• 제목/요약/키워드: Purge Gas

검색결과 93건 처리시간 0.031초

수소추출기의 부분부하 운전을 위한 PSA 제어전략에 대한 연구 (A Study on PSA Controll Strategy for Part Load Operation of a Hydrogen Generator)

  • 이상호;김선엽;최영
    • 한국수소및신에너지학회논문집
    • /
    • 제33권6호
    • /
    • pp.819-826
    • /
    • 2022
  • Fuel cell systems are being supplied to households and buildings to reduce greenhouse gases. The fuel cell systems have problems of high cost and slow startup due to fuel processors. Greenhouse gas reduction of the fuel cell systems is also limited by using natural gas. The problems can be solved by using a hydrogen generator consisting of a reformer and pressure swing adsorption (PSA). However, part load operation of the hydrogen generator is required depending on the hydrogen consumption. In this paper, PSA operation strategies are investigated for part load of the hydrogen generator. Adsorption and purge time were changed in the range of part load ratio between from 0.5 to 1.0. As adsorption time increased, hydrogen recovery increased from 29.09% to 48.34% at 0.5 of part load ratio. Hydrogen recovery and hydrogen purity were also improved by increasing adsorption and purge time. However, hydrogen recovery dramatically decreased to 35.01% at 0.5 of part load ratio.

Performance Analysis of Carbon Canister for Reducing Evaporative Emissions in a Gasoline Automotive Engine

  • Chung, Yon-Jong;Cho, Gyu-Sang;Erickson, Paul A.;Han, Sung-Bin
    • 에너지공학
    • /
    • 제17권2호
    • /
    • pp.47-53
    • /
    • 2008
  • The objective of this paper is to clarify the flow characteristic, velocity distribution, pressure loss, and other such fundamental data for the canister during loading and purging. The amount of gas that is loaded increases as the loading rate is decreased and the time increased, and the purging improves as the purge rate is increased. The hydrocarbons that are purged initially have a high concentration, and a large amount is purged. During loading and purging, the temperature initially increases and decreases drastically due to heat generation and heat loss.

가스 발생기 분사기 LOx post 손상 방지를 위한 분사기 개발 (Development of Gas Generator for Liquid Rocket Engine to prevent of damage for LOx post)

  • 송주영;김종규;문일윤;한영민;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제25회 추계학술대회논문집
    • /
    • pp.353-357
    • /
    • 2005
  • 본 연구는 30톤급 엔진 개발에 필요한 실물형 가스 발생기를 개발하는 과정에서 분사기 LOx post에 발생한 손상에 대해 기술하였고 손상에 대한 원인 분석에 대해 논의하였다. 4분사기, 실물형 가스발생기 및 1차 재설계된 분사기에 대한 연소시험 결과를 기술하였고 이에 대한 원인으로 연소 불안정, 종단시 purge, LOx 분무의 낮은 모멘텀, 작은 recess number, 적은 LOx 분사기 유량, 큰 분무 각도 등이 주원인임을 알 수 있었다. 이 분석 결과에 따라 recess number를 증가, 분사기 LOx 및 연료 분무각 증가, LOx post 외벽과 연료막 사이 간격 축소, LOx post 벽 두께 증가의 방향으로 분사기에 대한 재설계가 이루어졌다.

  • PDF

A Rapid Preconcentration Method Using Modified GP-MSE for Sensitive Determination of Trace Semivolatile Organic Pollutants in the Gas Phase of Ambient Air

  • He, Miao;Xu, Qingjuan;Yang, Cui;Piao, Xiangfan;Kannan, Narayanan;Li, Donghao
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권10호
    • /
    • pp.2995-3000
    • /
    • 2014
  • A sensitive concentration method utilising modified gas-purge microsyringe extraction (GP-MSE) was developed. Concentration (reduction in volume) to a microlitre volume was achieved. PAHs were utilised as semivolatile analytes to optimise the various parameters that affect the concentration efficiency. The injection rate and temperature were the key factors that affected the concentration efficiency. An efficient concentration (75.0-96.1%) of PAHs was obtained under the optimised conditions. The method exhibited good reproducibility (RSD values that ranged from 1.5 to 9.0%). The GP-MSE concentration method enhances the volume reduction (concentration factor), leading to a low method detection limit ($0.5-15ngL^{-1}$). Furthermore, this method offers the advantage of small-volume sampling, enabling even the detection of diurnal hourly changes in the concentration of PAHs in ambient air. Utilising this method in combination with GC-MS, the diurnal hourly flux of PAHs from the gas phase of ambient air was measured. Indeed, the proposed technique is a simple, fast, low-cost and environmentally friendly.

