• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.297-305
• /
• 2005

In this paper, we study irregular 3D-Arrays with pyramid shapes. Some computation using Maple software and C++ language have been carried out to illustrate some novel and interesting patterns of numbers in these arrays.

• 한국통신학회논문지
• /
• 제38A권1호
• /
• pp.1-9
• /
• 2013

본 논문에서는 CS-LBP (Center-Symmetric Local Binary Pattern) 특징과 공간 피라미드를 이용한 BoF (Bag of Features)를 생성하고 이를 랜덤 포레스트(Random Forest) 분류기에 적용하여 인간의 행동을 인식하는 알고리즘을 제안한다. BoF를 생성하기 위해 영상을 균일한 패치로 나누고, 각 패치 마다 CS-LBP 특징을 추출한다. 행동 분류 성능을 향상시키기 위해 패치들마다 추출한 특징벡터들에 대해 K-mean 클러스터링을 적용하여 코드 북을 생성한다. 본 논문에서는 영상의 지역적인 특성을 고려하기 위해 공간 피라미드 방법을 적용하고 각 공간 레벨에서 추출된 BoF에 대해 가중치를 적용하여 최종적으로 하나의 특징 벡터로 결합한다. 행동 분류를 위해 결정트리의 앙상블로 이루어진 랜덤 포레스트는 학습 단계에서 각 행동 클래스를 위한 분류 모델을 만든다. 가중 BoF가 적용된 랜덤 포레스트는 다양한 인간 행동 영상을 포함하고 있는 Standford Actions 40 데이터를 성공적으로 분류하였다. 또한 기존 방법에 비해 분류 성능이 유사하거나 우수하며, 한 장의 영상에 대해 빠른 인식속도를 보였다.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.95-101
• /
• 2022

This paper proposes a method to process the shape of an optical transmission road and attempts to determine the most suitable single processing method for an acrylic plate optical transmission road. In addition, by manufacturing an automatic pattern processing device to generate certain shapes on the acrylic plate at regular intervals, and measuring the illuminance of the patterned acrylic plate optical transmission road, the measured illuminance was confirmed to fall under the KS illuminance values presented in Table 1. In conclusion, when an incident light of approximately 20,000 lx is applied, the transmission illumination is approximately 200 lx, which represents a transmission rate of approximately 1% for incident light and corresponds to the KS illumination criterion F. Additionally, the right-angle triangular pyramid base size (A) processed at a temperature of 350 ℃ for one second was 2 mm, exhibiting the largest transmission illumination of 280 lx. When the transparent acrylic plate was set to a constant size of 1.6 mm at the bottom of the right-angle triangular pyramid, the fastest response occurred at a processing tip temperature of 350 ℃ (0.04 s). On the other hand, it took 10 s to process the size of the bottom of the right-angled triangular pyramid at a temperature of 200 ℃ to 1.6 mm, and it was confirmed that the optical transmission efficiency was significantly reduced because of the burr that occurred at this time.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.772-776
• /
• 2014

We report a numerical analysis of the light-extraction efficiency (LEE) of light-emitting diodes (LEDs) on patterned sapphire substrates (PSSs). We considered various n-sided, regular convex pyramids, where n is an integer and $n{\geq}3$. We then considered four cross sections: extruded, subtracted, truncated-extruded, and truncated-subtracted. Ray-tracing simulations were carried out with these polygonal pyramid patterns, and the dimensions of the patterns were systematically varied. Optimized pattern shapes were determined for large LEE. An extruded circular pyramid with a slant angle of $45^{\circ}$ was found to be the optimal patterned shape.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.218-223
• /
• 2009

The micro pattern machining on the surface of wide mold is not easy to be simulated by conventional software. In this paper, a software is developed for micro pattern cutting simulation. The 3d geometry of v-groove, rectangular groove, pyramid and pillar patterns are visualized by C++ and OpenGL library. The micro cutting force is also simulated for each pattern.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.841-845
• /
• 2013

