• Journal of the Korean Applied Science and Technology
• /
• v.23 no.4
• /
• pp.273-279
• /
• 2006

Water quality has been deteriorated by the increasing amount of industrial waste water that is due to the better standard of living. In order to lessen the polluted water and substantially reutilize it at factories, a new method is needed. The plasma generator, which uses discharge current below 1,500 voltage and processes at extremely low temperature, has more strong oxidization than current method and an advantage of miniaturizing the apparatus in dealing with waster water by producing carrier gas at room temperature. This study were measured on the 3 kinds of waster water to the plasma generator for 120 minutes. As results, COD was almost decreased and removed in 15 minutes. The results suggest that the plasma generator can be used reduce COD and removal of color for various waster water, which can be reutilized as industrial water, It would be of benefit to the country like Korea in which qualified water is deficient.

• Quality Improvement in Health Care
• /
• v.19 no.1
• /
• pp.16-26
• /
• 2013

Health information technology (HIT) is one of the most familiar tools to healthcare providers. It is used in routine practice to reduce cost, to improve clinical performance, and to improve patient safety. Patient safety is the driving force of recent expansion of HIT industry. But there are many evidences that it can be harmful to patient safety. Role of HIT and HIT-related error became big issues because more and more healthcare providers and healthcare organizations are willing to adopt it. Adoption rate of HIT in Korea is higher than that of United States. But researches of HIT regarding patient safety are rare. In this article, types of HIT, their mechanisms of improving patient safety and HIT-related errors were reviewed. Status of HIT in terms of patient safety in Korea was also reviewed. Knowledge of how HIT can improve patient safety, its' limitation, and how to make it safer is crucial to whom have to use it to improve patient safety. Impact of HIT on patient safety must be evaluated actively in Korea. HIT which was proven to improve patient safety must be widely adopted. Government must prepare a strategic plan to improve HIT quality, support hospitals financially and institutionally to introduce qualified HIT, and develop HIT infrastructures and standard designed for patient safety.

• Advances in Energy Research
• /
• v.7 no.1
• /
• pp.53-66
• /
• 2020

Before the industrial revolution architecture has been shaped by the natural and cultural inputs. Local constraints become more effective determinants of architecture in the rural contexts because by being disengaged from the webs of transportation and communication, rural settlements have achieved sustainability in difficult conditions. The examples of rural settlement and architecture have provided sustainability through integration with natural inputs within the geographical context because they have reached the goals of ecological design within the local constraints. Although this feature of the rural cultural landscapes has been emphasized frequently, tangible standards could not be developed in order to interpret their ecological design principles from the perspectives of the contemporary building sector and planning. However, the historical experience indicates that the sustenance of ecological performance can be possible as a result of integrated planning at the overall scale of the settlement. Therefore, the existing standards are not qualified for interpreting the rural contexts. This study develops a method for analysing, interpreting and evaluating traditional rural settlements and certifying new implementations in the rural environments in the light of the given literature review, discussion and methodological proposal.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.4
• /
• pp.217-222
• /
• 1999

Changes in certain fish behaviors are known to be very sensitive indicators of sublethal exposure to environmental contaminants. Therefore, behavioral toxicity tests, if properly designed, can be very useful to assess the influence of hazardous chemicals on fish. However, quantitative analysis of xenobiotic-mediated changes in locomotor behavior in fishes are rare, due mainly to the methodological difficulties. In general, fish movement has been known to be hypertrophic or hypotrophic according to the chemicals. As a study of fish behavioral toxicities, we qualified the swimming movement of Oryzias latipes using computer-automated video tracking system. Oryzias latipes was exposed to cadmium of 128 mg/L for 1 hour in a limited aquaria, then the total swimming distance, the average swimming velocity, the histogram of turning angles, and the turning frequency were analyzed. Fish treated with cadmium showed decreased swimming activities, decreased velocity, and decreased turning frequency, which means hypotrophic activity. From these results, the computer-automated video tracking system of this study seems to be a good tool for the evaluation of the potential ecotoxicological studies.

• Environmental Analysis Health and Toxicology
• /
• v.19 no.2
• /
• pp.183-189
• /
• 2004

To obtain the residual organochlorine pesticides in the culture environment of ginseng on Sangju, Gyeongbuk, the analytical methods for BHC isomers, Aldrin, DDE, Dieldrin, DDD, Endrin and DDT by GCECD are surveyed. The relative retention times for $\alpha$-BHC, $\beta$-BHC, ${\gamma}$-BHC, $\delta$-BHC, Aldrin, DDE, Dieldrin, DDD, Endrin and DDT were 1.000, 1.042, 1.049, 1.086, 1.202, 1.335, 1.341, 1.371, 1.391 and 1.439, respectively The BHC isomers, Aldrin, DDE, Dieldrin, DDD, Endrin and DDT were separated on the base line. The qualified detection concentration for $\alpha$-BHC, $\beta$-BHC, ${\gamma}$-BHC and $\delta$-BHC is 0.43, 1.33, 0.54 and 1.63 ng/g and it's of Aldrin, DDE, Dieldrin, DDD, Endrin and DDT were 0.63, 0.50, 0.66, 0.74, 0.96 and 0.88ng/g, respectively. BHC isomers, Aldrin, DDE, Dieldrin, DDD, Endrin and DDT were not detected in culture environment of ginseng on Sanaju, Gyeongbuk. The detection concentration for Hg, Cd, Pb, Cr, and As in ginseng were 0.0086ppm, 0.0020ppm, 0.0200ppm, 0.0271ppm and 0.0220ppm, respectively, which were also lower than the 30ppm Korea Food & Drug Administration advisory level for heavy metal in herbal medicines.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.4
• /
• pp.64-70
• /
• 2015

