• 한국해양공학회지
• /
• 제34권2호
• /
• pp.55-65
• /
• 2020

A review of the 2nd generation of intact stability by the International Maritime Organization is performed. The main issues with the new stability criteria are reviewed. In particular, the physical background and related mathematical formulations of the pure loss of stability and parametric roll are summarized. Based on a literature review, benchmark calculation results for 17 different types of ships are discussed, and the final results are in excellent agreement with our physical expectations. Some relatively serious design problems are found in the application of the new stability criteria to sample ships built in Korea, and possible technical solutions are proposed, which have to be improved in the coming years.

• 한국화재소방학회논문지
• /
• 제33권5호
• /
• pp.19-27
• /
• 2019

저점도 에폭시 수지(EP)를 기본으로하고 캡슐화된 소화약제(EFA)를 50 wt%의 함유한 소화복합재료가 얻어졌다. 탈캡슐화된 EFA의 동역학 및 온도에 대한 EP의 긍정적인 효과가 확립되었다. EP는 EFA의 탈캡슐화 온도를 130 ℃에서 155 ℃로 증가시키고 캡슐화의 역학을 변화시킨다. 에폭시 매트릭스는 순수한 EFA와 비교하여 EFA의 열 안정성을 3.9배 이상 증가시킨다. EFA의 저장 안정성에 대한 EP의 보호 효과가 발견되었다. 60 ℃ 및 80% 습도에서 96시간 동안 EFA를 함유하는 EP의 질량 손실은 0.4%이고, 동일한 조건에서 순수한 EFA의 질량 손실은 15%이다. 자외선의 영향 아래에서 EP의 동일한 효과: 순수한 EFA가 6%인 경우 EFA를 함유한 EP는 0.8% 손실된다. 대안의 중합체 매트릭스의 시험이 고려되었다.

• Advances in materials Research
• /
• 제3권2호
• /
• pp.105-116
• /
• 2014

The microwave dielectric properties of $CeO_2$ nanoparticles (0.5, 1.0 & 1.5wt%) doped $Mg_2TiO_4$ (MTO) ceramics have been investigated at cryogenic temperatures. The XRD patterns of the samples were refined using the full proof program reveal the inverse spinel structure without any secondary phases. The addition of $CeO_2$ nanoparticles lowered the sintering temperature with enhancement in density and grain size as compared to pure MTO ceramics. This is attributed to the higher sintering velocity of the fine particles. Further, the microwave dielectric properties of the MTO ceramics were measured at cryogenic temperatures in the temperature range of 6.5-295 K. It is observed that the loss tangent ($tan{\delta}$) of all the samples increased with temperature. However, the $CeO_2$ nanoparticles doped MTO ceramics manifested lower loss tangents as compared to the pure MTO ceramics. The loss tangents of the pure and MTO ceramics doped with 1.5 wt% of $CeO_2$ nanoparticles measured at 6.5K are found to be $6.6{\times}10^{-5}$ and $5.4{\times}10^{-5}$, respectively. The addition of $CeO_2$ nanoparticles did not cause any changes on the temperature stability of the MTO ceramics at cryogenic temperatures. On the other hand, the temperature coefficient of the permittivity increased with rise in temperature and with the wt% of $CeO_2$ nanoparticles. The obtained lower loss tangent values at cryogenic temperatures can be attributed to the decrease in both intrinsic and extrinsic losses in the MTO ceramics.

• Journal of Hydrospace Technology
• /
• 제1권1호
• /
• pp.57-65
• /
• 1995

For the mechanism of ship capsizing, we can generally consider that it\`s caused due to pure loss of stability, parametric oscillation(low cycle resonance) of ship in waves and the broaching phenomena. Among them, low cycle resonance occurs due to the dynamic change of righting arm with respect to the relative position of ship to waves. The dynamic change depends on the encounter period of a ship in following waves. This paper discusses the following items : (1) An analytical expression of GZ curve varying with respect to the relative position of ship to waves, (2) Non-linear equation of motion describing low cycle resonance, (3) The effects of righting arm, stability range and encounter period on low cycle resonance.

