• 제목/요약/키워드: Pumping Rate

검색결과 378건 처리시간 0.035초

침심 노즐전극의 전기유체역학적 펌핑 특성 (Electrohydrodynamic Pumping Characteristics of the Needle-Centered Nozzle Electrode)

  • 정회원;문재덕
    • 전기학회논문지
    • /
    • 제57권10호
    • /
    • pp.1812-1817
    • /
    • 2008
  • A cooling system for microelectronics is becoming more important as its surface heat density is projected to reach that of the sun surface. The existing technologies using natural and forced convection are limited to solve the problems. Recently, an electrohydrodynamic driven flow is studied as one of the means to cope with this problems. A new method, utilizing a needle-centered nozzle electrode, has been proposed and investigated. The I-V characteristics of the nozzle electrode for deionized water and silicone oil were significantly different from that of without liquid, which might be due to the liquid drop covered on the nozzle tip by the EHD force acting near the needle tip. Results showed that the liquid pumping rate and flow efficiency of the nozzle electrode were very high, especially for the silicone oil. Theoretical analysis also showed the effectiveness of the needle electrode centered in the ceramic nozzle, which, however, can be a means as a liquid pump.

압전식 구동기를 이용한 양방향 마이크로 펌프의 성능에 관한 연구 (A Study on the Performance Characteristics of a New Bi-directional Micropump Using Piezoelectric Actuator)

  • 최종원;윤재성;김민수
    • 대한기계학회논문집B
    • /
    • 제30권4호
    • /
    • pp.350-357
    • /
    • 2006
  • A new valveless micropump for bi-directional application has been developed and tested. The micropump was fabricated on silicon and glass substrates by micromachining process. The micropump in this study consists of a membrane actuator, a pumping chamber, fluidic channels and two piezoelectric ceramic films. The channels and pumping chamber were etched on a glass wafer and the membrane was made on a silion wafer which is actuated by a piezoelectric ceramic (PZT) film. The geometry of the micropump was optimized by numerical analysis and the performance of the micropump was investigated by the experiments. The maximum flow rate was $323{\mu}L/min$ and the maximum back pressure was 294 Pa when the membrane actuator of $10{\times}10mm^2$ was driven at 130 Hz and 385 V.

대형 수이젝터를 이용한 다목적댐 관개용수 펌핑시스템에 관한 연구 (A study on the irrigation water pumping system of multipurpose dams by the large water ejector)

  • 윤석훈;오철;손근홍;김철환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제18권1호
    • /
    • pp.73-80
    • /
    • 1994
  • The water ejector is a low pressure high flow rate volumetric pump. It utilize the energy of a low mass flow, high velocity stream to induce a large mass flow, low velocity stream. In addition, it has a very good resistances to cavitation compared to the other type of pumps, and the maintenance cost is practically nil. There has been enormous energy loss to supply the upper part water of dam which has large potential energy as mere irrigation water in domestic multipurpose dam. The new type of energy saving system which developed through the present study can economizes over 950,000 kWh per year by mixing the upper part water of dam with the waste water by the large water ejector. This paper estimates the economical efficiency of the new type of irrigation water pumping system, and further more, represents the change of performance characteristics of large water ejector, which was adapted to this system, according to the fluctuation of upper water level that seasonally changes.

  • PDF

Submicron MOS 트랜지스터의 뜨거운 운반자에 의한 노쇠현상 (Hot-Carrier-Induced Degradation in Submicron MOS Transistors)

  • 최병진;강광남
    • 대한전자공학회논문지
    • /
    • 제25권7호
    • /
    • pp.780-790
    • /
    • 1988
  • We have studied the hot-carrier-induced degradation caused by the high channel electric field due to the decrease of the gate length of MOSFET used in VLSI. Under DC stress, the condition in which maximum substrate current occures gave the worst degradation. Under AC dynamic stress, other conditions, the pulse shape and the falling rate, gave enormous effects on the degradation phenomena, especially at 77K. Threshold voltage, transconductance, channel conductance and gate current were measured and compared under various stress conditions. The threshold voltage was almost completely recovered by hot-injection stress as a reverse-stress. But, the transconductance was rapidly degraded under hot-hole injection and recovered by sequential hot-electron stress. The Si-SiO2 interface state density was analyzed by a charge pumping technique and the charge pumping current showed the same trend as the threshold voltage shift in degradation process.

