• Journal of Fisheries and Marine Sciences Education
• /
• v.3 no.1
• /
• pp.27-34
• /
• 1991

History of the fisheries education in the secondary schools in Japan has began in 1901, and it greatly contributed to the development of fishing industry in Japan. Also this education system affected to her some neighboring countries. e.g. Korea, Taiwan, etc. According to the fundamental change of the education system after cease of the 2nd World War, fisheries middle schools were rearranged to fisheries high schools. and the activity of the graduates widely contributed to push up the total catch of fish in Japan to the first world rank since the 1970s. Nevertheless, the education in fisheries high schools is confronted to much problems, because of the rapid decrease of the man power who desires to work in the field of fisheries especially onboard fishing vessels in accordance with the rapid progress of industrialization and service economization. Such problems are taking place not only in Japan but also right now in Korea. To find out some countermeasure against the problems. the auther studied on the present status and the problems confronting in the education of fisheries high schools in Japan through some references. with heartful desires this study to be able to contribute to the sucessive development of the education on fisheries high schools and also the productivity of fisheries in Korea.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.171-178
• /
• 2008

This paper is concerned with the development of a measurement system using field measuring device which will give the membrane stress of the membrane structures. Up to this point, several techniques on measurement of membrane stresses has been proposed and some have been used in the fields, but accuracy of the measured stresses to be far from reliable one. Such situation has not been changed until recent days, we do not have the measurement device on which we can depend. On top of that, due to the different properties in cross directions for material of the membrane, the stress in the warp direction is different from that in the fill one. A new method is proposed to measured membrane stresses in two different direction separately, where instead of membrane stresses directly, an external force perpendicular to the membrane to be applied. A portable device can measure the applied force and the displacement. A special testing bed to be fabricated to accommodate $50cm{\times}50$ manbrane specimen which can apply 5 ton load in two orthogonal direction. A special device using push-pull gage was developed. To measure the membrane stresses in warp and fill direction separately, a different length of the tips are used. The measuring device which can called tension meter, can be calibrated on the testing bed, and optimized the length and shape of tip.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.109-118
• /
• 2004

No.2 PCM (Pickling and tandem cold rolling mill) at Pohang works was revamped in 2003. The purpose of this project is to produce carbon and stainless steel using conventional carbon production process, rolling and annealing. This paper introduces the applied facilities and technologies of PCM which are used in production of carbon and stainless steel. To realize the main purpose of this project, POSCO have developed laser weld technology in normal carbon and special steel (stainless, high carbon and high silicon). And this report describes the method which is developed to get down the surface defect of stainless 400 series. After revamping, No.2 PCM can have competitive power in this field and can supply the special steel using carbon rolling process.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.17-20
• /
• 2002

IMT-2000 technologies are divided 3G packet data system that using mobile IP and GPRS that based on the GSM networks. These technologies Push introduce mobile IP to support seamless roaming. In mobile If environments, use AAA server such as RADIUS or DIAMETER to provide authentication service for dial-up computers. This factor is important for mobile nodes. Mobile If require strong authentication between mobile nodes and home agents. We propose application of AAA protocols for smooth handoff mechanism in IMT-2000 environments.

• International Journal of Computer Science & Network Security
• /
• v.24 no.3
• /
• pp.83-92
• /
• 2024

It is a common observation that whenever any patient arrives at the front desk of a hospital, outpatient clinic, or other health-associated centers, they have to first queue up in a line and wait to fill in their registration form to get admitted. The long waiting time without any status updates is the most common complaint, worrying health officials. In this paper, UrNext, a location-aware mobile-based solution using Bluetooth low-energy (BLE) technology, is presented to solve the problem. Recently, a technology-oriented method has been gaining popularity in solving the healthcare sector's problems, namely the Internet of Things (IoT). The implementation of this solution could be explained through a simple example that when a patient arrives at a clinic for her consultation. There, instead of having to wait in long lines, she will be greeted automatically, receive a push notification telling her that she has been admitted along with an estimated waiting time for her consultation session. This will not only provide the patients with a sense of freedom but would also reduce uncertainty levels that are generally observed, thus saving both time and money. This work aimed to improve clinics' quality of services and organize queues and minimize waiting times in clinics, leading to patient comfortability and reducing the burden on nurses and receptionists. The results demonstrated that the presented system was successful in its performance and helped achieve high usability.

