• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.184-187
• /
• 2007

Hydrogen could be produced from any substance containing hydrogen atoms, such as water, hydrocarbon (HC) fuels, acids or bases. Hydrocarbon fuels couold be converted to hydrogen-rich gas through reforming process for hydrogen production. Even though fuel cell have high efficiency with pure hydrogen from gas tank, it is more beneficial to generate hydrogen from city gas (mainly methane) in residential application such as domestic or office environments. Thus hydrogen is generated by reforming process using hydrocarbon. Unfortunately, the reforming process for hydrogen production is accompanied with unavoidable impurities. Impurities such as CO, $CO_2$, $H_2S$, $NH_3$, and $CH_4$ in hydrogen could cause negative effects on fuel cell performance. Those effects are kinetic losses due to poisoning of electrode catalysts, ohmic losses due to proton conductivity reduction including membrane and catalyst ionomer layers, and mass transport losses due to degrading catalyst layer structure and hydrophobic property. Hydrogen produced from reformer eventually contains around 73% of $H_2$, 20% or less of $CO_2$, 5.8% of less of $N_2$, or 2% less of $CH_4$, and 10ppm or less of CO. Most impurities are removed using pressure swing adsorption (PSA) process to get high purity hydrogen. However, high purity hydrogen production requires high operation cost of reforming process. The effect of carbon dioxide on fuel cell performance was investigated in this experiment. The performance of PEM fuel cell was investigated using current vs. potential experiment, long run (10 hr) test, and electrochemical impedance measurement when the concentrations of carbon dioxide were 10%, 20% and 30%. Also, the concentration of impurity supplied to the fuel cell was verified by gas chromatography (GC).

• Journal of Photoscience
• /
• v.4 no.3
• /
• pp.147-160
• /
• 1997

INTRODUCTION : Various types of organic reactions in the crystalline state, so-called "topochemical reaction", have been reported in this century." Among the reactions, [2+2] photocycloaddition of diolefin crystals are one of the most intensively investigated examples. In the topochemical reaction in a pure sense, the space group symmetry is perfectly preserved throughout the reaction as were demonstrated by the crystalline-state photopolymerization of 2,5-distyrylpyrazine (2,5-DSP) and photodimerization of propyl $\alpha$-cyano-4-[2-(4-pyridyl) ethenyl]cinnamate. 2,5-DSP was initially prepared by Franke and in 1958 Koelsch and Gumprecht described briefly in their article of diazine-derivatives that it was found that the compound (2,5-DsP) was converted into a colorless insoluble polymer (\ulcorner) dec. 331~331$\circ$ when the solid was exposed for a few hours to ultraviolet light. Wright described in his book as if Koelsch and Gumprecht had investigated both the structure of the photoproduct and the crystal structure 2,5-DSP in detail. However, in the paper, they have not described any study on chemically correct analysis and crystallography of the resulting photoproduct at all. In 1967, one of present authors (M. H.) independently made the same observation as Franke that brilliant yellow crystal of 2,5-DSP was converted into powdery white substance under the sunlight in the course of a preparative study of pyrazine-2,5-dicarboxylic acid from 2,5-DSP. He investigated this phenomenon and concluded for the first time that a linear highmolecular-weight polymer crystal ([$\eta$] > 3.0 in $CF_3COOH$ solution) with recurring cyclobutane units in the main chain, had been produced from 2,5-DSP crystal by the action of sunlight.on of sunlight.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.310-316
• /
• 2006

In this study, activated carbon in a powder form was used to remove dissolved ammonia which causes a fouling smell in water. Since the adsorption capacity of common powder activated carbon is not high enough, we prepared powder activated carbon deposited on an acid solution to enhance the adsorption capacity. The acid-impregnated activated carbon was applied on the surface of porous fibril support ($10{\sim}50{\mu}m$) by which adsorption and separation processes take place simultaneously by varying effective pressure. As the result, the ammonia removal efficiency is above 60% in the mixing process which is 10~15% higher than general powder activated carbon. From the result of an experiment on the pure permeable test of a dynamic membrane, its transmittance is 400~700 LMH (liter per hour), indicating that the prepared membrane works as a microfiltration membrane. Therefore, it is expected that the membrane prepared in this way would improve the efficiency of water treatment than conventional membranes.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.172-172
• /
• 2016

