• 한국의학물리학회지:의학물리
• /
• 제4권1호
• /
• pp.9-15
• /
• 1993

의료용 가속기의 QC/QA는 방사선 치료 QC/QA에서 가장중요한 위치중 하나를 차지하고 있다. 이전 이유료 오래전부터 QC/QA가 강조되어 왔으며, 많은 종류의 QC/QA가 소개되어왔다. 본 연구에서는 기존의 QC/QA 프로그램을 비교하고 합리적인 의료용 선형가속기 QC/QA에 대한 주기, 방법등에 관해 기술하였다.

• 한국입자에어로졸학회지
• /
• 제7권1호
• /
• pp.31-44
• /
• 2011

The hourly volatile organic compounds(VOCs) concentrations between 2005 and 2008 at Bulgwang photochemical assessment monitoring station were investigated to establish a method for quality assurance and quality control(QA/QC) procedure. Systematic error, erratic error, and random error, which was manifested by outlier and highly fluctuated data, were checked and removed. About 17.3% of the raw data were excluded according to the proposed QA/QC procedure. After QA/QC, relative standard deviation for representing 15 species concentrations decreased from 94.7-548.0% to 63.4-125.8%, implying the QA/QC procedure is proper. For further evaluation about the adequacy of QA/QC procedure, principal components analysis(PCA) was carried out. When the data after QA/QC procedure was used for PCA, the extracted principal components were different from the result from the raw data and could logically explain the major emission sources(gasoline vapor, vehicle exhaust, and solvent usage). The QA/QC procedure based on the concept of errors is inferred to proper to be applied on VOCs. However, an additional QA/QC step considering the relationship between species in the atmosphere needs to be further considered.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권3호
• /
• pp.134-141
• /
• 2014

A testing inspection is one of the important in the industry, owing to determine the reliability and directivity of testing inspection results. Therefore, the quality assurance and quality control (QA/QC) work which performed by personnel not directly in the inventory compilation development, in testing inspection must be thoroughly considered. Some agencies for environmental test inspection, they sometimes misunderstood that the QA/QC was ended with proficiency testing performance and on-site assessment by a director. Thus, results were often calculated without QA/QC work by self manual when conducting test. The objective of this study was to improve reliability of testing and inspection agency through the QA/QC case study which basically performed to raising reliability of testing and inspection agency. In this study, it increased reliability of result by verifying calibration curve (IC, ICV, CCV), blank, accuracy (LCS, MS) and precision as QA/QC performance, while performing investigation of soil contamination in mining areas. This study suggests that reliability establishing method of test result and management method of analysis process, through the QA/QC instance of testing agency.

• 분석과학
• /
• 제18권6호
• /
• pp.475-482
• /
• 2005

화학분석 분야에는 ISO 17025에 따른 체계적 품질 관리/보증의 요구가 커지면서, 측정 불확도의 표기가 크게 요구되고 있다. 측정품질의 정량화를 위하여, 화학분석의 QA/QC 문헌들로부터 화학분석 품질에 영향을 미치는 중요한 불확도 요소를 선정하였고, 이것을 측정결과 평가 요소의 기본인 7개의 품질요소로서 반복성, 직선성, 소급성, 변동성, 매질효과, 균질성, 안정성으로 구분하였다. 화학분석의 QA/QC를 위한 이 7대 품질 요소의 측정 모델화, 표준불확도의 계산 및 합성방법을 각각 예로서 제시하였다.

• 한국대기환경학회지
• /
• 제20권2호
• /
• pp.251-261
• /
• 2004

In this article, an in-depth review is presented to explain the present status of QC and QA for air quality monitoring, especially with respect to a few pollutants of which measurement requires high standard such as VOC and heavy metals. Upon reviewing the reported results of various studies conducted previously, we attempted to suggest a future direction of QC and QA for the acquisition of the high quality data in the air quality monitoring.

• Radiation Oncology Journal
• /
• 제24권3호
• /
• pp.185-191
• /
• 2006

목 적: 국내 실정에 적합한 사이버나이프의 표준화된 품질관리 절차서가 없어 이를 개발하고 유용성을 평가하고자 한다. 대상 및 방법: 사이버나이프의 구조적 특성과 치료 방법 등을 고려하여 품질관리 검사항목을 설정한 후, 적합한 시행 시기에 맞추어 주기적 분류를 하였다. 그리고 설정된 항목들은 각각의 품질관리 목적에 따라 일반적인 품질관리(basic QC), 치료정확도 품질관리(delivery specific QC), 환자 맞춤형 품질관리(patient specific QC) 등 3개의 분야로 구분하였다. 국내의 두 개 기관을 대상으로 개발된 품질관리 절차서의 각 항목을 비교하여 허용오차를 분석하였다. 설정된 항목에 대한 허용 오차는 제작사에서 제공된 품질관리 자료와 현재 국내에 설치되어 있는 두 개 기관의 최근 3년간의 품질관리 수행 데이터 등을 근거하였으며, 각 항목에 대한 측정 결과를 토대로 품질관리 실태를 분석하고 개발된 품질관리 절차서의 타당성을 검증하였다. 결 과: 개발된 사이버나이프 품질관리 절차서의 항목에 대하여 두 개 기관을 대상으로 정확성을 상호 비교 분석하였다. 모든 측정 결과는 사이버나이프의 품질관리 절차서에서 제시한 허용오차 범위 내에서 일치하고 있음을 확인하였다. 결 론: 본 연구에서 개발된 품질관리 절차서를 통해 사이버나이프에 대한 성능평가 기준을 확립할 수 있으며, 영상유도 정위방사선치료에 대한 정확성 및 안전성을 확보할 수 있을 것으로 생각된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.972-978
• /
• 2008

