• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.2
• /
• pp.131-139
• /
• 1984

The pyrolytic behavior of vanillin, a flavorant for manufactured cigarettes, was examined to find its contribution to the smoke composition. Vanillin was pyrolyzed at various temperatures (500-$900^{\circ}C$) in a stream of nitrogen. Pyrolytic products at $800^{\circ}C$ were identified with GC/MS. As increasing temperature, pyrolytic products did not appear with qualitative differences. Component analysis of the resulting products showed that 24 compounds were identified. and phenolic compounds were major products. The pyrolytic pathway of vanillin was also discussed.

• Environmental Mutagens and Carcinogens
• /
• v.7 no.2
• /
• pp.85-102
• /
• 1987

In spite of high incidences in gastrointestinal cancers in Korea, there have been few studies so far, which tried to detect or isolate the mutagenic, namely the carcinogenic substances in the Korean taste traditional foods. Among the many plausible dietary sources of carcinogens, the pyrolytic products of proteins or amino acids would be the major ones. And it is more noteworthy that the food pattern analysis showed the increasing consumption of protein foods by Korean as pyrolytic products, such as Bulgogi and Kalbi, etc.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.540-544
• /
• 2008

Pyrolytic characteristics of mixed plastics containing 22 wt.% HDPE, 17 wt.% LDPE, 27 wt.% PP, 12 wt.% PS, 16 wt.% ABS, 6 wt.% PVC have been studied in the batch-type microreactor of stainless steel. Thermal degradation experiments were performed at temperature of $410{\sim}450^{\circ}C$. The yield of each pyrolytic products were obtained by the weight measurement and molecular weight distribution of pyrolytic liquid products determined by the GC-SIMDIS method. It was shown that the yield and molecular weight of pyrolytic liquid product were decreased with the increase of reaction temperature and time. It was know that 20wt% of PVC composing of the mixed plastics was converted to the gas products of chloride during the pyrolysis process. The chain-end scission rate parameter was determined to be 50.2 kcal/mole of mixed plastics by the Arrhenius plot.

• Journal of the Korean Society of Tobacco Science
• /
• v.8 no.2
• /
• pp.59-66
• /
• 1986

The Pyrolytic behavior of glycyrrhizic acid and glycyrrhetini c acid, which are natural flavorants for manufactured cigarettes was observed to find its contribution to the smoke composition. Pyrolyzates of them at 800t were identified using a gas chromatography and a mass spectrometer. According to the analysis of the pyrolytic Products, 43 different compounds were identified Among them the aromatic hydrocarbon compounds were found to be the major products.

• Journal of the Korean Society of Tobacco Science
• /
• v.9 no.1
• /
• pp.57-64
• /
• 1987

The pyrolysis of geometrical isomers of 9-octadecenoic acid were conducted at $600^{\circ}C$ under nitrogen, and its pyrolytic behaviors were investigated. The pyrolytic products of both fatty acids, cis-9-octadecenoic acid(oleic acid) and trans-9-octadecenoic acid(elaidic acid), were analyzed using a gas chromatograph and GC/MS spectrometer. Twenty-seven different compounds were identified from these pyrolyzates, and the chief products of them were ketones, alcohols and aromatic hydrocarbons. And also, the pyrolytic mechanisms of two geometrical isomers of this fatty acid were discussed by a comparison of experimental results.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.86-94
• /
• 2011

Pyrolytic lignin was obtained from biooil produced with yellow poplar wood. Fast pyrolysis was performed under various temperature ranges and residence times using fluidized bed type reactor. Several analytical methods were adopted to characterize the structure of pyrolytic lignin as well as the effect of pyrolysis temperature and residence time on the modification of the lignin. The yield of pyrolytic lignin increased as increasing pyrolysis temperature and decreasing residence time of pyrolysis products. The molecular weight of pyrolytic lignin determined by gel permeation chromatography (GPC) was approximately 1,200 mol/g, which was approximately a tenth of milled wood lignin (MWL) purified from the same woody biomass. Based on analytical data, demethoxylation and side chain cleavage reaction were dominantly occurred during fast pyrolysis.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.09a
• /
• pp.15-32
• /
• 2006

