• 제목/요약/키워드: Purification filter

검색결과 140건 처리시간 0.025초

원자로 냉각재 정화필터 및 밀봉수 주입필터 국산화 설계 (Design of Reactor Coolant Purification Filter and Seal Injection Filter)

  • 박종범;김동수;이주형
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.476-478
    • /
    • 2000
  • Objective is to design a high performance purification filter system of reactor coolant and seal injection system at nuclear power station. The purification filter systems play an important role in the stability of the nuclear and volume control system which consist the primary network systems of the nuclear power station. But the users of the purification filter systems frequently suffer from high maintenance cost which comes from lack of understanding of the system technology and domestic suppliers. It is time to establish a high performance domestic filter system manufacturing technology and optimum design for wide use in industrial applications.

  • PDF

UV-C를 이용한 광촉매 필터 디자인에 관한 연구 (A study on the photocatalyst filter design using UV-C)

  • 한상윤;강승민
    • 한국결정성장학회지
    • /
    • 제29권6호
    • /
    • pp.276-282
    • /
    • 2019
  • 본 연구의 목적은 공기청정기의 극세필터(프로필터), 집진필터, 헤파(HAPA-High Efficiency Particulate Air)필터, 탈취필터 등을 사용하는 일반적인 필터의 구조를 분석하고 초미세먼지, 유해가스 및 살균 정화성능을 향상시킬 수 있는 새로운 형태의 공기정화 필터 디자인을 제시하는 것이다. 기존 단계적 여과 필터 형태에 광촉매 필터 시스템을 추가하는 방법으로 연구하였으며, 광촉매 필터는 좌우측의 UV-LED 설치 프레임과 광촉매 코팅 허니컴(honeycomb)프레임 3단 결합구조의 디자인으로 제안했다. 광촉매 필터의 살균소독 효과에 대해서는 향후 연구가 필요하며, 본 연구에서는 공기청정기에 광촉매 필터 적용 및 구조에 대하여 보고하고자 한다.

끈상접촉산화시설을 이용한 하천수질정화 (Purification of Stream Water Quality by Using Rope Media Filter)

  • 정용준;임기성
    • 한국물환경학회지
    • /
    • 제22권2호
    • /
    • pp.238-243
    • /
    • 2006
  • In order to improve the water quality of stream water, the facilities equipped with rope media filter have been examined as a part of national projects. This work may provide design and operating parameters from 2 years monitoring for 2 streams. Depending on the characteristics of streams, the flow rate into the facilities were shown different, where K stream was almost the same and D stream was less than 25% of design flow rate. Although the clogging of filter media was not observed during the operation, the removal of accumulated sludges was required for the stable operation. The removal efficiencies of BOD, SS, T-N and T-P for D stream were 60.5%, 80.1%, 25.2% and 36.2%, respectively. The most important factor for the construction of stream water purification facilities was recommended for the selection of proper sites.

이끼를 활용한 공기정화 검증 시스템 제작 (Production of air purification verification system using moss)

  • 안도현
    • 한국산학기술학회논문지
    • /
    • 제20권6호
    • /
    • pp.587-591
    • /
    • 2019
  • 미세먼지는 대기를 타고 호흡기를 거쳐 폐 혹은 혈관에 침투 한다. 최근 미세먼지 문제 때문에 국내에 공기청정기 수요도 급증하고 있다. 이끼는 가장 오래된 지상식물로 중금속과 미세먼지를 흡착하여 분해하는 성질을 가지고 있는 것으로 알려졌고 본 연구진은 이를 활용하여 화학적 필터를 대체 할 수 있는 시스템에 대해 연구하였다. 이끼와 기존 화학적 필터(Hepa)의 미세먼지 감소 효과를 비교하기 위하여 $1m^3$의 큐브를 제작하고 통제된 환경하에서 미세먼지의 감소량을 비교하였다. 미세먼지 상황 하에서 이끼, 헤파, 무필터를 탑재한 공기정화 시스템을 각 30회씩 총 90회 가동 하였고 각각의 미세먼지 감소량 및 감소율을 비교한 결과 감소량은 미세먼지 이끼필터를 사용한 평균이 138.93으로 헤파필터를 사용한 평균 76.57과 무필터 상태의 평균인 0.10보다 유의하게 높았으며 감소율의 평균 역시 이끼필터를 사용한 경우 0.2379로 헤파필터를 사용한 경우의 0.1298이나 무필터인 0.0063보다 유의하게 높았다. 이 결과를 통해 이끼의 미세먼지 감소효과를 확인하였고 향후 개선을 통해 기존 공기정화기의 화학필터를 대체하거나 보조할 것으로 기대된다.

