• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.183-183
• /
• 2014

Recently, multiferroic materials gain much attention due to their fascinating fundamental physical properties. These materials offer wide range of potential applications such as data storage, spintronic devices and sensors, where both electronic and magnetic polarizations can be coupled. Among single-phase multiferroic materials, $BiFeO_3$ is typical because of the room-temperature magnetoelectric coupling in view of long-range magnetic- and ferroelectric-ordering temperatures. However, $BiFeO_3$ is well known to have large leakage current and small spontaneous polarization due to the existence of oxygen vacancies and other defects. Furthermore the magnetic moment of pure $BiFeO_3$ is very weak owing to its antiferromagnetic nature. Recently, various attempts have been performed to improve the multiferroic properties of $BiFeO_3$ through the co-doping at the A and the B sites, by making use of the fact that the intrinsic polarization and magnetization are associated with the lone pair of $Bi^{3+}$ ions at the A sites and the partially-filled 3d orbitals of $Fe^{3+}$ ions at the B sites, respectively. In this study, $BiFeO_3$, $Bi_{0.9}Ho_{0.1}FeO_3$, $BiFe_{0.97}Ni_{0.03}O_3$ and $Bi_{0.9}Ho_{0.1}Fe_{0.97}Ni_{0.03}O_3$ bulk compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Ho_2O_3$, $Fe_2O_3$ and $NiO_2$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ for 24 h to produce the samples. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ and sintered in air for 1 h. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent and temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer and superconducting quantum-interference device.

• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.208-213
• /
• 2013

The contents of raw materials which are components of mixed substrate for mushroom cultivation were analyzed to optimize the composition. The pure protein(amino acid) level of soybean meal was the highest, 44.02% followed by those of soybean curd residue(31.5%) and cotton seeds meal(30.6%). The non protein nitrogen(NPN) contents in crude protein of main nitrogen materials were 2.4% for soybean meal and 5.6% for dried soybean curd residue, while those of wheat bran and rice bran used as the carbon source were relatively higher, 17.6% compared to that of nitrogen supplying media. Crude protein content per price was 6.0 for rapeseed meal, indicating that it is high crude protein content per price. Nitrogen-free extract(NFE) considering as an ingredient for mycelial growth were high in alphacorn(72.9%) and wheat bran B(57.2%). Acid detergent fiber(ADF) was high in corncob, 51.88%, its use for cultivation of brown rot fungi including Lentinus lepideus should pay attention because the fungi lack complete lignin degradation activity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.377-377
• /
• 2012

Microprocessor technology now relies on copper for most of its electrical interconnections. Because of the high diffusivity of copper, Atomic layer deposition (ALD) $TaN_x$ is used as a diffusion barrier to prevent copper diffusion into the Si or $SiO_2$. Another problem with copper is that it has weak adhesion to most materials. Strong adhesion to copper is an essential characteristic for the new barrier layer because copper films prepared by electroplating peel off easily in the damascene process. Thus adhesion-enhancing layer of cobalt is placed between the $TaN_x$ and the copper. Because, cobalt has strong adhesion to the copper layer and possible seedless electro-plating of copper. Until now, metal film has generally been deposited by physical vapor deposition. However, one draw-back of this method is poor step coverage in applications of ultralarge-scale integration metallization technology. Metal organic chemical vapor deposition (MOCVD) is a good approach to address this problem. In addition, the MOCVD method has several advantages, such as conformal coverage, uniform deposition over large substrate areas and less substrate damage. For this reasons, cobalt films have been studied using MOCVD and various metal-organic precursors. In this study, we used $C_{12}H_{10}O_6(Co)_2$ (dicobalt hexacarbonyl tert-butylacetylene, CCTBA) as a cobalt precursor because of its high vapor pressure and volatility, a liquid state and its excellent thermal stability under normal conditions. Furthermore, the cobalt film was also deposited at various $H_2/NH_3$ gas ratio(1, 1:1,2,6,8) producing pure cobalt thin films with excellent conformality. Compared to MOCVD cobalt using $H_2$ gas as a reactant, the cobalt thin film deposited by MOCVD using $H_2$ with $NH_3$ showed a low roughness, a low resistivity, and a low carbon impurity. It was found that Co/$TaN_x$ film can achieve a low resistivity of $90{\mu}{\Omega}-cm$, a low root-mean-square roughness of 0.97 nm at a growth temperature of $150^{\circ}C$ and a low carbon impurity of 4~6% carbon concentration.

