• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.106-111
• /
• 2021

In this study, an ultrasound-assisted micellar extraction process was developed to efficiently purify the anticancer substance paclitaxel from the plant cell Taxus chinensis. The problem of many extraction steps and long phase separation time in the traditional micellar process could be dramatically improved. The highest paclitaxel yield (~96%, extracted twice) was obtained at 180 W of ultrasonic power and 1.5 h of ultrasonic irradiation time, which was 24.7% higher than that of the traditional method. In addition, the partition coefficient (K) showed a maximum value (24.0) at 180 W of ultrasonic power and 1.5 h of irradiation time. There was no significant difference in the purity of paclitaxel, and the purity of initial paclitaxel (6.81%) increased to 22.0% after purification. Compared to the traditional method, the phase separation time of the back extraction decreased by 40.7-56.2% (ultrasonic power 80 W), 46.3-67.6% (ultrasonic power 180 W), and 51.9-67.6% (ultrasonic power 250 W), respectively. The phase separation time decreased as the ultrasonic power (80-250 W) and irradiation time (0.5-2.5 h) increased.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.89-95
• /
• 2021

As the influence of fine dust on society spreads gradually, the public's interest in indoor air is increasingly rising. Air-purifying plants are drawing keen attention due to their natural purifying function enabled by plant physiology. However, as their fine dust reduction mechanism is limited to adsorption only, vegetation bio-filters that optimize purification effects through integration with air-conditioning systems is rising as an alternative. In accordance with the relevant standard test methods, this study looked into the fine dust reduction assessment method by air-conditioning airflow volume that can be used for the industrial spread of vegetation bio-filters. In the case of PM₁₀ at 300 ㎍/m³, it was in the order of EG-B(3,500CMH, 29 min.) < EG-A (2,500CMH, 37 min.) < CG(0CMH, 64 min.) for reaching the maintenance level (100 ㎍/m³) of publicly used facilities. For reaching the WHO Guideline(50 ㎍/m³) requirement, it was in the order of EG-B (51 min.) < EG-A (160 min.) < CG (170 min.). In the case of PM_2.5, it was in the order of EG-B (26 min.) < EG-A (33 min.) < CG (57 min.) for reaching the maintenance level (50 ㎍/m³) of publicly used facilities. It was in the order of EG-B (48 min) < EG-A (140 min) < CG (158 min) for reaching the WHO Guideline (25 ㎍/m³) requirement. The findings from the analysis showed that fine dust can be reduced most efficiently when the system is operated at 3,500CMH level. The limitation of this study is that due to the absence of a way of assessing the stress of plants in vegetation bio-filters, generating optimal air-conditioning air flow of the relevant system and economics analysis against the existing facility-type air purification system have been clarified, which should be explored further though follow-up studies.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.117-120
• /
• 2007

Fuel cells are currently attracting tremendous interest because of their huge potential in stationary applications, in terms of substantiality of our energy use. They also offer environmental advantages, combining significantly higher efficiency with very much lower emission of SOx, NOx, and residual hydrocarbons, and significantly reduced $CO_{2}$ emissions compared to conventional power generation. The molten carbonate fuel cell (MCFC) was introduced from Fuel Cell Energy(FCE), which the one MCFC was operating by LNG and the other was operating by ADG. The ADG contains normally CH4, CO2 and various impurities such as sulfur compounds and siloxanes. Using the ADG as a fuel, MCFC have the potential to provide significant environmental and economic benefits. However, such impurities would be harmful to fuel cells. In this work, a purification process for the ADG was designed and installed in order to utilize the gas as a fuel for MCFC.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.4
• /
• pp.72-81
• /
• 2001

This study is aimed to review the previous research accomplishments with analysis of problems and to suggest the counter plan for the watershed management and the ongoing research strategy. Phytoremediation provides a cost-effective techniques having a merit of low investment and maintenance cost. It could be one of the best techniques, which is an alternative plan to overcome economical situation and lack of experts in our country. In forest watershed affected by waste water and heavy metal pollutants should be controlled by vegetative remediation system, but the disposal techniques of harvested plant materials should be developed. Also, high degree areas of natural vegetation as a key model to recover the vegetation should be well conserved. It is important to restore forest continuity between upper stream and lower stream basin with the restoration of damaged in forest watershed. It is established to integrated protection system for land use and management plan and to natural environment evaluation methods affected by projects such as erosion control and developments in stream and forest. In addition, I suggest the continuous environmental monitoring system to treat the pollutions concerned.

• KSBB Journal
• /
• v.24 no.2
• /
• pp.212-215
• /
• 2009

In this study, the process parameters of liquid-liquid extraction were optimized to obtain a high purity and yield of paclitaxel in a pre-purification step. The optimal solvent ratio (methylene chloride/concentrated methanol extract ratio), extraction times, mixing time, and standing time for liquid-liquid extraction were 0.28 (v/v), 3(times), 30 min, and 40 min, respectively. The polar impurities from the biomass extraction were efficiently removed by liquid-liquid extraction. The complete concentration of liquid-liquid extract by rotary evaporator was reliable enough to obtain a high purity and yield of paclitaxel for subsequent purification steps.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.3
• /
• pp.177-187
• /
• 2002

The contamination problem is getting worse now a day because of the industrial activities. Recently it has been announced that there's environmental hormone in river and lake which produces clean water, also there's too many of algae reproduces under the water and some virus in the drinking water. The quality of water is very important. pure and clean water is not only a precondition for human being to live but a basic factor to improve the quality of life. so a water purification system must be developed. This study is about the surface washing treatment technique. We tried to use a rotary nozzle to get a tush degree of efficiency, for it was not enough with present way of washing. The nozzle is run by water pressure. The results of the experiment are as follows. We got a clean and equal surface after washing. After washing, the water's maximum consistency was 330NTU and it shows that this way is better than before one with 215NTU. Clean level of the filter was 6$^{\circ}$and it's 2.8 times higher than 17$^{\circ}$with the old way. We can see the results that the new way of washing is more effective than old way based on this study.

