• 대한화학회지
• /
• 제41권10호
• /
• pp.524-534
• /
• 1997

고무가황체는 고분자인 천연고무 및 합성고무에 여러 가지 유기첨가제를 배합하여 만든다. 이와 같은 배합고무의 분석은 여러 가지 다른 성질을 갖는 다양한 첨가제들로 인하여 많은 전처리 과정을 거쳐야 하므로 그 분석이 용이하지 않다. 이를 극복하기 위하여 열분해 가스크로마토그래피질량분석법(Pyrolysis Gas Chromatography-Mass Spectrometry)을 이용하여 고무가황체 중의 유기 고무약품들의 직접분석을 시도하였다. 점착제인 쿠마론-인덴수지(coumarone-indene resin $C-90^{TM}$), 접착제인 알킬페놀 레조시놀 포름알데히드 수지, 가류지연제 등의 고무첨가제의 열분해과정 및 열분해체들의 질량스펙트럼들을 확인하였고 이를 통하여 복잡한 구성 성분으로 이루어진 가황고무 중에서 이들 배합제의 직접분석이 가능하였다.

• Environmental Engineering Research
• /
• 제23권4호
• /
• pp.390-396
• /
• 2018

This study investigated the transformation of dissolved organic matter (DOM) in a free-water surface flow constructed wetland. Pyrolysis gas chromatography-mass spectrometry (Py-GC/MS) coupled with preparative high-performance liquid chromatography (prep-HPLC) was used to analyze the compositions of biopolymers (polysaccharides, amino sugars, proteins, polyhydroxy aromatics, lipids and lignin) in DOM according to the molecular size at three sampling points of the water flow: inflow, midflow, and outflow. The prep-HPLC results verified the decomposition of DOM through the decrease in the number of peaks from three to one in the chromatograms of the sampling points. The Py-GC/MS results for the degradable peaks indicated that biopolymers relating to polysaccharides and proteins gradually biodegraded with the water flow. On the other hand, the recalcitrant organic fraction (the remaining peak) in the outflow showed a relatively high concentration of aromatic compounds. Therefore, the ecological processes in the constructed wetland caused DOM to become more aromatic and homogeneous. This indicated that the constructed wetland can be an effective buffer area for releasing biochemically stable DOM, which has less influence on biological water quality indicators, e.g., biochemical oxygen demand, into an aquatic ecosystem.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.188-196
• /
• 2022

Styrene-butadiene rubber(SBR) is a copolymer of styrene and butadiene. It is composed of 1,2-unit, 1,4-unit, and styrene, and its properties are dependent on its microstructure. In general, rubber composites contain a single rubber or a blended rubber. Similarly, SBR is used by mixing with natural rubber(NR) and butadiene rubber(BR). The composition of a rubber article affects its physical and chemical properties. Herein, an analytical method for determining the microstructure of SBR using via pyrolysis is introduced. Pyrolysis-gas chromatography/mass spectrometry is widely used to analyze the microstructure of polymeric materials. The microstructure of SBR can be determined by analyzing the principal pyrolysis products formed from SBR, such as 4-vinylcyclohexene, styrene, 2-phenylpropene, 3-phenylcyclopentene, and 4-phenylcyclohexene. An analytical method for determining the composition of SBR/NR, SBR/BR, and SBR/NR/BR blends via pyrolysis is introduced. The composition of blended rubber can be determined by analyzing the principal pyrolysis products formed from each rubber component.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.38-42
• /
• 2006

When whole cells are subjected to pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) analysis, it provides biochemical profiles containing overlapping signals of the majority of compounds. To determine marker compounds that discriminate embryogenic calluses from nonembryogenic calluses, samples of embryogenic and nonembryogenic calluses of five higher plant species were subjected to Py-GC/MS. Genetic programming of Py-GC/MS data was able to discriminate embryogenic calluses from nonembryogenic calluses. The content ratio of 5-meyhyl-2-furancarboxaldehyde and 5-(hydroxymethyl)-2-furancarboxaldehyde was greater in nonembryogenic calluses than in embryogenic calluses. However, the content ratio of phenol, p-cresol, and $^1H-indole$ in embryogenic calluses was 1.2 to 2.4 times greater than the ratio in nonembryogenic calluses. These pyrolysates seem to be derived from the components of the cell walls, which suggests that differences in cell wall components or changes in the architecture of the cell wall playa crucial role in determining the embryogenic competence of calluses.

• 대한화학회지
• /
• 제7권2호
• /
• pp.106-114
• /
• 1963

The products from polymer pyrolysis at $450^{\circ}$ are cooled with ice, then liquid and gaseous portions are analysed by gas chromatography. Di-2-ethyl hexyl sebacate column, silicone oil column, silica gel column and tetraethyleneglycol dimethylether column, which was most effective for the separation of hydrocarbon gases, are used. Identification of isomers could be secured more effectively by gas chromatography than mass spectrometry. Elucidation of the mechanism for thermal decomposition of polymers could be done through the identification of pyrolysis products. Although more extensive work is needed, some patterns of polymer pyrolysis are discussed.