고 플럭스 MF막의 정수처리 실용화에 관한 연구 (Application of water control by high fiux MF membrane)

  • 황상용
    • 환경위생공학
    • /
    • 제23권2호
    • /
    • pp.55-63
    • /
    • 2008
  • All over the world, the existing process of water purification needs more flocculants and chlorine due to a gradual decline in the quality of source water. Therefore, the problem of the remaining aluminium and DBPs in purified water is on the rise. To solve this problem, the process of membrane filter has recently come into the spotight. This study reaches the following conclusions concerning TMP variation in order to solve the dropping of flux throgh a membrane filter when operating a membrane filter system in the process of water purification. 1. In case that a cohesion-precipitation process was introduced to pre-treatment of a membrane filter, initial TMP was very satisfactory(0.27kg/cm) in producing the constantly safe quality of water, $0.04{\sim}0.1$(mean 0.05) NTU by pouring 2mg/l of PACI(10% $Al_2O_3$) used for the existing process of water purification in high-density turbidity at a dry or flood season and at occurrence of high algae. 2. As flux increased at 0.5m/day.m, TMP increased 0.05 kgf/cm. 3. As filtering, operation mode of PVDF MF membrane filtering was 48 minutes and 1 cycle of back washing was 42 minutes, flux was increased 1.5m/day.m and TMP increased $0.25{\sim}0.27kgf/cm$. Without back washing, TMP increased 0.03 kgf/cm per a cycle.

Design of the air purification system with On/Off fan control to reduce harmful air in nail shop

  • Minwoo Cheon
    • Journal of Platform Technology
    • /
    • 제11권6호
    • /
    • pp.28-33
    • /
    • 2023
  • With the development of the beauty industry, the nail art industry is expanding, and through this, nail culture is becoming more popular. However, some products used in the nail art field may produce harmful substances, so great caution is required. In this paper, an air purification system was designed to reduce harmful air. The air purification system uses a harmful gas sensor to measure the level of pollution in the surrounding air and then turns the fan on/off to remove harmful gases and fine dust. Two types of filters and two fans can be driven and controlled respectively so that harmful gases are absorbed into the charcoal filter and fine dust is absorbed into the HEPA filter. In addition, filters, fans, and piping were appropriately placed to remove contaminated surrounding air as quickly as possible during nail procedures.

  • PDF

기능화에 의한 단일벽 탄소나노튜브 정제 및 페이퍼 제조와 전계방출 특성 연구 (Preparation of Bucky Paper using Single-walled Carbon Nanotubes Purified through Surface Functionalization and Investigation of Their Field Emission Characteristics)

  • 곽정춘;이승환;이한성;이내성
    • 한국전기전자재료학회논문지
    • /
    • 제21권5호
    • /
    • pp.402-410
    • /
    • 2008
  • Single-walled carbon nanotubes (SWCNTs) were currently produced together with some contaminants such as a metallic catalyst, amorphous carbon, and graphitic nanoparticles, which should be sometimes purified for their applications. This study aimed to develop efficient, scalable purification processes but less harmful to SWCNTs. We designed three-step purification processes: acidic treatment, surface functionalization and soxhlet extraction, and heat treatment. During the soxhlet extraction using tetrahydrofuran, specifically, carbon impurities could be easily expelled through a glass thimble filter without any significant loss of CNTs. Finally, SWCNTs were left as a bulky paper on the filter through membrane filtration. Vertically aligned SWCNTs on one side of bulky paper were well developed in a speparation from the filter paper, which were formed by being sucked through the filter pores during the pressurized filtration. The bucky paper showed a very high peak current density of field emission up to $200\;mA/cm^2$ and uniform field emission images on phosphor, which seems very promising to be applied to vacuum microelectronics such as microwave power amplifiers and x-ray sources.