We give a textured front on silicon wafer for high-efficiency solar cells by using micro contact printing method which uses PDMS (polydimethylsiloxane) silicon rubber as a stamp and SAM (self assembled monolayer)s as an ink. A random pyramidal texturing have been widely used for a front-surface texturing in low cost manufacturing line although the cell with random pyramids on front surface shows relatively low efficiency than the cell with inverted pyramids patterned by normal optical lithography. In the past two decades, the micro contact printing has been intensively studied in nano technology field for high resolution patterns on silicon wafer. However, this promising printing technique has surprisingly never applied so far to silicon based solar cell industry despite their simplicity of process and attractive aspects in terms of cost competitiveness. We employ a MHA (16-mercaptohexadecanoic acid) as an ink for Au deposited $SiO_2/Si$ substrate. The $SiO_2$ pattern which is same as the pattern printed by SAM ink on Au surface and later acts as a hard resist for anisotropic silicon etching was made by HF solution, and then inverted pyramidal pattern is formed after anisotropic wet etching. We compare three textured surface with different morphology (random texture, random pyramids and inverted pyramids) and then different geometry of inverted pyramid arrays in terms of reflectivity.

• 한국광학회지
• /
• 제21권3호
• /
• pp.97-102
• /
• 2010

전산모사를 통하여 LGP 출력 분포를 조절할 수 있는 패턴 밀도 함수를 찾고 그 효과를 조사하였다. 패턴 밀도 함수, 즉 패턴 간격은 [Pexp(-y/70)+Qexp(+y/25)]R로 조사되었다. 이 함수를 이용하여 패턴의 간격을 조절하는 방식으로 반구형 패턴이 장착된 도광판을 설계하여 도광판 출력 분포를 분석한 결과 출력 분포가 등간격 패턴에 의한 출력 분포에 비하여 확연히 개선되는 것을 확인하였다. 또한 이 함수를 피라미드 패턴에 적용하여 도광판의 출력을 조사하였는데, 반구형 패턴의 경우와 마찬가지로 출력 분포가 개선되는 것을 확인하였다.

• 한국기계가공학회지
• /
• 제19권7호
• /
• pp.67-73
• /
• 2020

Shrinkage is inevitable in the curing of resins during the nanoimprint process. The degree of shrinkage that occurs as the resin transforms from a viscous liquid to solid differs depending on the type of resin. However, if the cured material is repeatedly cured using the same material, constant shrinkage can be confirmed. In this study, the pattern of change was observed by repeatedly performing the nanoimprint process using a resin with a constant shrinkage rate. The observed pattern for the change of shape was made using a triangular pyramid-shaped aluminum master mold and a flexible replica mold made from the master. Shrinkage that results from the nanoimprint process occurs linearly in the longitudinal direction of the pattern and can be predicted by simple calculations. The change of the pattern due to shrinkage occurred as expected. If the shrinkage rate remains constant, various patterns can be manufactured with high accuracy by correcting these changes before producing a specific shape. This study confirms that the pattern of the desired angle can be obtained by performing the repeated imprint without having to manufacture a master mold.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.295-299
• /
• 2006

The inner-structure bonded(ISB) sheet metal is defined as a composite sheet metal which has middle layer of truss-structure between two skin sheets. The characteristics such as ultra-light weight, high rigidity, high strength, etc are required especially for automobile parts. The characteristic of ISB sheet metal depends on inner-structure pattern or method of bonding. Pyramid type of crimped expanded metal is used for inner-structure and both of resistance welding and adhesive bonding are applied to make a specimen. As a result of compression test, it is appeared that forming limit is 10% reduction in thickness under a load of 8kgf per unit element(one inner-structure). In case of uniaxial tensile test the non-uniform surface integrity rather than the buckling of inner-structure happened at a load of 450kgf, which indicates elongation of 7.2% and thickness reduction of 13%. The eye-inspection method was applied to examine the defects occurring on the specimen during stretch forming. In case of biaxial stretch forming only the non-uniform deformation on the surface of a skin sheet could be observed. The forming limit in stretching of ISB sheet metal with the hemi-spherical punch of 150mm in diameter was 3mm in forming depth and 5% reduction in thickness.

• 대한의용생체공학회:의공학회지
• /
• 제12권2호
• /
• pp.99-106
• /
• 1991

For the automatic detection of pulmonary blood vessels, a new algorithm is proposed using the fact that human recognizes a pattern orderly according to their size. This method simulates the human recognition process by the pyramid images. For the detection of vessels using multilevel image, large and wtde ones are detected from the most compressed level, followed by the detection of small and narrow ones from the less compressed images with FCM(fuzzy c means) clustering algorithm which classifies similar data into a group. As the proposed algorithm detects blood vessels orderly according to their size, there is no need to consider the variation of parameters and the branch points which should be considered in other detection algirithms. In the detection of patterns whose size changes successively like pulmonary blood vessels, this proposed algorithm can be properly applied