• 한국표면공학회지
• /
• 제40권1호
• /
• pp.39-43
• /
• 2007

The pure CrN powders oxidized to $Cr_2O_3$ noticeably above $850^{\circ}C$ in air. When these powders were sintered into bulk samples at $1500^{\circ}C$ under 40 atm of $N_2$ pressure, the CrN phase partly changed into the $Cr_2N$ phase, owing to the partial loss of nitrogen from CrN. When the bulk sample was heated at $1000-1200^{\circ}C$ for 100 hr under vacuum, the CrN phase also progressively changed into $Cr_2N$. At the same time, a relatively thin $Cr_2O_3$ layer formed on the bulk sample due to the reaction of chromium with residual oxygen in vacuum.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권1호
• /
• pp.69-74
• /
• 1999

Adaptive algorithms based on gradient adaptation have been extensively investigated and successfully joined with active noise/vibration control applications. The Filtered-X LMS algorithm became one of the basic feedforward algorithms in such applications, but is not fully understood yet. Effects of cancellation path model on the Filtered-X LMS algorithm have investigated and some useful properties related to stability were discovered. Most of the results stated that the error in the cancellation path model is undesirable to the Filtered X LMS. However, we started convergence analysis of Filtered-X LMS based on the assumption that erroneous model does not always degrade its performance. In this paper, we present a way of optimizing the cancellation path modern in order to enhance the convergence speed by introducing intentional phase error. Carefully designed intentional phase error enhances the convergence speed of the Filtered X LMS algorithm for pure tone noise suppression application without any performance loss at steady state.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.43-46
• /
• 1995

Adaptive algorithms based on gradient adaptation have been extensively investigated and successfully jointed with active noise/vibration control applications. The Filtered-X LMS algorithm became one of the basic feedforward algorithms in such applications, but still is not fully understood. The error path model effect on the Filtered-X LMS algorithm has been under the investigation and some useful properties related stability has been discovered. We are interested in utilizing the fact that the model error caused by the way optimizing the error path model in a view point of convergence speed of Filtered-X LMS algorithm for pure tone noise suppression application without any performance loss at steady state.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.216-219
• /
• 1996

Polytetrafluoroethylene is very suitable for insulation materials because of it's high thermal and chemical stability, high electrical resistance and low loss factor. But almost all kinds of pure fluoroplastic cannot endure long time in the high temperature arc environment breaking high voltage and current In this study, inorganic materials such as BN, TiO$_2$ and Al$_2$O$_3$ were filled in the polytetrafluoroethylene to improve arc resistance. The electrical properties, arc resistant properties and light reflectance of the composites were investigated.

• Journal of Welding and Joining
• /
• 제28권4호
• /
• pp.73-80
• /
• 2010

In this work, the effect of welding variables on weldability of gas tungsten arc(GTA) welding was investigated with experimental analysis for a commercial pure(CP) titanium (Grade.1). The GTA welding tests on sheet samples with 0.5mm in thick were carried out at different process variables such as arc length, welding speed and electrode shape. In order to search an optimum arc length with full penetration, bead- on-plate welding before butt-welding were performed with different arc length conditions. From the bead- on-plate welding results, the optimum condition considering arc stability and electrode loss was obtained in the arc length of 0.8mm. Butt-welding tests based on the arc length of 0.8mm were carried out to achieve the optimum conditions of welding speed and electrode shape. Optimum conditions of welding speed and electrode shape were suggested as 10 mm/s and truncated electrode shape, respectively. It was successfully validated by the microstructural observation, tensile tests, micro-hardness tests and formability tests.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.29-38
• /
• 2004

본 연구에서는 생분해성 고분자인 polybutylene succinate-adipate (PBS-AD)에 옥수수 전분을 충전제로 첨가한 생분해성 복합재의 열적성질에 대해 고찰하였다. 열분석은 온도에 대한 함수로서 복합재 물질의 화학적 성질과 중량 감소율을 측정할 수 있는 분석적인 방법으로 사용되고 었다. 옥수수 전분의 열안정성은 순수한 생분해성 고분자인 PBS-AD보다 낮았다. 옥수수 전분의 함량이 증가할수록 생분해성 복합재의 열안정성과 열분해 온도는 감소하였고 회분의 함량은 증가하였다. 이것은 생분해성 복합재의 계면에서의 결합려이 옥수수 전분의 혼합비율이 증가할수록 감소하였기 때문이다. 옥수수 전분의 함량이 증가할수록 생분해성 복합재의 유리전이온도(T_g) 와 용융온도(T_m) 에는 큰 변화가 없었다. 옥수수 전분이 혼합된 생분해성 고분자 복합재의 저장 탄성율(E')과 손실 탄성율(E") 값은 PBS-AD보다 높았다. 이 결과는 옥수수 전분의 첨가로 인하여 생분해성 복합재의 강성이 증가하였기 때문이다. 고온에서 생분해성 고분자 복합재의 감소된 저장 탄성율 값은 온도가 증가할수록 고분자 사슬의 운동성이 증가하기 때문이다. 위의 결과들로부터, 옥수수 전분이 생분해성 고분자 복합재를 제조하는데 충전제로서 사용이 가능하다고 예상할 수 있었으며 옥수수 선분과 생분해성 고분자의 계면에서의 결합력을 향상시키기 위하여 결합제의 사용이 요구된다.