• 제목/요약/키워드: Qualitative number

검색결과 944건 처리시간 0.026초

입출력 정보 조건에 따른 코드 설계 평가 방법 분석 (Analysis of Code Design Evaluation Methods According to Input/Output Information Conditions)

  • 허경
    • 실천공학교육논문지
    • /
    • 제16권3_spc호
    • /
    • pp.259-265
    • /
    • 2024
  • 대학 학부생들의 SW융합 역량을 향상하기 위해서는, 관련 강좌의 개발과 함께 학부생들의 코드 설계 역량을 평가하는 방법이 연구되어야 한다. 기존 연구에서는 코드 결과물에 대해 정성적인 평가방법과 정량적인 상대평가방법이 있었으며, 정량적인 상대평가방법에서는 문제분해깊이 수, 함수재사용 회수와 함수 개수를 측정하여 평가하였다. 본 연구에서는 기존 연구에서 제시되지 않은 평가방법으로서, 코드 설계 시 입력과 출력 정보종류의 수를 제시하는 문제를 이용한 평가방법을 제안하였다. 본 논문에서 제안한 평가 문제들은 입력 정보 종류의 수와 출력 정보 종류의 수를 3개까지 적용하였다. 이를 통해 5가지 코드설계 평가문제를 제시하고 코드설계 점수를 정량적으로 산출하는 방법을 제안하였다. 제안한 평가방법을 적용한 강좌를 통해 100명 학생 응답자들의 코드들을 수집하고 분석하였다. 결과 분석을 통해, 문제분해깊이 수는 입력 정보의 종류 개수에 비례하고, 함수 재사용 회수는 출력 정보의 종류 개수에 비례하며, 함수 개수는 입력과 출력 정보의 종류 총개수에 비례하는 상관성을 나타내었다. 마지막으로 100명 응답자의 평가 점수 분포를 분석하여, 5가지 입출력 정보 조건 평가문제에 따른 코드설계 평가 방법이 유효함을 설명하였다.

혼자놀이에서 5-6세 '한국어-영어' 동시습득 이중언어아동의 한국어 조사(助詞) 습득분석 (Korean Nominal Particles Development in Korean-English Simultaneous Bilingual Children)

  • 이하원;최경숙
    • 아동학회지
    • /
    • 제29권6호
    • /
    • pp.147-161
    • /
    • 2008
  • The present study compared characteristics of Korean nominal particles (occurrence, error, error patterns) of ten 5- to 6-year-old Korean-English simultaneous bilingual children with ten Korean monolingual children. Data were analyzed by Mann-Whitney U test and Spearman Rank Correlation and by qualitative analysis. Results were (1) bilingual children showed significantly lower frequency based on the number of occurrence of nominal particles per utterance. (2) The error percentage of adverbial markers was significantly higher for bilingual children. (3) Error patterns of bilingual children showed a higher percentage of in-case substitution and double use error. These findings suggest that Korean-English simultaneous bilingual children have a different Korean nominal particles development from Korean monolingual children.

  • PDF

Quantitative and qualitative analysis of autophagy flux using imaging

  • Kim, Suree;Choi, Soohee;Kang, Dongmin
    • BMB Reports
    • /
    • 제53권5호
    • /
    • pp.241-247
    • /
    • 2020
  • As an intracellular degradation system, autophagy is an essential and defensive cellular program required for cell survival and cellular metabolic homeostasis in response to various stresses, such as nutrient deprivation and the accumulation of damaged organelles. In general, autophagy flux consists of four steps: (1) initiation (formation of phagophore), (2) maturation and completion of autophagosome, (3) fusion of autophagosomes with lysosomes (formation of autolysosome), and (4) degradation of intravesicular components within autolysosomes. The number of genes and reagents that modulate autophagy is increasing. Investigation of their effect on autophagy flux is critical to understanding the roles of autophagy in many physiological and pathological processes. In this review, we summarize and discuss ways to analyze autophagy flux quantitatively and qualitatively with the use of imaging tools. The suggested imaging method can help estimate whether each modulator is an inhibitor or a promoter of autophagy and elucidate the mode of action of specific genes and reagents on autophagy processes.

Technological Catching-up of Nuclear Power Plant in Korea: The Case of OPR1000

  • Lee, Tae Joon;Lee, Young-Joon
    • Asian Journal of Innovation and Policy
    • /
    • 제5권1호
    • /
    • pp.92-115
    • /
    • 2016
  • This paper presents how Korea succeeded in developing an indigenous nuclear power plant model over fifty years. Long-lasting national R&D for technical progress and the Korean government for managerial process were the two pillars in the build-up of indigenous Nuclear Power Plant (NPP) technological capabilities. The concept of technological capabilities is used to examine its evolutionary process with a qualitative and longitudinal approach. The government had a developing country ambition to formulate a strategic plan for technical self-reliance on nuclear power plant while establishing the country’s institutions and organization structure for the plan. Under the government leadership, it was national R&D that led to the resolution of a good number of technological problems, efficiently, by absorbing imported technologies and effectively adapting them to local circumstances.

Factors Influencing University Students' Perception on Vegetarian Restaurants

  • Kim, Hyojin;Lee, Sang-Hyeop;Goh, Pei-En
    • 한국조리학회지
    • /
    • 제23권1호
    • /
    • pp.1-9
    • /
    • 2017
  • The number of vegetarian restaurants in Malaysia has been increasing as people are motivated by various reasons to consume vegetarian foods. In addition, university students contribute to the economy, hence it is important for investors or owners of vegetarian restaurants to understand university students' perceptions on vegetarian restaurants based on their own experiences. This research provided an insight of factors influencing university students, such as family members, religion, trend and health. The objective of this research was to identify the perceptions of university students on vegetarian restaurants. This research used a qualitative approach by conducting a focus group interview with university students as a source of data collection. The six respondents were selected based on the criteria of university students in Malaysia who are consuming vegetarian food. Findings enabled investors and owners of vegetarian restaurants to have an in-depth understanding on the factors influencing university students' perceptions on vegetarian restaurants and take necessary action to accommodate them.