• 한국축산식품학회지
• /
• 제21권3호
• /
• pp.256-264
• /
• 2001

Pyrolysis/GC-mass spectrometry(Hewlet-Packard 5890GC/mass selective detector, 5971 BMSD), interfaced to a CDS Pyroprobe 1500 was optimized for rapid analysis of flavour compounds in Cheddar cheese. Twenty flavour compounds, including aldehydes(4), ketones(4), fatty acids(10), alcohol(1), and hydrocarbon(1), were identified from Cheddar cheeses. In total, Twenty-three flavour compounds aldehydes(2), ketones(8), alcohols(3), fatty acids(7), lactone(1), benzene derivative(1) and amide(1) were identified from two samples of accelerated-ripened Cheddar cheese treated with the proteolytic enzymes of Lactobacillus casei LGY. In total, Twenty-one flavour compounds; aldehydes(2), ketones(5), alcohols(2), fatty acids(11), and lactone(1) were identified from enzyme-modified cheese(EMC) treated with the combination of the proteolytic enzymes of Lactobacillus casei LGY and commercial endopeptidase or lipase. However, All the flavour compounds identified by pyrolysis/GC/MS in samples of ARC and EMC were not determined whether they are recognized as typical Cheddar flavour or not. More studies were requested on the development of methods for a rapid and convienent analysis of dairy fermented products using pyrolysis/GC-mass spectrometry.

• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.164-169
• /
• 1998

Vulcanized rubber containing three kinds of oligomeric resins such as cashew resin, t-octylphenol formaldehyde resin and terpene modified wood rosin has been characterized by simultaneous pyrolysis methylation-gas chromatography/mass spectrometry (SPM-GC/MS). After methylation by the SPM method using tetramethylammonium hydroxide, the methylated pyrolyzates of the corresponding resins were detected with higher sensitivity than underivatized pyrolyzates without any interferences from other ingredients of vulcanized rubber.

• 한국환경과학회지
• /
• 제11권4호
• /
• pp.375-382
• /
• 2002

The total hydrocarbon distribution of oil products obtained from the pyrolysis of four kinds of mixtures of polyethylene-polystyrene waste has been studied by multidimensional chromatography(high performance liquid chromatography followed by capillary gas chromatography)/mass spectrometry. Saturated, unsaturated and aromatic hydrocarbons in oil products were selectively pre-separated according to structural groups by HPLC and the weight fraction of each group was estimated by analysis of each component using GC-FID response factors. The hydrocarbon distribution of aliphatic fraction consists of $C_{5}$ to $C_{25}$ saturated and unsaturated hydrocarbons. And that of aromatics fraction consists of benzene, toluene, xylene, styrene, propenyl benzene, naphthalene, and some of derivatives. Pyrolysis temperature did not affect the ratio of total weight fraction of aliphatic over aromatic hydrocarbon distribution in case of PS only and PE-PS mixtures (1:1 and 1:4 wt. ratio) as a feed while affected the ratio of total wt. fraction in case of PE only. The optimal temperature for the maximum oil production was $600^{\circ}C$ for pyrolysis of PS and 1:1 and 1:4 mixtures of PE and PS. The optimal condition for aromatic recovery was $600^{\circ}C$ with 1:1 mixture of PE and PS. In this condition, aromatic was produced up to 90% of total oil product. The maximum yield of toluene, xylene, styrene, and propenyl benzene were 8.6, 8.9, 51.0 and 7.4% of feed for pyrolysis PS at $700^{\circ}C$, respectively. However, only 1.3% naphthalene was recovered at $700^{\circ}C$ with 1:1 PE:PS(by wt.).

• 분석과학
• /
• 제8권4호
• /
• pp.821-827
• /
• 1995

Polychlorodibenzo-p-dioxins(PCDDs) have been prepared by microsacale pyrolysis of trichlorophenates. During the pyrolysis reaction, dechlorinated dibenzo-p-dioxins were also formed by the thermolysis of PCDDs. The dechlorination pathways of PCDDs were suggested in this reaction. The identification of these products was performed using capillary column gas chromatography-mass spectrometry.

• 청정기술
• /
• 제16권1호
• /
• pp.26-32
• /
• 2010

폴리프로필렌-폴리스타이렌 혼합물의 열분해에 대한 시너지효과를 조사하기 위하여 폴리프로필렌(PP)과 폴리스타이렌(PS) 및 PP-PS혼합물의 저온열분해를 회분식 반응기를 이용하여 상압 및 $450^{\circ}C$에서 실행하였다. 열분해 시간은 20~80분까지 하였고 열분해로 생성된 성분은 지식경제부에서 고시한 증류성상온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하였다. GC/MS(Gas chromatography/Mass spectrometry)에 의한 생성오일의 성분 분석은 PP-PS 혼합에 의해서 새로운 성분이 검출되지 않았음을 보여주었다. PP-PS 혼합물의 열분해 생성물의 분석결과, 혼합에 따른 시너지효과 또한 나타나지 않았다. PP-PS 혼합물의 중유수율을 제외한 각 생성물의 수율은 시료의 혼합비율에 비례하였다. 중유수율은 혼합비에 관계없이 거의 일정하게 나타났다.