• Membrane and Water Treatment
• /
• v.8 no.2
• /
• pp.137-147
• /
• 2017

A water treatment utility in South Korea operates a large system of pressurized hollow fiber membrane (PHFM) modules. The optimal selection of membrane module for the full scale plant was critical issue and carried out using Risk-based Life Cycle Cost (RbLCC) analysis based on the historical data of operation and maintenance. The RbLCC analysis was used in the process of decision-making for replacing aged modules. The initial purchasing cost and the value at risk during operation were considered together. The failure of modules occurs stochastically depending on the physical deterioration with usage over time. The life span of module was used as a factor for the failure of Poisson's probability model, which was used to obtain the probability of failure during the operation. The RbLCC was calculated by combining the initial cost and the value at risk without its warranty term. Additionally, the properties of membrane were considered to select the optimum product. Results showed that the module's life span in the system was ten years (120 month) with safety factor. The optimum product was selected from six candidates membrane for a full scale water treatment facility. This method could be used to make the optimum and rational decision for the operation of membrane water purification facility.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.2
• /
• pp.129-137
• /
• 2006

A study was conducted to investigate the behavior of pollutant forms at each area in the sewage treatment plant by natural purification method. The sewage treatment plant by natural purification method that consisted of aerobic and anaerobic area was constructed. The efficiency of sewage treatment depending on the operation time, the loading amount of pollutant season variation were investigated. The removal amount of BOD, COD, TOC and SS in the aerobic area was significantly increased as the treatment proceeded. Decreased BOD, COD, TOC, SS, T-N and T-P depending on the loading amount of pollutants in the aerobic and ananerobic area were mostly insoluble BOD (IBOD), insoluble COD (ICOD), soluble TOC (STOC), volatile SS (VSS), dissolved T-N (DTN) and dissolved T-N (DTP) types, respectively. The removal efficiency of BOD, COD, TOC, SS, T-N and T-P in hot season (summer and autumn) were more than that in cold season (spring and winter). The removal efficiencies of BOD, COD, TOC, SS, T-N and T-P of the effluent were about 92, 89, 73, 95, 46 and 84% in all seasons, respectively.

• Plant Disease and Agriculture
• /
• v.5 no.1
• /
• pp.27-33
• /
• 1999

Frost injury of crops is closely related to the epiphytic population dynamics of ice nucleation-active (INA) bacteria, and the injury can be reduced by decreasing the INA bacterial population. In order to predict the epiphytic population of INA bacteria on crops, a rapid and accurate detection method has to be developed. In the previous report, we produced some antibodies against INA proteins purified from the outer membrane of INA bacteria. However it was difficult to produce the antibodies because the purification procedures of the INA proteins were complicated, and the final yield was too low. We designed a specific peptide from the N-terminal region of INA protein by computer analysis and synthesized the peptide in vitro in this experiment. The peptide sequence was Asp-Ser-Por-Leu-Ser-Leu-His-Ala-Asp, that is corresponding to the highly conserved region in several INA proteins, with predicted beta turn, coiling, and hydrophilic region. A polyclonal anti-INA peptide antiserum produced specifically recognized INA bacteria as few as 10 colony-forming units (CFU) in the ELISA reactions and did not respond to other non-INA bacteria. Serological specificity of the anti-INA peptide antiserum will facilitate the forecasting of the INA bacterial population dynamics on crops.

• The Plant Pathology Journal
• /
• v.27 no.1
• /
• pp.37-43
• /
• 2011

Rice stripe virus (RSV) is one of serious epidemic pathogens for rice species grown in many Asian countries. Therefore, it is necessary to produce a diagnostic detection kit applicable in fields for RSV detection. In this study, RSV proteins that were derived from recombinant proteins and synthetic polypeptides as antigens were generated and were raised in rabbits for antiserum production. Among seven proteins in RSV, genes that code for NCP and NS3 proteins were cloned and subcloned into vector carrying His-tag protein and were expressed in E. coli. Of two recombinant proteins, only anti-NCP displayed stable hybridization signals in western blot analysis. Alternately, synthetic RSV polypeptides for CP, NCP, NS3 and NSvc4 we also generated and only antibodies against CP and NCP were very effective to detect RSV in both RSV infected rice and weed plants. However, antibodies against NS3 and NSvc4 showed weak specific bands as well as strong non-specific background due to the difference of viral proteins produced in the infected leaves. In summary, the antibodies generated against RSV proteins produced in this study will be useful for various assays such as for RSV diagnostic detection, immunoprecipitation, protein purification, and western blot analysis.