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.299-306
• /
• 1991

When $[U-^{14}C]$ 3,3', 4,4'-tetrachloroazobenzene$([U-^{14}C]\;TCAB)$ was added to the $MM_2$ medium as a sole carbon source for the isolated microorganisms and incubated, some radioactive metabolites were detected by autoradiography. No $^{14}CO_2$ was evolved from $[U-^{14}C]\;TCAB$ which was added as a sole carbon source to an organic matter-free soil inoculated by the isolates, wetted with the $MM_2$ salt medium, and incubated at $30^{\circ}C$. One of the metabolites in pure culture of Achromobacter group VD, which was isolated and identified, was tentatively identified as a compound of m/z 250 by means of GC/MS. The possible pathways for its formation are thought to include dechlorination from the TCAB structure, hydroxylation, ortho fission of the two benzene rings, and reduction of the resulting carboxyl group.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.61-69
• /
• 1995

It is hard to synthesize pure $BaTiO_3$ from $BaCO_3$ and $TiO_2$ in solid reaction for the activity of BaO and secondary phase. For this reason, the wet chemical techniques have been studied. Starting material which was used in these methods were expensive and the properties of powder which was synthesized in same defined. So, some process have been studying again to improve soild reaction method. This study which was one of those was to defin the forming mechanism of $Ba_2TiO_4$ and to control some condition of $Ba_2TiO_4$. The synthesis temperature of $BaTiO_3$ in solid reaction was near $1120^{\circ}C$. The quantity and forming temperature of $Ba_2TiO_4$ could be controlled by atmosphere heat treatment. $Ba_2TiO_4$ was related to expansion in Ba-rich region of $BaTiO_3$. $BaTiO_2O_5$ and $BaTiO_3O_7$ was reason to expand in Ti-rich region. The dielectrics of $CeAIO_3$ which was synthesized and sintered in reduction atmosphere and $BaTiO_3$ system were affected by $CeO_2$ which was formed for the decomposition of $CeAIO_3$ heat treatment in air.

• Clean Technology
• /
• v.21 no.4
• /
• pp.241-247
• /
• 2015

Oyster shells are a waste product from mariculture that creates a major disposal problem in coastal regions of southeast Korea. To make practical use of unused oyster shells, calcined oyster shell (COS) collected from a local company was allowed to adsorb AITC (allyl isothiocyanate), and then tested the powder's ability to inhibit the growth of some potential food borne disease-causing bacteria. COS powder showed bacteriostatic effect that inhibited cell growth of Escherichia coli, Staphylococcus aureus and Salmonella typhimurium from 3 to 5 log10 CFU/mL at concentrations around 1%. The MIC of pure AITC was found as 1 mg/mL, 0.8 mg/mL and 0.7 mg/mL for Escherichia coli, Staphylococcus aureus and Salmonella typhimurium, respectively. The calcined powder adsorbed about 225 mg of AITC per gram of shell, indicating porous material was created by calcination. FTIR data confirmed the adsorption of AITC by COS. Characterization of particle data showed very fine particle size and highly convoluted surface. AITC adsorbed calcined oyster shell (ACOS) completely inhibited bacterial cell at 1% concentration. ACOS showed better antibacterial effect than COS, indicating synergistic effect of AITC and calcined oyster shell powder on bacteria.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.757-763
• /
• 2006

In our previous studies, we have isolated bacteria from BTEX-contaminated sediment, which utilized BTEX as a sole carbon source and $NO_3$-N as an electron acceptor. For the possibility of field application, we have applied co-culture of those isolates in the BTEX-contaminated soil and evaluated their biodegradation efficiencies. To investigate the relationship between the isolates and indigenous microorganism in soil, changes of microbial community structure in soil samples with respect to time were monitored. To examine this, soil samples were artificially contaminated with benzene, toluene, ethylbenzene and o-xylene. BTEX-degrading bacteria such as Pseudomonas stutzeri strain 15(DQ 202712), Klebsiells sp. strain 20(DQ 202715) and Citrobacter sp. strain A(DQ 202713) were injected into the soil samples in the ratio of 2:1:1. Our results showed that the highest BTEX biodegradation efficiency was achieved when both BTEX and $NO_3-N$ existed simultaneously. The change in soil microbial community structure was characterized by PCR-DGGE analysis comparing the relative DGGE band intensities. The band intensities of indigenous microorganisms in the soil were reduced by injecting co-culture of the three isolates. On the contrary, the relative band intensities of the isolates were increased. Among the three isolates, Pseudomonas stutzeri strain 15 rendered the highest band intensity. This indicates that the Pseudomonas stutzeri was the dominant microbial species found in the soil samples.