The International Maritime Organization(IMO) adopted the International Convention for the Control and Management of Ships' Ballast Water and Sediments in 2004 to prevent the transfer of aquatic organisms via ballast water. Forty ballast water treatment systems were granted final approval. A variety of techniques have been developed for ballast water treatment including UV treatment, indirect or direct electrolysis, ozone treatment, chemical compounds and plasma-arc method. In particular, using plasma and ozone nano-bubble treatments have been attracted in the fields. However, these treatment systems have a problem such as remained toxic substance, demand for high power source, low efficiency, ets. In this paper, we present our strilization results obtained from membrane type electrolytic-reduction treatment system The core of an electrolysis unit is an electrochemical cell, which is filled with pure water and has two electrodes connected with an external power supply. At a certain voltage, which is called critical voltage, between both electrodes, the electrodes start to produce hydrogen gas at the negatively biased electrode and oxygen gas at the positively biased electrode. The amount of gases produced per unit time is directly related to the current that passes through the electrochemical cell. From the results, we could confirm the sterilization effect of bacteria such as S. aureus, E. Coli and demonstrate the mechanism of sterilization phenomena by electrolytic-reduction treatment system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.569-573
• /
• 2001

A pectic substance from citron peel was extracted with different methods to establish the optimum extraction conditions. The extraction yields of pectin with HCl, citrate and tartrate (concentration : 0.1 N, extraction ratio : 1 : 20) were 17.9%, 15.6% and 11.4%, respectively. Six times of 65% ethanol washing step was followed after first ethanol precipitation of acid extract for pure pectin. The degree of esterification (DE) of pectins was in the range of 43.0~47.6% and intrinsic viscosity was in the range of 0.94~2.63 (η$_{sp}$ /C (dL/g)). The sugar compositions such as rhamnose, xylose, glucuronic acid, galacturonic acid, galactose and glucose were little different in three kinds of pectins except for the content of arabinose.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.3
• /
• pp.67-86
• /
• 1999

Ascorbic acid which has various physiological benefits as the functional substance is easily oxidized and destroyed by the structural instability. Liposome encapsulated pure ascorbic acid was prepared for the sake of the constraint of oxidation. The influence of cholestrol or $\beta$-sitosterol on the stabilization of liposome was investigated. Butylated hydroxytoluene(BHT), tertiary butylhydroquinone(TBHQ), $\alpha$ -glycosyl rutin and natural concentrated tocopherol were used for constraint of oxidation of ascorbic acid. The presence of cholesterol or $\beta$-sitosterol decreased oxidation of ascorbic acid. That results were thought that cholesterol or $\beta$-sitosterol so increased rigidity of bilayer that the leakage of vitamin C decreased. As a result the oxidation and degradation of vitamin C were constrained. At 0.3w/w% cholesterol content the most stable liposome was formulated. The whole antioxidant that used at the research constrained oxidation of ascorbic acid. The antioxidation for ascorbic acid increased in order of tertiary butylhydroquinone, $\alpha$-glycosyl rutin, butylated hydroxytoluene and natural concentrated tocopherol. But u -glycosyl rutin is preferable to tertiary butylhydroquinone which was the most effective in antioxidation as the antioxidant of ascorbic acid which was utilized in cosmetics and pharmacy.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.222-228
• /
• 2018

Benzene is one of the most widely used basic materials in the petrochemical industry. Generally, benzene exists as a mixture with alcohols rather than as a pure substance. Further, the alcohols-added mixtures usually exhibit an azeotropic composition. In this context, knowledge of the phase equilibrium behavior of the mixture is essential for its separation and purification. In this study, the vapor-liquid equilibrium data were measured in favor of a recirculating VLE apparatus under constant pressure for the 1 - propanol / benzene system. The measured vapor - liquid equilibrium data were also correlated by using the UNIQUAC and WILSON models and the thermodynamic consistency test based on the Gibbs/Duhem equation was followed. The results of the phase equilibrium experiment revealed RMSEs (Root Mean Square Error) and AADs (Average Absolute Deviation) of less than 0.05 for both models, indicating a good agreement between the experimental value and the calculated value. The results of the thermodynamic consistency test also confirmed through the residual term within ${\pm}0.2$.