A rapid urbanization has increased the portion of paved layer that results in the change of water circulation system. This change leads to frequent events of flooding, drought, and urban heat island. To resolve these issues, permeable pavement system based on Low Impact Development (LID) concept is being applied to international urban areas. Therefore it is necessary to establish a rational design procedure for the permeable pavement system that reflects our environmental conditions. iDue to inherent characteristics of permeable pavement system, water infiltrates thorough the layers so it may reduce the bearing capacity of sub-layers. In this study, an effort was made to investigate the effectiveness of geogrid reinforced crushed stone subbase layer based on field experimental program along with a limited numerical analysis. It reveals that geogrid reinforced sections improve the bearing capacity by close to 20%. In addition, a light weight deflectomenter (LWDT) appears to be promising for the compaction quality control of crushed stone subbase layer in order to construct qualified permeable pavement systems.

• Journal of Information Technology Services
• /
• v.12 no.3
• /
• pp.273-287
• /
• 2013

The objective of this study is to empirically develop performance evaluation measures for LIS (logistics information systems) based upon BSC (balanced scorecard) model and determine the relative importance among four perspectives of BSC using AHP (analytic hierarchy process) methodology. Above all, forty nine probable measures for evaluating LIS performance were identified through reviewing the previous research related with SCM (supply chain management), logistics management, and information systems evaluation. And then, these probable measures were examined by means of coincidence analyses using three mutually exclusive criteria(validity of content, ease of measurement and reliability of measurement). Data for conducting the coincidence analyses were collected from LIS users and LIS development personnel. As the results of the coincidence analyses, it was found that 31 ones among 49 probable performance evaluation measures theoretically derived could be qualified for LIS performance evaluation. And AHP analysis showed that the weight of each perspective was respectively as follows : 46.8% for financial perspective, 31.3% for customer perspective, 14.8% for internal business process perspective, and 7.1% for learning and growth perspective. The academic contribution of this study is that performance evaluation measures for LIS could be systematically and empirically developed on the basis of BSC. Also, the results of this study are expected to be used as a practice guideline of evaluating and improving LIS.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.6
• /
• pp.25-31
• /
• 2017

Purpose - This study examines car accidents that occurred in South Korea territory, and analyzes criminal liability of the offender and certain issues of driver's insurance, but a civil liability to the injured is excluded as civil liability belongs to auto insurance. Research design, data, and methodology - With carrying out this research, case study of driver's liability and literature review were adopted throughout. For this, car accidents that occurred in South Korean territory were examined and then criminal liability of the offender and certain issues of driver's insurance were analyzed. Results - From this case study on driver's liability it was found that the offender cannot receive insurance money from the insurer irrespective of the valid drive insurance, if there is no 'bill of agreement of criminal consensus'. This study suggests some ideas, offers suggestions of convenience and assistance of qualified claim staff to overcome a hurdle of drive insurance. Conclusions - As long as the accident is not a fraud and scam by the parties concerned, advance payment of agreement of criminal consensus is required to the insured, the policy holder within the limit of liability of driver insurance, on condition that the drive insurance is valid.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.7
• /
• pp.7-15
• /
• 2008

A single active capacitor snubber-assisted soft-switching sinewave pulse modulation utility-interactive power conditioner with a three-winding flyback high frequency transformer link and a bidirectional active power switch in its secondary side has been proposed. With the aid of the switched-capacitor quasi-resonant snubber cell, the high frequency switching devices in the primary side of the proposed DC-to-AC sinewave power inverter can be turned-off with ZVS commutation. In addition to this, the proposed power conditioner in the DCM can effectively take the advantages of ZCS turn-on commutation. Its output port is connected directly to the utility AC power source grid. At the end, the prototype of the proposed HF-UPC is built and tested in experiment. Its power conversion conditioning and processing circuit with a high frequency flyback transformer link is verified and the output sinewave current is qualified in accordance with the power quality guidelines of the utility AC interactive power systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.632-638
• /
• 2002

Extensible 3D(X3D) is a software standard for defining interactive web and broadcast-based 3D content integrated with multimedia. The data size of Web3D representation based on polygon meshes is so large that transferring practical data fast is a hard problem. This paper proposes 3D object structure, a new framework for compact 3D representation with high quality surface shape. By utilizing a free form surface technique, qualified surface are transferred with limited amount of data size and rendered. 3D graphic structure can be regarded ad both polygon meshes and free form surfaces. Therefore, it can be easily integrated to existing Web3D data formats, for example VRML ＆ XML. 3D object structure also enables modeling free form surface shapes intuitively with polygon modeling like operations.