• Structural Engineering and Mechanics
• /
• v.71 no.4
• /
• pp.433-444
• /
• 2019

Shear studs are often used to connect steel girders and concrete deck to form a composite bridge system. The application of precast concrete deck to steel-concrete composite bridges can improve the strength of decks and reduce the shrinkage and creep effect on the long-term behavior of structures. How to ensure the connection between steel girders and concrete deck directly influences the composite behavior between steel girder and precast concrete deck as well as the behavior of the structure system. Compared with traditional multi-I girder systems, a twin-I girder composite bridge system is more simplified but may lead to additional requirements on the shear studs connecting steel girders and decks due to the larger girder spacing. Up to date, only very limited quantity of researches has been conducted regarding the behavior of shear studs on twin-I girder bridge systems. One convenient way for steel composite bridge system is to cast concrete deck in place with shear studs uniformly-distributed along the span direction. For steel composite bridge system using precast concrete deck, voids are included in the precast concrete deck segments, and they are casted with cast-in-place concrete after the concrete segments are erected. In this paper, several sets of push-out tests are conducted, which are used to investigate the heavier of shear studs within the voids in the precast concrete deck. The test data are analyzed and compared with those from finite element models. A simplified shear stud model is proposed using a beam element instead of solid elements. It is used in the finite element model analyses of the twin-I girder composite bridge system to relieve the computational efforts of the shear studs. Additionally, a parametric study is developed to find the effects of void size, void spacing, and shear stud diameter and spacing. Finally, the recommendations are given for the design of precast deck using void for twin I-girder bridge systems.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.53
• /
• pp.155-180
• /
• 2012

Korea has the plans to improve nation and corporate global competitiveness through reducing the logistics costs. Ministry of Knowledge Economy, as the government department of in charge of the plan, establish industrial logistics policies in 2002 and 2007 and it's about time to set up the third industrial logistics policy in 2012. There are new trends for the logistics environment in terms of environment-friendly logistics, logistics securities, win-win collaboration etc. This study propose some harmonious plans between logistic productivity and the new trends in the field of logistics. For the purpose of that, we have evaluated the second industrial logistics policy. We propose the vision and objectives of the new industrial logistics policy. The vision is entering the line of industrial logistics developed nations through the sustainable logistics innovation, and the objects are smart & green logistics, win-win collaboration, lead the new logistics trends etc. We also propose the set the system and rules to push promote the new plan. In addition, industrial logistics is the new terminology setting out use by Ministry of Knowledge Economy.

• Earthquakes and Structures
• /
• v.3 no.5
• /
• pp.675-694
• /
• 2012

The 2008 Iwate-Miyagi Nairiku earthquake ($M_w$ 6.9, $M_{jma}$ 7.2) occurred on 14 June 2008 in Japan. The amplification and asymmetric waveform of the vertical acceleration at the ground surface recorded by accelerometers at station IWTH25, situated 3 km from the source, were remarkable in two ways. First, the vertical acceleration was extremely large (PGA = 38.66 $m/s^2$ for the vertical component, PGA = 42.78 $m/s^2$ for the sum of the three components). Second, an unusual asymmetric waveform, which is too far above the zero acceleration axis, as well as large upward spikes were observed. Using a multidegree-of-freedom (MDF) system consisting of a one-dimensional continuum subjected to vertical acceleration recorded at a depth of 260 m below ground level, the present paper clarifies numerically that these singular phenomena in the surface vertical acceleration records occurred as a result of the jumping and collision of a layer in vertical motion. We herein propose a new mechanism for such jumping and collision of ground layers. The unexpected extensive landslides that occurred in the area around the epicenter are believed to have been produced by such jumping under the influence of vertical acceleration.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.315-319
• /
• 1996

We have developed a prototype patient monitoring system including module-based bedside units, interbed network, and central stations. A bedside unit consists of a color monitor and a main CPU unit with peripherals including a module controller. It can also include up to 3 module cases and 21 different modules. In addition to the 3-channel recorder module, six different physiological parameters of ECG, respiration, invasive blood pressure, noninvasive blood pressure, body temperature, and arterial pulse oximetry with plethysmogaph are provided as parameter modules. Modules and a module controller communicate with up to 1Mbps data rate through an intrabed network based on RS-485 and HDLC protocol. Bedside units can display up to 12 channels of waveforms with any related numeric informations simultaneously. At the same time, it communicates with other bedside units and central stations through interbed network based on 10Mbps Ethernet and TCP/IP protocol. Software far bedside units and central stations fully utilizes gaphical user interface techniques and all functions are controlled by a rotate/push button on bedside unit and a mouse on central station. The entire system satisfies the requirements of AAMI and ANSI standards in terms of electrical safety and performances. In order to accommodate more advanced data management capabilities such as 24-hour full disclosure, we are developing a relational database server dedicated to the patient monitoring system. We are also developing a clinical workstation with which physicians can review and examine the data from patients through various kinds of computer networks far diagnosis and report generation. Portable bedside units with LCD display and wired or wireless data communication capability will be developed in the near future. New parameter modules including cardiac output, capnograph, and other gas analysis functions will be added.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.4
• /
• pp.337-350
• /
• 2004

Because of a security problem and not enough IPv4 address space, the home network has been made up of private network, and it has been separated from Internet. This fact prevents people in Internet from controlling and monitoring home appliances. So, this paper designs and Implements the UPnP Proxy System which offers functions for users to control and monitor home appliances. When users are in the outside of the home network, they do not know which devices were connected in the home network because the advertisement messages of UPnP devices would not be delivered to the outside of the home network. Also, users cannot access devices directly, and their control messages are not delivered into the home network. So, this paper designs and implements the UPnP Proxy System to solve these problems. The merit of the system is that users can control and monitor home appliances in realtime using presentation web documents with the HTTP push technology.