Biomass had been attracted public attention as eco-friendly resource which not increases the greenhouse gas like carbon dioxide. In this study, it had been collected pyrolytic products such as bio-oil, char and pyrolytic gas from various biomass in a fluidized bed reactor which is one of the fast pyrolysis processes. To understand the characteristics of biomass pyrolysis, the variation of products yield and chemical composition was determined with various operating parameters like temperature, gas velocity($U_{0}/U_{mf}$) and bed height(L/D). In the optimum operating conditions, gas yield and water content was the lowest and concentration of guaiacols and syringols were the highest. The maximum yields of bio-oil was from 55% to 58% at $400^{\circ}C$.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.257-262
• /
• 2020

Vehicle wiper blades are typically treated with chlorine to lower their friction coefficient with the windshield surface. In this study, a chlorinated, natural rubber (NR) vehicle wiper blade was characterized using a pyrolytic technique. Unchlorinated and chlorinated wiper blades were pyrolyzed and the pyrolysis products were analyzed using gas chromatography/mass spectrometry (GC/MS). Besides isoprene and dipentene, the other principal pyrolysis products such as 1,5,8-p-menthatriene (MTT) and p,α-dimethylstyrene (DMS) were observed. The MTT and DMS ratios did not vary for the chlorinated nor unchlorinated samples when the entire rubber lip of the wiper blade was pyrolyzed. However, when only the lip surface of the wiper blade rubber was pyrolyzed (via scratching with a knife) the relative ratios of the chlorinated sample were much greater than those of the unchlorinated sample. As MTT is produced from the conjugated backbone of chlorinated NR that forms through HCl elimination during initial pyrolysis, and DMS is generated by the dehydrogenation of MTT, these two products could be used as markers for detecting chlorinated NR.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.8-15
• /
• 1997

This study was carried out to present a analysis of pyrolytic degradation of 4-hydroxy-3-methoxybenzal dehyde(vanillin) pyrolyzed at $330^{\circ}C{\sim}920^{\circ}C$ by Curie-point pyrolyzer connected with GC/MSD by on-line system. Identified by GC/MSD were 100 pyrolytic products of vanillin. The pyrolysis of the compound gave benzene, phenol, 1,3-cyclopentadiene, methyl benzene, benzaldehyde, benzofuran, and cresol as major products, which were produced by pyrolytic degradation and synthesis of vanillin radicals.

• Journal of Forest and Environmental Science
• /
• v.36 no.3
• /
• pp.219-224
• /
• 2020

Urea formaldehyde resins are widely used in the manufacturing of wood composite and their usage is always combined with release of formaldehyde characterized to be hazardous to health during and after the manufacturing of the products. This study investigates the effectiveness of wood-based adhesive from oil of pyrolysed Triplochiton scleroxylon sawdust for the production of composite board. The wood-derived Pyrolytic Oil (PyO) was blended with Urea Formaldehyde (UF) resin to formed Pyrolytic Oil-Urea Formaldehyde (PyOUF). The obtained PyOUF called Wood-Based Adhesives at four blends and control (UF) viz; 1:1, 1:2, 1:3, 2:1, 1:3 were further employed to prepare the composite board and test for their bonding strength by physical (water absorption-WA and thickness swelling-Th.S) and mechanical properties (modulus of elasticity-MOE, modulus of rupture-MOR, and impact bending-IB). Data obtained was analysed using analysis of variance at α 0.05. The result of analysis of variance conducted on physical properties show significant difference (p≤0.05) between the WA values obtained when testing the different blending proportion of PyOUF and likewise between 2 and 24 h of immersion. PyOUF had significant effect (p≤0.05) on Th. S for 24 h but no significant different (p>0.05) for the 2 h period of soaking. The analysis of variance on mechanical properties of the composite board (MOE, MOR, and IB) show significance differences (p≤0.05) between the strength values obtained when testing the different ratios of PyO with UF. PyO content influenced the properties of the boards and it is evident that PyO can be used in the manufacture of composite board.