고농도 Out Gas 정량 분석법 개발

  • 김민주;김종윤;정기호;박창식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.13-13
    • /
    • 2009
  • 본 연구는 MLCC 구성성분의 증발/비등에 의한 저분자물질의 제거가 bar 수축에 미치는 영향도를 평가하기 위해, 압착 bar에서 발생하는 고농도의 out gas를 정량하기 위한 최적 system을 구축하고자 하였다. gas 포집에 범용적으로 사용하는 Purge & Trap sampler 대신 Heating block를 사용하여 gas를 발생시키고 동시에 solvent에 용해시킴으로써 고농도의 시료가 희석될 수 있는 전처리 장치를 디자인하였다. 그 결과 고농도 gas 주입에 의한 장비오염과 peak saturation 문제가 해결되었고, gas phase의 시료를 liquid phase로 상전이 시켜 autosampler를 이용한 정확한 량의 시료 주입이 가능하였다. System의 Gage Linearity와 Bias는 각각 1.7%와 1.3%로 개선이 필요없는 수준의 정확도를 가졌다.

  • PDF

Phormidium sp.의 Geosmin 생산에 미치는 환경요인의 영향 (Effect of Selected Environmental Factors on the Production of Geosmin in Phormidium Sp.)

  • 박대균;오희목;안치용;맹주선
    • 미생물학회지
    • /
    • 제36권1호
    • /
    • pp.52-57
    • /
    • 2000
  • Cyanobacteria와 방선균에 의해 생산되는 대표적 취기물질인 geosmin의 정성 및 정량 분석법을 확립하고, cyanobacteria인 Phormidium sp. NIVA-CYA7의 생장과 geosmin의 생산 및 방출에 영향을 주는 환경요인에 대해 조사하였다. Geosmin의 분석은 전처리과정이 간편하고, purge 시간을 1시간으로 단축한 purge & trap concentrator가 장착된 gas chromatograph로 분석하였다. Phomidium의 생장은 pH 7.9, 온도 $20^{\circ}C$, 광도 120-140 $\mu$E/ $m^(2)$/s, Z8 배지의 배양조건에서 8일까지 유도기를, 이후 14일까지 지수성장기를, 14일 이후에는 정상기를 보였다. 배지내 질소의 농도를 250 $\mu$M에서 100 또는 25 $\mu$M로 감소시켰을 때, Phormidium의 생장은 거의 영향을 받지 않았다. 반면에 배지의 인 농도를 25 $\mu$M에서 10 또는 2.5 $\mu$M로 감소시켰을 때, 인의 농도가 감소할수록 생장은 억제되었다. 배지내 인의 농도를 25 $\mu$M에서 10 $\mu$M로 감소시켰을 때, 단위 탄소당 또는 엽록소-$\alpha$당 geosmin의 함량은 각각 35%와 68% 증가하였다. Phormidium의 geosmin함량은 pH 9.4에서 0.0824 $\mu$g/mg C로 pH 6,4m 7.9에 비해 두 배 이상 많았다. 따라서 Phormidium의 geosmin 함량은 생장단계, 인의 농도, pH등에 따라 영향을 받지만, geosmin의 방출은 이들 요인에 의하여 크게 영향받지 않는 것으로 판단된다.

  • PDF

Combined Features with Global and Local Features for Gas Classification

  • Choi, Sang-Il
    • 한국컴퓨터정보학회논문지
    • /
    • 제21권9호
    • /
    • pp.11-18
    • /
    • 2016
  • In this paper, we propose a gas classification method using combined features for an electronic nose system that performs well even when some loss occurs in measuring data samples. We first divide the entire measurement for a data sample into three local sections, which are the stabilization, exposure, and purge; local features are then extracted from each section. Based on the discrimination analysis, measurements of the discriminative information amounts are taken. Subsequently, the local features that have a large amount of discriminative information are chosen to compose the combined features together with the global features that extracted from the entire measurement section of the data sample. The experimental results show that the combined features by the proposed method gives better classification performance for a variety of volatile organic compound data than the other feature types, especially when there is data loss.

