• 경영정보학연구
• /
• 제21권4호
• /
• pp.99-123
• /
• 2019

지식 정보화 시대에 대표적인 고부가가치 산업으로서 소프트웨어 산업에 대한 중요성이 증대되고 있으며, 그 중에서도 오픈소스 소프트웨어는 소스코드 공개, 자유로운 수정과 배포, 공급업체에 대한 의존성 탈피, 비용 절감과 같은 이점을 바탕으로 빠르게 활동 영역을 확장해가고 있다. 특히, 오픈소스 소프트웨어는 클라우드, 사물인터넷, 인공지능, 빅데이터 등과 같은 새로운 정보기술과 접목하여 활용도가 높을 것으로 예상되고 소프트웨어의 신기술 발전을 주도할 수 있다는 점에서 다양한 긍정적인 효과를 얻을 수 있을 것으로 전망되고 있다. 글로벌 IT 기업들은 이러한 오픈소스 소프트웨어를 비즈니스 혁신을 위해 적극적으로 활용하고 있으며 국내에서도 오픈소스 소프트웨어를 활성화하기 위한 관련정책과 기업들의 노력이 이어지고 있다. 오픈소스 소프트웨어가 주목 받음에 따라 이와 관련된 연구도 활발하게 진행되고 있으나 조직들이 어떠한 이유로 기존의 비공개 소프트웨어에서 오픈소스 소프트웨어로 전환하게 되는가에 하는 연구는 미비한 실정이다. 이에 본 연구는 인간의 이주행동을 설명하는데 유용한 이론적 틀로 알려진 Push-Pull-Mooring 프레임워크를 기반으로 오픈소스 소프트웨어로의 전환에 영향을 미치는 요인들을 제안하고 그 관계를 실증분석을 통해 확인하고자 하였다. 이를 위해 관련 기업에서 수집된 총 268부를 바탕으로 본 연구에서 제안한 연구모형의 가설을 검증하였다. 연구결과, push 요소인 지속적 유지비용, 벤더 의존성, 기능적 무차별성, SW 자원의 비효율성, 그리고 pull 요소인 네트워크 기반지원, 시험 가능성, 전략적 유연성이 오픈소스 소프트웨어 전환에 유의미한 영향을 미치는 것으로 나타났지만, 지식수준향상은 유의 하지 않은 것으로 판명 되었다. 또한, Mooring 효과로 관리자의 SW 경쟁력 확보의지는 push와 pull요소 중 지식수준향상과 OSS 전환 관계를 제외한 모든 관계를 강화시키는 것으로 나타났다. 본 연구의 결과는 오픈소스 소프트웨어에 대한 연구를 확장할 수 있는 기반을 제공하고 관련 기업들에게 OSS로의 전환에 대한 유용한 정보를 제공할 수 있을 것이다.

• Steel and Composite Structures
• /
• 제25권1호
• /
• pp.79-92
• /
• 2017

Initial damage to a stud due to corrosion, fatigue, unexpected overloading, a weld defect or other factors could degrade the shear capacity of the stud. Based on typical push-out tests, a FEM model and theoretical formulations were proposed in this study. Six specimens with the same geometric dimensions were tested to investigate the effect of the damage degree and location on the static behavior and shear capacity of stud shear connectors. The test results indicated that a reduction of up to 36.6% and 62.9% of the section area of the shank could result in a dropping rate of 7.9% and 57.2%, respectively, compared to the standard specimen shear capacity. Numerical analysis was performed to simulate the push-out test and validated against test results. A parametrical study was performed to further investigate the damage degree and location on the shear capacity of studs based on the proposed numerical model. It was demonstrated that the shear capacity was not sensitive to the damage degree when the damage section was located at 0.5d, where d is the shank diameter, from the stud root, even if the stud had a significant reduction in area. Finally, a theoretical formula with a reduction factor K was proposed to consider the reduction of the shear capacity due to the presence of initial damage. Calculating K was accomplished in two ways: a linear relationship and a square relationship with the damage degree corresponding to the shear capacity dominated by the section area and the nominal diameter of the damaged stud. This coefficient was applied using Eurocode 4, AASHTO LRFD (2014) and GB50017-2003 (2003) and compared with the test results found in the literature. It was found that the proposed method produced good predictions of the shear capacity of stud shear connectors with initial damage.