  • PDF

LNG 배관 시스템용 1인치 글로브 밸브 개발 및 성능실험 (Development and Performance Test on the 1-Inch Glove Valve for the LNG Piping System)

  • 이중섭;이치우
    • 한국기계가공학회지
    • /
    • 제16권1호
    • /
    • pp.9-16
    • /
    • 2017
  • This study describes the development of a 1-inch cryogenic glove valve for an LNG pumping system and localization development achieved through the performance test. The cryogenic valve used in the LNG pumping system plays an important role in maintaining a flow rate by LNG transportation. This trial manufactured goods, which was achieved through reverse engineering and developing the assembly process. The result of the leak test satisfied the internal pressure condition using the 78-bar normal temperature test and maintained the anti-leakage condition. Also, the result of the cryogenic leak test (BS 6364: low temperature test procedure) maintained anti-leakage at -196 and 52 bar, which satisfied the test standards.

Simulation for the effect of vertical groundwater flux on the subsurface temperature distribution

  • 신지연;이강근
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
    • /
    • pp.383-386
    • /
    • 2006
  • Subsurface temperature is affected by heat advection due to groundwater advection. Temperature-depth profile can be perturbed especially when there are significant vertical groundwater flux caused by external force such as injection or extraction. This research is to clarify the change of subsurface temperature distribution when the 40m x l0m sandy aquifer is stimulated by two different vertical flux($case1:\;{\pm}10^{-5}m^3/s,\;case2:\;{\pm}4{\times}10^{-5}m^3/s$) using a program called HydroGeoSphere. The resulting temperature distribution contour map shows pumping causes vertical attraction of water from deeper and warmer place which result in rising up isotherm. Additionally more injection/extraction rate, more vertical groundwater flux leads to faster Increase in temperature near the pumping well.

  • PDF

Comparative Measurement of Transverse Nuclear Magnetization of Polarized 129Xe and 131Xe by Spin-exchange Optical Pumping

  • Yu, Ye Jin;Min, Seong Ho;Moon, Han Seb
    • Current Optics and Photonics
    • /
    • 제4권6호
    • /
    • pp.466-471
    • /
    • 2020
  • We analyze the transverse nuclear magnetizations of 129Xe and 131Xe in a vapor cell containing natural Xe, 87Rb, and buffer gases. Th e Xe atoms are polarized th rough spin-exch ange optical pumping (SEOP) with Rb atoms under low-magnetic-field conditions. From the free-induction-decay (FID) signal, we measure the nuclear magnetization of the Xe atoms in the Xe-Rb vapor cell. Furthermore, we measure the dependence of the gyromagnetic ratio on the magnetization of 129Xe and 131Xe by examining the amplitude of the FID signal of each isotope, and we evaluate the relationship between the magnetic field gradient and transverse relaxation rate for both of the 129Xe and 131Xe isotopes.

물수지분석 기법에 의한 양수장 몽리구역내 농업용수 회귀율 연구 (A Study on Return Flow Ratio of Irrigation for a Paddy Field in Pumping Station by Water Balance Method)

  • 추태호
    • 한국수자원학회논문집
    • /
    • 제37권3호
    • /
    • pp.249-255
    • /
    • 2004
  • 농업용수 회귀율을 조사하기 위하여 2003년 관개기 동안 많은 실측을 수행하였다. 본 연구지역은 경상남도 창녕군에 위치한 대암양수장 유역일원이다. 관개용수를 공급하기위하여 건설된 대암 양수장 유역 내 논에 대하여 물수지분석을 실시하였다. 본 연구지역에서의 일 강우량 자료를 수집하였으며, 또한 관개율, 배수율, 침투 및 증발산을 실측하였다. 관개량과 배수량은 기록형수위계(GTDL-L10)를 설치하여 관계기 동안 지속적으로 관측하였다 침투 및 증발산은 직경 3mm PVC 감수심계 및 직경 200mm PVC 침투계를 이용하여 측정하였다. 총관개량 및 총 지표배수량은 654.7mm와281.2mm로 나타났으며, 총 침투량과 총증발산량은 각각 36.0mm 및 160.0mm였고, 일평균 증발산량은 4.3mm/d 였다. 신속회귀율과 지연회귀율은 각각 43.0% 및 5.5%로 전체회귀율은 48.5 %로 나타났다. 따라서, 본 시험지구에서 공급된 관개용수량이 설계기준보다 훨씬 많은 양의 관개용수를 공급하고 있음을 알 수 있었다. 이는 적정한 용수관리원칙 보다는 지역주민들의 요구에 의한 과다공급으로 인한 부적적한 용수관리에 기인하는 것으로, 추후에 농업용수설계기준을 현실에 맞게 변경해야함을 의미한다.