레이놀즈응력모델을 이용한 난류의 고분자물질 첨가 저항감소현상에 대한 수치해석 (Numerical Analysis of Drag-Reducing Turbulent Flow by Polymer Injection with Reynolds Stress Model)

  • 고강훈;김광용
    • 대한기계학회논문집B
    • /
    • 제24권1호
    • /
    • pp.1-8
    • /
    • 2000
  • A modified low-Reynolds-number Reynolds stress model is developed for the calculation of drag-reducing turbulent flows induced by polymer injection. The results without polymer injection are compared with the results of direct numerical simulation to ensure the validity of the basic model. In case of drag reduction, profiles of mean velocity and Reynolds stress components, in two-dimensional channel flow, obtained with a proper value of viscosity ratio are presented and discussed. Computed mean velocity profile is in very good agreement with experimental data. And, the qualitative behavior of Reynolds stress components with the viscosity ratio is also reasonable.

간호학과 편입생의 체험 (The Lived Experience of a Student Transferring into the Nursing Program)

  • 신경림;차은정;김영혜
    • 대한간호학회지
    • /
    • 제33권6호
    • /
    • pp.722-730
    • /
    • 2003
  • Purpose: This study attempted to describe the essential structure of the lived experience of a students transferring into the nursing program. Method: The data was collected from 14 graduates and undergraduates who enrolled in nursing school as transfer student. The analysis of the data was made by phenominological analytic method suggested by Colaizzi(1978). Result: In this study, 6 essential themes were extracted: ‘Constant anxiety of being a stranger’, ‘Feeling of constant burden’, ‘Thankfulness of a clinical practice group’, ‘Being supportive with each other between transferring students’, ‘Pleasure of studying a desired major’, ‘Feeling the responsibility of own choice of a new major’, Conclusion: With rapidly increasing number of transferring students, the significance of this study in the field of nursing is that by understanding the transferring experience of nursing students, it describes the need of systematic and emotional support for transferring students.

혐기성 조건에서 담체에 부착된 미생물의 관찰 (Microscope Examination of Attached Biofilm under Anaerobic Conditions)

  • 박성열;김도한;나영수;박영식;송승구
    • 한국환경보건학회지
    • /
    • 제27권1호
    • /
    • pp.100-105
    • /
    • 2001
  • Microstructural examinations were performed on the anaerobic biofilm from reactor filled with PE support media. Optical microscope, SEM and fluorescent microscope were used for qualitative and morphological studies on the attached microorganism under anaerobic condition. Microorganisms were attached in crevices where protection from shear forces of surfaces where easy to contact with support media surface. A hypothesis for biofilm accumulation occurs on a surface such as polymer support media is presented schematically : 1st step ; cell-support media attachment, 2nd step ; cell-support media attachment and cell-cell attachment, 3rd step ; attached biofilm from neighboring crevices joins together and growing, 4th step ; mature and irregualar biofilm was formed. In SEM photographs, shape and structures of biofilm were observed, but microorganism species and methanogens were not identified. A large number of methanogenic bacteria were identified on the surface of PE substratum by fluorescence under 480nm of radiation and it was estimated that methanogenic bacteria was related to initial attachment of bacteria under anaerobic condition.

  • PDF

수직 동심 환형관 내의 난류혼합대류 현상에 관한 직접수치모사 (Direct Numerical Simulation of Turbulent Mixed Convection in Heated Vertical Annulus)

  • 전용준;배중헌;유정열
    • 대한기계학회논문집B
    • /
    • 제33권9호
    • /
    • pp.674-681
    • /
    • 2009
  • Turbulent mixed convection in heated vertical annulus is investigated using Direct Numerical Simulation (DNS) technique. The objective of this study is to find out the effect of buoyancy on turbulent mixed convection in heated vertical annulus. Downward and upward flows with bulk Reynolds number 8500, based on hydraulic diameter and mean velocity, have been simulated to investigate turbulent mixed convection by gradually increasing the effect of buoyancy. With increased heat flux, heat transfer coefficient first decreases and then increases in the upward flow due to the effect of buoyancy, but it gradually increases in downward flow. The mean velocity and temperature profiles can not be explained by the wall log laws due to the effect of buoyancy, too. All simulation results are in good quantitative agreement with existing numerical results and in good qualitative agreement with existing experimental results.

Anatomy and Morphology of Two Hawaiian Endemic Portulaca Species

  • Kim, InSun
    • Applied Microscopy
    • /
    • 제44권2호
    • /
    • pp.41-46
    • /
    • 2014
  • In this study, the vegetative and reproductive morphology and anatomy of two Hawaiian endemic Portulaca species were examined. Specifically, P. molokiniensis and P. sclerocarpa were compared to closely related species in the genus. The comparisons were both qualitative and quantitative, using characteristics of leaves, stems, roots, and fruits. Tissue organizations of vegetative and reproductive parts of the plants were assessed using microtechnique procedures, statistical analysis, and scanning electron microscopy. The most notable features of these two species were (1) the size and frequency of stomata in P. molokiniensis, and (2) the large number of sclerenchymatous cell layers in the thickest fruit walls of P. sclerocarpa. These findings may imply that stomata development in P. molokiniensis and thick fruit wall development in P. sclerocarpa are evolved features of survival. In particular, the development of thickened walls in indehiscent fruits likely has evolutionary implications of ecological tolerance for better adaptation.