Quality Assurance of Deep Mixing to fulfill the requirements of geotechnical design cannot be achieved only by the process control During production conducted by the deep mixing contractor but it should involve relevant activities that are carried out prior to, during and after the construction by all the parties involved in a deep mixing project. The requirement is different for different application, and hence, QA/QC method/procedure and verification technique may be different for different application. In order to maintain the high quality of deep mixing work in the global market, it is necessary to conduct a research project, such as investigation of illustrations, the variety of existing QA/QC methods/procedures, the correlation between the outcomes of different QA/QC methods. In these reason, it has been held the international meeting to discuss them, in that kind of activities in 2009 it will be held Symposium. Also Collaborative study for QA/QC is on goin, and conduction by all participated members. The subject for collaborative study are, task 1 : investigation of laboratory tests procedures, task 2 : comparing of different laboratory tests procedures, task 3 : QA/QC method/procedures, task 4 : integrated Task1 ~task 3. The discussion of the results in all task will be held in the Symposium separately. In this paper, it was presented four tasks. Also the results in task 1 and 2 conducting domestically until now, such as investigation of laboratory test procedures, effect on the unconfined compressive strength by aging temperature and by delayed time.

• 한국의학물리학회지:의학물리
• /
• 제8권2호
• /
• pp.59-65
• /
• 1997

전자포탈영상장치 (EPID)를 이용하여 의료용 선형가속기의 기하학적인 요소를 성능 평가할 수 있도록 고안하였다. light field와 radiation field 의 일치, 콜리메이터 회전축, 갠트리 회전축 크기 등을 측정하였다. EPID에서 수집한 영상정보를 이용하여 radiation-light field 일치여 부를 1mm 이내의 정밀도를 갖고 평가하였으며, 콜리메이터, 갠트리 회전축 역시 4개의 방사선 방향에 대한 영상을 중첩시켜서 중첩된 영상이 이루는 교점을 분석하여 구할 수 있었다. 이 방법으로 선형가속기의 기하학적인 QC/QA를 객관적이고 정량적으로 시행할 수 있었다.

• Radiation Oncology Journal
• /
• 제33권1호
• /
• pp.42-49
• /
• 2015

Purpose: In order to keep the acceptable level of the radiation oncology linear accelerators, it is necessary to apply a reliable quality assurance (QA) program. Materials and Methods: The QA protocols, published by authoritative organizations, such as the American Association of Physicists in Medicine (AAPM), determine the quality control (QC) tests which should be performed on the medical linear accelerators and the threshold levels for each test. The purpose of this study is to increase the accuracy and precision of the selected QC tests in order to increase the quality of treatment and also increase the speed of the tests to convince the crowded centers to start a reliable QA program. A new method has been developed for two of the QC tests; optical distance indicator (ODI) QC test as a daily test and gantry angle QC test as a monthly test. This method uses an image processing approach utilizing the snapshots taken by the CCD camera to measure the source to surface distance (SSD) and gantry angle. Results: The new method of ODI QC test has an accuracy of 99.95% with a standard deviation of 0.061 cm and the new method for gantry angle QC has a precision of $0.43^{\circ}$. The automated proposed method which is used for both ODI and gantry angle QC tests, contains highly accurate and precise results which are objective and the human-caused errors have no effect on the results. Conclusion: The results show that they are in the acceptable range for both of the QC tests, according to AAPM task group 142.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.511-514
• /
• 2011

The impact of greenhouse gas (GHG) emissions is the global issue over the world. Korean government has presented various policies to induce GHG reduction for the industries with high energy consumption such as power generation and chemistry. Construction sector has produced a large amount of GHG emissions resulted in the energy consumption of heavy equipments and the use of materials. This study aims to suggest the QA (Quality Assurance) and QC (Quality Control) method to identify and quantify the GHG emissions released from heavy equipments in the railroad construction sector. Generally, the accuracy and reliability of GHG inventory is dependent on the data collection. Therefore, it is necessary to mange the detailed statements for the fuel consumption of heavy equipments and the quantity of work in the field. Also, the breakdown of GHG emission sources should be recorded from the design step of railroad infrastructures. Based on these data, the GHG reduction technologies and polices can be applied in railroad construction sector.