• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.9-11
• /
• 2009

It is well-known that the performance of turbo codes can be improved by allocating different energies per code symbol. In this paper, based on this observation, we propose a joint encoding and modulation scheme for quadrature amplitude modulated turbo code systems. In the proposed scheme, the amount of energy difference between the turbo coded symbols is optimized by optimizing the constellation of quadrature amplitude modulation(QAM). The proposed scheme offers better coding gain compared to the conventional combination of binary turbo code and QAM at the bit error rate of $10^{-5}$.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.259-264
• /
• 2006

Using M-ary QAM and PSK, various modulation methods are researched so far. In this paper, a new constellation method of $4L^2$-PSK that normalized circular multi-layer method is proposed with the advantage of those modulation methods. These replacements of signal points complement weak points of an nonlinear radius increment as a layer increases in M-ary QAM and a low efficiency in PSK compared with QAM. But, $4L^2$-PSK have some problems that in the power efficiency and difference of BER in each layer, So in this paper suggest that advanced $4L^2$-PSK also.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.506-515
• /
• 2010

In this paper, we compare and analyze the spectral efficiency of representative adaptive MIMO algorithms in indoor environments. We first briefly investigate the modulation and demodulation schemes of MIMO algorithms to be compared and then implement adaptive algorithms by using BPSK and square QAM schemes up to 256QAM. We finally compare the spectral efficiency of adaptive MIMO algorithms employing (2$\times$2) or (4$\times$4) antenna array through the computer simulation in indoor environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.587-594
• /
• 2022

This paper analyzed radio link throughput performance by applying radio link simulation and test equipment because there is limit in train filed test in 420 km/h high speed environment. According to the radio performance analysis, the throughput performance is slightly degraded in QPSK and 16QAM modulation schemes. But throughput performance is highly degraded in 64QAM modulation scheme.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.69-72
• /
• 2000

Multilevel modulation schemes are known to be highly bandwidth efficient. By varying modulation level adaptively according to channel conditions (i.e. adaptive QAM schemes or AQAM), high bandwidth efficiency can be achieved. This paper considers the effect of time delay on the adaptive QAM schemes in dispersive fading channels. In order to undertake investigations effectively, a simulator has been developed. The simulation results show that the BER performance obtained for the wideband channel with a delay spread of 0.75 $\mu$sec is better than 10$^{-4}$ with a SNR value of 40 ㏈ and ABPS is found to be approximately 5.5.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.1
• /
• pp.37-44
• /
• 2005

본 논문에서는 멀티 코드 CDMA(Code Division Multiple Access)시스템에서 고속의 멀티미디어 서비스를 지원하기 위해 정보 데이터열을 QAM(Quadrature Amplitude Modulation) 부호화하는 방법을 제안한다. 송신 구조는 입력 비트를 정진폭 다중부호 이진직교 변조(Constant amplitude code biorthogonal modulation: 이하 CACB라 칭함)로 부호화하여 전송 심볼의 크기를 일정하게 하고 이렇게 이진화된 신호를 QAM 부호화하여 전송속도를 높인다. 복조기의 구조는 수신된 신호로부터 QAM 연판정기 블록을 거쳐 생성된 신호를 CACB 복호화기를 거쳐 데이터를 복조해 낸다. 제안된 시스템은 기존의 멀티 코드 방식에 비해 대역폭 효율을 크게 개선시킬 수 있어 전송 속도를 많이 향상시킬 수 있고, 멀티 코드 방식을 기반으로 하기 때문에 디지털 가전기기나 3세대 이동통신과, WPAN과 관련된 무선 네트워크 응용과 같은 미래의 고속의 무선 멀티미디어 서비스를 지원하기에 적합하다.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2006

Quadrature amplitude modulation-spread spectrum (QAM-SS) and code division multiplexing (CDM) are multi-level modulation schemes with high performance but they cause a large peak-average power ratio (PAPR). Therefore, this paper proposes a novel modulation scheme for high-rate transmission which follows a sequence of CDM-mapping-CDM not only to correct the above-mentioned problem but also offer a high flexibility in obtaining arbitrary multilevel modulation with very low implementation complexity and high performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.67-74
• /
• 2009

In this paper, we investigate the performance limitations of SubCarrier Multiplexed(SCM) WDM systems using optical Double-Side Band(DSB) modulated 16 QAM signals. The Bit-Error Rate(BER) performance is evaluated under various optical transmission links including the effects of the dispersion and fiber nonlinearities such as SPM(Self-Phase Modulation) and XPM(cross-phase modulation). After simulation of SCM-WDM systems, the dominant factors determining the entire system performance are appeared to be the nonlinearity of MZ(Mach-Zehnder) modulator and the SCM channel spacing. The BER performance of subcarrier channels in the higher frequencies was degraded with the large dispersion effect only, however, the performance was improved a little with a combined effect of fiber dispersion and nonlinear effect when the hish fiber launching power was applied.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2479-2484
• /
• 2018

The filter bank multicarrier modulation (FBMC) technique is one of multicarrier modulation technique (MCM), which is mainly used to improve channel capacity of cognitive radio (CR) network and frequency spectrum access technique. The existing FBMC System contains serial to parallel converter, normal QAM modulation, Radix2 inverse FFT, parallel to serial converter and poly phase filter. It needs high area, delay and power consumption. To further reduce the area, delay and power of FBMC structure, a new clock gating technique is applied in the QAM modulation, radix2 multipath delay commutator (R2MDC) based inverse FFT and unified addition and subtraction (UAS) based FIR filter with parallel asynchronous self time adder (PASTA). The clock gating technique is mainly used to reduce the unwanted clock switching activity. The clock gating is nothing but clock signal of flip-flops is controlled by gate (i.e.) AND gate. Hence speed is high and power consumption is low. The comparison between existing QAM and proposed QAM with clock gating technique is carried out to analyze the results. Conversely, the proposed inverse R2MDC FFT with clock gating technique is compared with the existing radix2 inverse FFT. Also the comparison between existing poly phase filter and proposed UAS based FIR filter with PASTA adder is carried out to analyze the performance, area and power consumption individually. The proposed FBMC with clock gating technique offers low power and high speed than the existing FBMC structures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.741-744
• /
• 2001

In this study, a OFDM mode, unlike traditional single carrier mode, is that a great number of carrier in multi-channel environment is transmitted by modulating objective Data parallel in order to execute high speed Data translation and make frequency orthogonal to offer high spectrum efficiency. As a result, this method is adopted to a variety of fields and is being actively studied. In this papers, the efficiency of OFDM wireless-communication systems is evaluated by modulation methods through computer simulation. M-PSK and M-QAM are used as modulation methods. The simulation is executed in a real channel and a virtual channel included multi-path, AWGN, Peak Power clipping, Frame Start Time Error As a result of simulation, it is confirmed that M-QAM method is superior to M-PSK in OFDM systems in terms of the transmission methods.