % and mass velocity 150-600 kg/$m^2$s. Heat transfer coefficients of mixture were less than the interpolated values between pure fluids both in the low quality region where the nucleate boiling is dominant and in the high quality region where the convective evaporation is dominant. Measured data of heat transfer are compared to a few available correlations proposed for mixtures. The correlation of Jung et. al. satisfactorily predicted the present data, but the data in lower quality was overpredicted and underpredicted the high quality data. The correlation of Kandlikar considerably underpredicted most of the data. and showed the mean deviation of 35.1%.

• Journal of Korean Society for Quality Management
• /
• v.38 no.4
• /
• pp.540-548
• /
• 2010

We consider the problem of selecting the most profitable initial process mean and length of production cycle for manufacturing processes subject to a constant linear trend during the same cycle that varies after resetting the processes. Assuming that the quality characteristic of interest is normally distributed, the optimum initial process mean and the length of production cycle are jointly obtained by minimizing the expected loss per unit time. We assume that the quality loss function due to the deviation from the target value is quadratic and resetting loss is constant. We consider both cases of symmetric and asymmetric quality loss function. An illustrative example is given and sensitivity analysis performed.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.163-168
• /
• 2013

Today, a desirable way to manage livestock manure is to activate its utilization as a resource. The production of high quality liquid fertilizer of livestock manure is very important because it increases the use of various liquid fertilizer. However, the result of mature evaluation with a maturity measuring instrument for liquid fertilizer showed that the deviation of concentration between liquid fertilizer did not bring into uniformity. The result is also making sure that quality management for liquid fertilizer is not smoothly made. Quality evaluation for compost and liquid fertilizer includes physical, biological, chemical and microbiological methods, but a chemical method is mainly being implemented due to fairness and field application. Therefore, this study figured out correlation in feces and urine through regression analysis of livestock manure and tried to create a research plan to carry out efficient quality analysis of managing livestock manure.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.523-535
• /
• 2019

Purpose: We research on the efficient response surface methodology(RSM) design to develop a design space in Quality by Design(QbD). We propose practical designs for the successful construction of the design space in QbD by allowing different number of replicates at the box points, star points, and the center point in the rotatable central composite design(CCD). Methods: The fraction of design space(FDS) plot is used to compare designs efficiency. The FDS plot shows the fraction of the design space over which the relative standard error of predicted mean response lies below a given value. We search for practical designs whose minimal half-width of the tolerance interval per a standard deviation is less than 4.5 at 0.8 fraction of the design space. Results: The practical designs for the number of factors between two and five are listed. One of the designs in the list could be chosen depending on the experimental budget restriction. Conclusion: The designs with box points replications are more efficient than those with the star points replication. The sequential method to establish a design space is illustrated with the simulated data based on the two examples in RSM.

• Journal of Korean Society for Quality Management
• /
• v.50 no.2
• /
• pp.199-220
• /
• 2022

Purpose: The purpose of this study is to analyze the score data released by the Korea Institute of Curriculum and Evaluation to find out the problems with the current scoring system provided by the College Scholastic Ability Test and to suggest improvement measures to solve these problems. Methods: We calculated the descriptive statistics of the standard scores using the frequency distribution table of the standard scores and identified the characteristics of the standard scores by expressing the distribution as a graph. Also, we developed an index to evaluate whether each stanine level was stably assigned and calculated the indexes for each area/subject by using the data on the number of examinees for each level. Results: We found that the relationship of conversion from raw scores to integerized standard scores is different depending on the size of the standard deviation of the raw scores, and identified the problem that the raw score information is not fairly reflected in the calculation of the percentile and level as the two raw scores are converted to one standard score. This problem can be solved by calculating the standard score to a decimal point. Conclusion: In this study, as a way to improve the quality of the scores of the current CSAT, the standard score and percentile decimal notation, the specific regulations of the standard score and stanine level calculation method, and the expansion of the open range of the scores were suggested.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.509-520
• /
• 2018

The impact of meteorological condition on surface $PM_{10}$ concentrations in South Korea was quantitatively simulated from 2010 to 2014 using WRF (ver.3.8.1) and CMAQ (5.0.2) model. The result showed that seasonal standard deviations of PM10 induced by change of weather conditions were $4.8{\mu}g/m^3$, $1.7{\mu}g/m^3$, $1.7{\mu}g/m^3$, $4.2{\mu}g/m^3$ for spring, summer, autumn and winter compared to 2010, respectively, with the annual mean standard deviation of about $2.6{\mu}g/m^3$. The results of 18 regions in South Korea showed standard deviation of more than $1{\mu}g/m^3$ in all regions and more than $2{\mu}g/m^3$ in Seoul, Northern Gyeonggi, Southern Southern Gyeonggi, Western Gangwon and Northern Chungcheong in South Korea.