• Journal of the Korean Applied Science and Technology
• /
• v.18 no.2
• /
• pp.118-126
• /
• 2001

Micelle formation and adsorption at the $Ti0_{2}$ interface of a series of polystyrene-polythylene oxide(PS-PEO) block copolymer in aqueous solution was studied using fluorescence probing and small-angle X-ray methods. Further, the stability of aqueous $Ti0_{2}$ dispersion in the presence of copolymer was investigated by microelectrophoresis, optical density and sedimentation measurements. The dissolution of pyrene as fluorescent probe in aqueous surfactant solution leads to a slow decrease of the $I_{1}/I_{3}$ ratio, as the copolymer concentration increase; $I_{1}$ and $I_{3}$ are respectively the intensities of the first and third vibrionic peaks in the pyrene fluorescence emission. The behaviour was due to the characteristics of the copolymers and/or to the copolymer association efficiency in water. Moreover, the adsorption at the plateau level increases with decreasing PEO until chain length. The zeta potential of $TiO_{2}$ particles decreases with increasing copolymer concentration and reaches a plateau value. Finally, stabilization using block copolymers was more effective with samples having higher weight fractions of PS block.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.199-207
• /
• 2001

In the present study the cure behavior of diglycidyl ether of bisphenol-A(DGEBA) using an anhydride-based hardener in the presence of N,N-dimethyl benzyl amine (BDMA) or 1-cyanoethyl-2-ethyl-4-methyl imidazole (2E4MZ-CN) as an accelerator has been monitored and interpreted from the viewpoint of photophysical properties by means of fluorescence spectroscopy. To do this, 1,3-bis-(1-pyrene)propane (BPP) was well incorporated in the epoxy resin system by mechanical blending. The BPP probe, which is very sensitive to conformational change of the molecule influenced by the surrounding medium, successfully formed intramolecular excimer fluorescence. It is susceptible to the micro-viscosity or local viscosity and molecular mobility according to the epoxy cure. The cure behavior was explained with monomer fluorescence intensity ($I_{M}$ ), excimer fluorescence intensity ($I_{E}$ ) and $I_{M}$ /$I_{E}$ ratio as a function of cure time, cure temperature and accelerator. The present work agreed with the previous report on the cure behavior of an epoxy-anhydride system studied using DSC or torsion pendulum method. This study also suggests that the use of fluorescence technique may provide information on cure behavior of a thermosetting resin in a low temperature region, which has not been well interpreted by other analytical methods.

• Journal of Environmental Science International
• /
• v.29 no.2
• /
• pp.201-207
• /
• 2020

A new chemosensor based on a self-assembled system has been devised to detect Hg²⁺ions efficiently. We demonstrated that the amphiphilic building blocks consisting of pyrene and boronic acid (1) aggregate in aqueous solutions and provide an outstanding sensing platform for sensitive detection. The self-assembled 1 exhibited high selectivity and sensitivity for Hg²⁺ion detection via fluorescence quenching, where the Hg²⁺ion detection ensued from a fast transmetallation of 1. The Stern-Volmer (SV) quenching constant for its fluorescence quenching by Hg²⁺ions was approximately 1.58 × 10⁸ M^-1. In addition, self-assembled 1 exhibited excellent sensing abilities at nano-molar concentration levels when tap water and freshwater samples were contaminated with of Hg²⁺ ions.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.10
• /
• pp.1054-1059
• /
• 1998

Fluorescence and dynamic light scattering measurements were applied to the study of formation and structure of aggregated colloidal particles in modified poly(ethylene-co-methylacrylate) ionomers in aqueous solution. Both 8-anillino-l-naphthalene-sulfonic acid (ANS) and pyrene were used as fluorescence probe to obtain the information on the structure of particle surface and inside, respectively. Three different ionomers used in this study started to aggregate at very dilute concentration, 3-8 x 10-6 g/mL. In this study, we demonstrate that the polyethylene ionomers can form stable nanoparticles. The hydrophobic core made of the polyethylene backbone chains is stabilized by the ionic groups on the particle surface. Such a formed stable nanoparticles have a relatively narrow size distribution with an average radius in the range of 27-48 nm, depending on the kind of ionic groups. Once the stable particles are formed, the particle size distributions were nearly constant. This study shows another way to prepare surfactant-free polyethylene nanoparticles.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.537-541
• /
• 2005

Estimation of concentrations of PAHs [benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, indeno(1,2,3-c,d)pyrene] in cereals, pulses, potatoes, and their products available in Korean markets gave mean levels of 0.13, 0.08, 0.06, 0.03, 0.08, 0.15, 0.45, and $0.14{\mu}g/kg$, respectively, with recoveries between 82.6-106.6%. Methodology involved saponification and extraction with n-hexane, purification on Sep-Pak Florisil cartridges, and high performance liquid chromatography using a fluorescence detector.