광촉매 플라즈마 반응에 의한 몇가지 VOCs의 제거에 관한 연구 (Study on the Decomposition of Some Volatile Organic Compounds by Photocatalyst Plasma Reaction)

  • 허경욱
    • 한국대기환경학회지
    • /
    • 제16권4호
    • /
    • pp.373-380
    • /
    • 2000
  • A new type of photocatalyst plasma air purification filter for decomposition of some VOCs has been developed. The photocatalyst plasma air purification filter employs the pulsed discharge plasma as an energy source of TiO2. photocatalyst instead of UV light. In closed room(2m3) test removal efficiency of some VOCs was 80∼100% in 15∼24 hours. In the initial step of phptocatalyst plasma reaction. Acetone and Nitromethane etc were detected. But they were completely oxidized to CO2 and H2O.

  • PDF

Analysis to Select Filter Media and The Treatment Effect of Non-point Pollution Source in Road Runoff

  • Lee, Tae Goo;Han, Young Hae
    • KIEAE Journal
    • /
    • 제14권3호
    • /
    • pp.55-63
    • /
    • 2014
  • This study selected and analyzed filter media that can be applied in non-point pollution reduction devices aimed at processing the source of pollution on site for road runoff that increases rapidly in rainfall-runoff in order to improve the water quality of urban areas. First, the factors that affect the quality of runoff caused by sources of non-point pollution include physical and social factors such as the usage of land around the area of water collection, type of pavement and movement of cars and people, as well as rainfall characteristics such as frequency, intensity, amount and duration of rainfall. Second, the purification tests of the filter media were processed for pH, BOD, COD and T-P, and the filter media showed to have initial purification effect at that items. However, the filter media showed to be very effective for the processing of SS, T-N, Zn and Cd from the beginning to the end. Third, for filter media, zeolite and vermiculite showed to be effective for processing SS, T-N, Zn and CD constantly, and composite filter media including zeolite showed to have strong processing effects. The authors conclude that this study can be applied to technical areas and policies aimed at reducing non-point pollution in urban areas and can also contribute to allowing eco-friendly management of rainfall as well as improvement of water quality.

정수 설비를 위한 양전하가 부가된 다공성 수처리 필터 개발과 성능평가 (Development and Performance Evaluation of Positively Charged Porous Filter media for Water Purification System)

  • 이창건;주호영;이재근;안영철;박성은
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2006년도 하계학술발표대회 논문집
    • /
    • pp.95-98
    • /
    • 2006
  • Filtration by fibrous filter is one of the Principle methods used for removing pollutant particles in the liquid. Because of the increasing need to protect both human health and valuable devices from exposure to fine particles, filtration has become more important. Filters have been developed with modified surface charge characteristics to capture and adsorb particles by electrokinetic interaction between the filter surface and particles contained in water. The main purposes of this study are to develop and evaluate the performance evaluation of the apparatus for making a positively charged porous filter media and to analyze the surface characteristics of the filter media for capturing negavitely charged contaminants mainly bacteria and virus from water. The experimental apparatus consists of a mixing tank, a vacuum pumping system, a injection nozzle, a roller press and a controller. The filter media is composed of glass fiber(50-750 nm), cellulose($10-20{\mu}m$) and colloidal charge modifier. The characteristics of filter media is analyzed by SEM(Scanning Electron Microscopy), AFM(Atomic Force Microscopy) and quantified by measuring the zeta potential values.

  • PDF