반도체/LCD 제조공정에서의 Silane에 대한 ALARP개념의 화재 폭발 위험성평가에 관한 연구 (A Study on the As Low As Reasonably Practicable (ALARP)-Concept Risk Assessment of Silane in Semiconductor and LCD Process)

  • 이중희;황성민;우인성
    • 대한안전경영과학회지
    • /
    • 제12권4호
    • /
    • pp.93-98
    • /
    • 2010
  • 본 연구에서는, 반도체, LCD 공정에서 금속막을 증착하기 위하여 PECVD장비에 화재, 폭발 위험성과 독성을 가진 Silane가스를 사용하게 되는 장비인 gas cabinet, pipeline, VMB(Valve manifold box), MFC(mass flow controller)장비 등, 전반적인 시스템에 대하여 영국 HES의 ALARP개념을 도입하여 위험성 평가를 실시하여 문제점을 도출하고 대책을 강구 하는데 목적이 있고, 여러 가지 문제점중 절대적으로 수용 할 수 없는 Critical Risk로는 Gas Cylinder를 사용하여 Silane을 공급하고자 할 때에는 필히 Gas Cabinet을 사용하여 공급하여야 하고, Tube Trailer를 사용하여 공급하고자 할 때에는 필수적으로 Purge System을 갖추어 공급하여야 한다. 선택적으로 수용할 수 있는 High, Medium Risk로는 Gas Cylinder 또는 Tube Trailer를 사용하여 Silane을 공급하고자 할 때는 Inlet 부분에 RFO(Resticted Flow Orifice)를 설치하여 사용하고 Gas Supply Room에는 CO2소화설비를 적용하지 말고 Water Mist등 물 분무설비를 적용하여야한다.

Analytical Method of Epichlorohydrin in Canned Beverages by Purge-and- Trap/GC

  • Lee Kwang-Ho;Kwak In-Shin;Kim Dyoung-Il;Choi Byoung-Hee;Kim Guy-Joung;Lee Chul-Won
    • 한국식품위생안전성학회:학술대회논문집
    • /
    • 한국식품위생안전성학회 2001년도 The Asia-Pacific Conference on Reproductive Biology and Environmental Sciences
    • /
    • pp.140-140
    • /
    • 2001
  • A sensitive analytical method based on gas chromatograpy-mass spectrometry with a selected ion monitoring (GC/MS-SIM) with the purge-and-trap concentration and with headspace method (in limited applications) was developed for determining of epichlorohydrin in canned beverages coated with epoxy resin. The calibration curve in the range of $0.5\sim50ng$ had correlation coefficient greater than 0.998 and a detection limit of $0.l\mug/L$ was obtained using a sample volume of 20ml. The predominant ions of epichlorohydrin produced in MSD using electron ionization(EI) were m/z 57 ([M-CI]+) and 62/64 $([M-CH_2O]+)$. In survey of epichlorohydrin in thirty commercial canned beverage samples, none of them was detected.

  • PDF

1,4-Dioxane의 분석방법 연구 (A Study on the Research of Analytical Method for 1,4-Dioxane in Water)

  • 박선구;김태호;임연택;명노일
    • 한국물환경학회지
    • /
    • 제21권6호
    • /
    • pp.549-563
    • /
    • 2005
  • The study was carried out to develop and standardize the analytical method of 1,4-dioxane in water. The National Institute of Environmental Research in Korea has monitored for 1,4-dioxane in water since 1998 and it has been detected in environmental water occasionally. But the environmental pollution and analytical method in water is not well known over the world. The trace analytical method at low-${\mu}/L$ level is prerequisite in order to evaluate the residue of 1,4-dioxane in water. Evaluation of the method was demonstrated by comparing and analyzing with liquid-liquid extraction, solid-phase extraction and purge & trap technique. As a result of experiment by standard solutions and raw samples, the precision and accuracy for three methods were obtained within error rate of about 10%. Therefore, three methods were standardized as official monitoring method in Korea. Also, a convenient and simple liquid-liquid extraction method for the analysis of 1,4-dioxane in water was developed by combined with gas chromatography/mass spectrometry and applied to the water samples in Korea