• Analytical Science and Technology
• /
• v.18 no.5
• /
• pp.403-409
• /
• 2005

Polycyclic Aromatic Hydrocarbons(PAHs) contamination arises from several sources including processing of food(smoking, direct drying, cooking) and environmental contamination of air, water, or soil, the later being considered as the most important. In this study, to establish the analytical method for some PAHs[benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, indeno(1,2,3-c,d)pyrene] in fish, alkali digestion time, extraction solvents, elution volume of florisil cartridge for clean-up have been optimized. The methodology involved saponification and extraction with n-hexane, clean-up on Sep-Pak florisil cartridges and determination by HPLC/FLD(High Performance Liquid Chromatography/Fluorescence Detector). Overall method recoveries for 8 PAHs spiked into these products ranged from 90 to 106%.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.688-691
• /
• 2004

Concentrations of PAHs [benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, indeno(1,2,3-c,d)pyrene] in vegetable oils and fats available in Korean market were estimated. Involved methodology were liquid-liquid partition, purification on Sep-Pak Florisil Cartridges, and high performance liquid chromatography using fluorescence detector. Overall recoveries for eight PAHs spiked into vegetable oils and fats ranged from 68.2 to 101.5%, averaging 85.4%. Mean levels of benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, and indeno(1,2,3-c,d)pyrene in vegetable oils and fats were 0.53, 0.82, 0.50, 0.18, 0.35, 0.16, 0.31, and $0.44{\mu}g/kg$, respectively.

• Journal of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.212-220
• /
• 1976

The photocyclization of 1,1'-dicycloalkenyls (1,1'-dicyclohexenyl, 1,1'-dicyclopentenyl, 1,1'-dicycloheptenyl and 1,1'-dicyclooctenyl) is studied. Irradiation at liquid nitrogen temperature does not show trans double bond band in IR spectra. Even though naphthalene and pyrene fluorescence are quenched very efficiently by 1, 1'-dicycloalkenyls, no or trace amount of cyclobutenes are accompanied. When acetophenone or benzophenone is used, cyclobutene is obtained only from 1,1'-dicyclohexenyls, 1,1'-dicycloheptenyl giving some adducts. Naphthalene and pyrene sensitizes adduct formation but not cyclization. From above observations, it is concluded that photocyclization occurs from the planar s-cis triplet state rather than twisted triplet, singlet excited state or vibrationally excited ground state in sensitized photocyclization of 1,1'-dicycloalkenyls.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1093-1096
• /
• 2009

Two new chemosensors 1 and 2 derived from 5,12- and 5,7-dioxocyclams were prepared and their signaling behaviors toward transition metal ions were investigated. Chemosensors 1 and 2 showed very efficient responses toward $Cu_{2+}$ and $Hg_{2+}$ ions. Ratiometric analysis of the fluorescence changes in pyrene monomer and excimer emissions clearly demonstrated the $Cu_{2+}$- and $Hg_{2+}$-selective signaling behavior. The signaling mechanism of the chemosensors is due to conformation changes upon complexation with metal ions and the inherent quenching nature of the complexed $Cu_{2+}$ and $Hg_{2+}$ ions themselves.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.811-815
• /
• 2007

A series of bispyrenyl-polyether have been synthesized and investigated as a fluorescent chemosensor for metal ions. The results showed that bispyrenyl-polyether system is selective towards Al3+ ion over other ions tested. In free ligand, excited at 343 nm, it displays a strong excimer emission at around 475 nm with a weak monomer emission at 375 nm. A ratiometry of monomer (375 nm) increase and excimer (475 nm) quenching was shown only when Al3+ ion is bound to ligand, because two facing pyrene groups form a less efficient overlap of π?π stacking compared with that of free ligand.