• 한국사회정책
• /
• 제19권2호
• /
• pp.69-97
• /
• 2012

이 연구는 중고령자의 근로여부와 근로시간 선호에 영향을 미치는 요인을 국가비교적 관점에서 경험적으로 분석하였으며, 특히 계층효과, 일에 대한 관점, 노동시장 구조의 배출효과와 사회보장제도 등의 유인요인 효과 등의 가설을 검증하기 위해 국제인식조사자료를 이용하여 18개국에 대한 다층분석을 수행하였다. 주요결과는 다음과 같다. 첫째, 계층과 관계없이 대다수의 고령자들이 일하기를 원하며, 따라서 대다수 중고령자의 비근로는 일을 하지 않으려는 자발적인 선택이 아닐 수 있는 가능성을 보여준다. 둘째, 55-64세 집단에 있어서는 계층이 높을수록 일을 계속할 가능성이 높은 계층간 불평등이 발견되었다. 셋째, 근로여부와 근로시간 선호는 사회보장제도의 관대성보다는 시간제 근로비중 등 고령자에게 적합한 유연한 일자리가 제공되느냐에 더 영향을 받음을 확인하였다. 결론적으로, 적어도 국가 비교적 관점에서 볼 때 고령자 근로의 핵심적인 문제는 노동공급측의 문제(즉 고령자의 근로의욕)라기보다는 노동수요측의 문제, 퇴직 유인의 문제보다는 일자리 상황과 구조의 문제라고 보여진다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.639-642
• /
• 2005

고객이 원하는 다양성을 확보하면서도 생산의 단순성을 유지 할 수 있다면 기업의 고유한 경쟁력이 될 수 있을 것이다. 본 연구에서는 현재 새로운 생산 패러다임으로 인정 받고 있는 Pull Postponement 에 관하여 개념에 대한 이해를 시작으로 성공을 위하여서는 무엇이 필요하고 어떻게 생산 시스템에서 활용 할 수 있는가를 사례를 이용하여 분석, 연구하고자 한다.

• 한국의류학회지
• /
• 제30권9_10호
• /
• pp.1455-1463
• /
• 2006

The purpose of this study was to examine the advertisement effects of mobile fashion advertisements, specifically focusing on how the mobile fashion advertisement effects work according to advertisement types and categories. Two hundred female college students participated in this study. For data analysis, descriptive statistics, factor analysis, and t-test were used for this study. As the results, first, advertisement attitudes were classed into three factors such as cognitive factor emotional factor, and behavioral factor. Second, regarding the effect of advertisement types, pull advertisement type had higher advertisement attitudes, and higher purchasing intention than push advertisement type. There was not significant in brand attitudes between pull advertisement and push advertisement. Third, for the effects of advertisement categories, clothing advertisement had higher cognitive factor and behavioral factor, and higher purchasing intention than accessory advertisement. There were not significant in emotional factor and brand attitude between clothing and accessory advertisements. Based on these results, M-commerce fashion advertisement marketing strategies would be suggested.

• Journal of Information Processing Systems
• /
• 제9권1호
• /
• pp.157-172
• /
• 2013

There are many recommendation systems available to provide users with personalized services. Among them, the most frequently used in electronic commerce is 'collaborative filtering', which is a technique that provides a process of filtering customer information for the preparation of profiles and making recommendations of products that are expected to be preferred by other users, based on such information profiles. Collaborative filtering systems, however, have in their nature both technical issues such as sparsity, scalability, and transparency, as well as security issues in the collection of the information that becomes the basis for preparation of the profiles. In this paper, we suggest a movie recommendation system, based on the selection of optimal personal propensity variables and the utilization of a secure collaborating filtering system, in order to provide a solution to such sparsity and scalability issues. At the same time, we adopt 'push attack' principles to deal with the security vulnerability of collaborative filtering systems. Furthermore, we assess the system's applicability by using the open database MovieLens, and present a personal propensity framework for improvement in the performance of recommender systems. We successfully come up with a movie recommendation system through the selection of optimal personalization factors and the embodiment of a safe collaborative filtering system.