• Journal of the Korean Chemical Society
• /
• v.56 no.4
• /
• pp.518-529
• /
• 2012

The purpose of this study is to analyze the cognitive demands level of the description about 'element', 'periodic table', and 'atom' on the 'science 2' textbooks by the 2007 revised curriculum. The three types of CAT (Curriculum Analysis Taxonomy) have been used to analyze the cognitive demands level of those contents on the 6 kinds of 'science 2' textbooks. The cognitive demands level about 'elements' on many textbooks is a late concrete operational stage, because the descriptions of 'element' are pure substances or no more split into anything simpler substances. That cognitive demands level about one textbook is a early formal operational stage, because the descriptions 'element' are a substance of one kind of atom. The cognitive demands level of 'periodic table' on many textbooks is a late concrete operational stage, because the descriptions about 'periodic table' are the hierarchical classification for the categorizing reality. And the cognitive demands level of 'periodic table' is a early formal operational stage, because the descriptions about 'periodic table' are a collection of 'families' or two-way gradation of elements. That cognitive demands level about one textbook is a late formal operational stage, because the descriptions of 'periodic table' are a complex classificatory structure linking atomic structure. The cognitive demands level about 'atom' is a early formal operational stage because of the descriptions as "atoms have structure, some atoms are the same, or others are different".

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.108-115
• /
• 2012

Archaeological waterlogged woods found under the sea, in lakes, or in swamp environments are generally weak and fragile. If waterlogged wood materials were taken out of the water and left without modification, they would collapse and lose their original dimensions completely. Conservation is performed to replace the water with chemical agents and to give dimensional stabilization and durability. EDTA and PEG are the most commonly used in the preservation of wood. pH control-precipitation method is used for recovery of EDTA from waste fluid of archeological waterlogged wood conservation treatment. The black substance is eliminated from wood as Fe-EDTA complex are formed and EDTA is separated and precipitated from Fe-EDTA complexes at pH 2.68 or less. The result of analysis of the precipitated products and the commercial EDTA by FT-IR and FE-SEM showed that precipitated product by pH adjusted was not a type of Fe-EDTA complex, but pure EDTA. Waste fluid produced in PEG treatment shows the black color and has an offensive odor by organic matter extracted from wood. Color of waste fluid is decolored with oxidation reaction by peroxy hydrate. In FT-IR and SEM-EDX of PEG after freeze-drying process, no significant change of functional groups induced from oxidation is observed, and any metal ion does not exist in the solid PEG specimen. The molecular weight of PEG is measured using GPC and viscometry. Properties of PEG before and after preservation treatment, and after oxidation with $H_2O_2$ were not changed. Consequently, the peroxidation with $H_2O_2$ is a reasonable and simple method to decolor the used PEG solution.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.173-180
• /
• 2004

Nano sized ZnO particle as 20-30nm applies for material, pigments, rubber additives, gas sensors, varistors, fluorescent substance as well as new material such as photo-catalyst, sensitizer, fluorescent material. ZnO with a particle size in the range 20-30nm has provided to be an excellent UV blocking material in the cosmetics industry, which can be used in sunscreen product to enhance the sun protection factor and natural makeup effect. But pure ZnO particles application limits for getting worse wearing feeling. We make high-functional inorganic-composite that coated with nano-ZnO on the plate-type particle such as sericite, boron nitride and bismuthoxychloride. In this experiment, we synthesized composite powder using hydrothermal precipitation method. The starting material was ZnCl$_2$ Precipitation materials were used hexamethylenetetramine(HMT) and urea. We make an experiment with changing as synthesis factors that are concentrations of starting material, precipitation materials, nuclear formation material, reaction time, and reaction temperature. We analyzed composite powder's shape, crystallization and UV-blocking ability with FE-SEM, XRD, FT-IR, TGA-DTA, In vitro SPF test. The user test was conducted by product's formulator. In the results of this study, nanometer sized ZnD was coated regardless of the type of plate-powder at fixed condition range. When the coated plate-powders were applied in pressed powder product, the glaze of powder itself decreased, but natural make-up effect, spreadability, and adhesionability were increased.