• Journal of Mushroom
• /
• v.11 no.3
• /
• pp.159-163
• /
• 2013

We made the first Korean white commercial strain 'Baek-a' developed by crossing between monokaryons derived from brown strains. This variety can be estimated as the Korea's indigenous one different from the origin of Japanese white ones. The optimum temperature of mycelial growth was $25^{\circ}C$ but it needed to adjust to $18{\sim}20^{\circ}C$ when incubated at the bottle cultivation. The optimum temperatures of fruiting body initiation and development were $12{\sim}13^{\circ}C$ and $67^{\circ}C$, respectively. Fruiting body of 'Baek-a' was pure white even developed from crossing with brown strains. 'Baek-a' was a good variety with high quality and high productivity characterized as quite even budding habit, long stipes and hemi-spherical pilei. The days for the fruiting was 7 days and the productivity was $111{\pm}34$ g per 850 ml. This variety needed high concentration of carbon dioxide and it had to be adjusted up to 4,000 ppm for the good quality.

• Korean Journal of Microbiology
• /
• v.44 no.4
• /
• pp.352-357
• /
• 2008

We evaluated cultivation methods to obtain pure cultures of previously uncultivated bacteria from soil. Soil bacteria (suspensions) were inoculated onto various oligotrophic media with one of the following additives: 1) soil extract; 2) anthraquinone disulfonate (humic acid analogue); 3) acyl homoserine lactones (quorum-signaling compounds); 4) catalase (for the protection of bacteria from exogenous peroxides). After the relatively long period (60 days) of incubation with elevated concentrations of $CO_2$ (5%, v/v), the media containing catalase showed the highest colony count. We purified 147 randomly selected colonies from the media and the isolates were subjected to the phylogenetic analyses of their 16S rRNA gene sequences. Phylogenetic analysis revealed that approximately 30% of the isolates might belong to novel species or novel family, suggesting that the media and incubation conditions used could be useful for the cultivation of as-yet-uncultured bacteria. Especially, bacteria belonging to the phylum Acidobacteria, ubiquitous bacterial taxon known as an uncultured bacterial group (at least difficult to culture from environmental samples), were successfully cultured in this study.

• Journal of Sensor Science and Technology
• /
• v.7 no.4
• /
• pp.254-262
• /
• 1998

Multilayer Langmuir-Blodgett (LB) films coated on quartz crystal microbalance (QCM) of octa-substituted metallophhtalocyanines ($MPc(OEH)_8$, M = Cu, Co, and Sn) and dihydrogen phthalocyanines ($H_2Pc(OEH)_8$) were used to quantify $NO_2$ concentrations. They were exposed to various concentrations of $NO_2$ in dry $N_2$. Among the four phthalocyanines we tested, the metal-free $H_2Pc(OEH)_8$ was observed to be most sensitive to $NO_2$. However, its LB film showed a partially irreversible behavior, that is part of the frequency change due to $NO_2$ adsorption could not be recovered even after purging with pure $N_2$ gas for an extended period. Examining the spectra of NMR and FTIR revealed fact that the irreversible portion of frequency change was due to ether groups in the linkage between side chains and the Pc unit. In order to remove the effect of such initial deactivation, on $NO_2$ quantification experiment, a freshly fabricated LB film was treated at a high concentration of $NO_2$ so that the ether sites were saturated. A pretreated LB film showed a reproducible performance for repeated uses. The $CuPc(OEH)_8$ LB film showed a satisfactory sensing performance down to as low as 4 ppm. For the $H_2Pc(OEH)_8$ LB film, the lower detection limit was found to be 35ppb of $NO_2$. In order to make the experimental condition more realistic, the carrier gas, dry nitrogen, was replaced by air. It was observed that the presence of oxygen, a weak electron acceptor, reduced the sensitivity and thus increased the sensing limit to hundreds of ppb. Results of experiments with moisture added showed that the interference of moisture was quite severe.