• 기술혁신학회지
• /
• 제9권1호
• /
• pp.103-130
• /
• 2006

본 논문은 첨단 재료기술의 혁신유형을 분류하는 것이다. 기존의 혁신유형 분류에 관한 연구는 전 기술 혹은 전 산업에 포괄 적용하는 개념에서 접근하고 있어 산업기술별 혁신의 고유한 특수성이 기술혁신유형에 제대로 반영되지 못하고 있다. 이에, 본 논문에서는 첨단재료기술에 한정하여 기술혁신에 대한 이해를 증진하고 연구개발 및 정책수립의 기본 틀로 활용하는데 목적을 둔 4가지의 기술혁신 유형(공급재료혁신, 수요재료혁신, 공급공정혁신 및 수요공정혁신)을 제안하였다. 혁신유형의 도출과정은 첨단재료기술혁신의 특성, 원천, 과정 분석과 함께 사용자 산업과의 상호작용 분석에 근거하고 있다. 4가지 혁신 유형별로 특징과 사례분석을 통하여 연구개발 혹은 정책수립 등의 도구로서 활용가능성과 관련 시사점을 살펴보았다.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.735-751
• /
• 2014

In the previous paper, authors proposed the unified equivalent frame method (UEFM) for the lateral behavior analysis of the flat plate structure subjected to the combined gravity and lateral loads, in which the rotations of torsional members were distributed to the equivalent column and the equivalent slab according to the relative ratio of gravity and lateral loads. In this paper, the lateral behavior of the multi-span flat plate structures under various levels of combined gravity and lateral loads were analyzed by the proposed UEFM, which were compared with test results as well as those estimated by existing models. In addition, to consider the stiffness degradation of the flat plate system after cracking, the stiffness reduction factors for torsional members were derived from the test results of the interior and exterior slab-column connection specimens, based on which the simplified nonlinear push-over analysis method for flat plate structures was proposed. The simplified nonlinear analysis method provided good agreements with test results and is considered to be very useful for the practical design of the flat plate structures under the combined gravity and lateral loads.

• Restorative Dentistry and Endodontics
• /
• 제45권3호
• /
• pp.35.1-35.17
• /
• 2020

Epoxy resin-based sealers are currently widely used, and several studies have considered AH Plus to be the gold-standard sealer. However, it still has limitations, including possible mutagenicity, cytotoxicity, inflammatory response, and hydrophobicity. Drawing upon the advantages of mineral trioxide aggregate, calcium silicate-based sealers were introduced with high levels of biocompatibility and hydrophilicity. Because of the hydrophilic environment in root canals, water resorption and solubility of root canal sealers are important factors contributing to their stability. Sealers displaying lower microleakage and stronger push-out bond strength are also needed to endure the dynamic tooth environment. Although the physical properties of calcium silicate-based sealers meet International Organization for Standardization recommendations, and they have consistently reported to be biocompatible, they have not overcome conventional resin-based sealers in actual practice. Therefore, further studies aiming to improve the physical properties of calcium silicate-based sealers are needed.

• Steel and Composite Structures
• /
• 제38권4호
• /
• pp.399-414
• /
• 2021

This paper aims to verify the feasibility of rubber rings to mitigate the shear concentration in perfobond connector (PBL) groups. Firstly, modified push-out tests for five specimens with four holes were conducted to investigate the effects of rubber rings on the shear mechanism of PBL groups. The test results showed that by employing rubber rings on partial holes, more shear forces were distributed to the holes without rubber rings. The rubber rings significantly improved the slip ability of the specimens, and the ductility of PBL groups is dependent on the number and thickness of rubber rings. Subsequently, three-dimensional numerical models were established and validated by the experimental results. According to the plastic strain distribution in concrete dowels, the action principle of rubber rings in PBL groups was explained. Furthermore, the parametric study was conducted to investigate the influential factors on shear distributions, including the width of steel plates, the hole spacing, the number of holes, the rubber ring thickness, and the positions of rubber rings. The parametric analysis results showed that the redistribution of shear forces is significantly affected by the rubber rings with the smallest thickness. By properly employing rubber rings in PBL groups, the shear forces of holes are more even. Finally, an analytical model for PBL groups with rubber rings was proposed to predict the shear distribution at the serviceability stage.