현장실증시험에 의한 단일 및 이중필터층 우물의 해수 여과 특성 연구 (A Study on the Seawater Filtration Characteristics of Single and Dual-filter Layer Well by Field Test)

  • 송재용;이상무;강병천;이근춘;정교철
    • 지질공학
    • /
    • 제29권1호
    • /
    • pp.51-68
    • /
    • 2019
  • 국내에서는 바닷가 주변의 상가나 수협 등의 활어 위판장 등에 많은 양의 해수가 사용되고 있다. 이러한 해수는 기상악화나 태풍 등에 의해 관련시설이 수시로 파손되고 조기 폐색되어 시간적, 경제적 비용이 많이 소요되고 있는 실정이다. 또한 오염된 해수가 그대로 유입되는 경우가 많아 환경적인 문제를 야기하기도 한다. 본 연구는 직접적인 해수취수의 대안으로 이중필터취수정을 적용한 해변여과 방식의 해수취수 적용성을 평가하고자 수행하였다. 본 연구에서는 토층으로 이루어진 해변의 자유면대수층에서 필터조건을 달리하여 실규모의 이중필터취수정과 단일필터취수정을 각각 설치하고 설치된 우물에서 단계 및 연속대수성시험을 실시하여 필터재 조건에 따른 투수특성 및 적정양수량을 평가하였다. 단계대수성시험 분석결과 이중필터 취수정에서 우물 개량의 정도가 양호하여 단일필터 대비 110.3%의 투수계수 상승효과가 발생하는 것으로 분석되었다. 동일 양수량 대비 이중필터의 투수계수가 높게 나타나며, 이는 이중필터가 단일필터에 비해 투수성이 개선된 영향으로 판단된다. 연속대수성시험 분석결과 관측정 및 양수정을 이용한 투수계수 분석에서 이중필터취수정(SD1200)이 단일필터취수정(SS800)에 비해 높은 투수특성을 나타내는 것으로 평가되었으며, 이중필터가 단일필터 대비 평균 110.7%의 투수계수 상승효과가 발생하는 것으로 분석되었다. 수위강하량 분석을 통한 양수량 평가결과, 수위강하 2.0 m일 때 이중필터 취수정이 단일필터 취수정 대비 122.8% 양수량이 증대되는 것으로 분석되었으며, 비수위강하량을 이용하여 적정양수량을 산정한 결과 이중필터취수정이 단일필터취수정에 비해 136.0% 높은 양수량을 보이는 것으로 분석되었다. 또한 변곡점을 이용한 양수량 평가결과 이중필터가 단일필터에 비해 160.0% 높은 적정양수량을 보이는 것으로 분석되었다. 적정양수량의 경우 분석방법에 따라 단일필터 대비 122.8~160.0%의 개선효과가 있는 것으로 평가되었으며, 이를 평균한 단일필터 대비 이중필터의 양수량 개선율은 139.6%이다. 즉, 이중필터 설치만으로 일반적인 우물 대비 취수효율이 40% 정도 개선될 수 있음을 확인하였다. 변곡점을 이용한 이중필터취수정의 적정양수량은 2843.3 L/min로써 이중필터취수정 단일공의 일 해수취수량은 약 $4,100m^3/day$ (${\fallingdotseq}4094.3m^3/day$)에 달하는 것으로 평가되었다. 이와 같이 공당 다량의 취수가 가능하기 때문에 해수취수의 적용성이 높을 것으로 기대된다. 또한 이중필터취수정을 이용하여 해수취수를 수행하는 경우 기존에 문제시되었던 기상악화나 태풍 등에 의한 파손우려를 해소할 수 있으며, 해변의 모래층이 필터재 역할을 하여 오염정도를 개선하는 효과가 있을 것으로 기대된다. 따라서, 기존 해수취수기술에 대한 환경적인 문제 해결의 대안이 될 수 있고, 설치비용 및 파손등과 관련된 장기적인 유지관리비용 면에서도 유리하여 경제적 측면에서 그 적용성이 매우 높을 것으로 판단된다. 본 연구의 결과는 추후 수행예정인 이중필터취수정의 강변여과수 적용을 위한 현장실증시험의 기초자료로 활용될 예정이며, 그 결과를 종합하여 강변여과 및 해변여과기술과 관련된 우물의 설계 및 시공에 대한 표준화된 기준을 제시할 수 있을 것으로 기대된다.

Vacuum Characteristic of a Chamber Made of Mild Steel

  • Park, Chongdo;Ha, Taekyun;Cho, Boklae
    • Applied Science and Convergence Technology
    • /
    • 제24권4호
    • /
    • pp.84-89
    • /
    • 2015
  • The base pressure and outgassing rate of a mild steel chamber were measured and compared to those of a stainless steel chamber. A combined sputter-ion and non-evaporable getter pump with a nominal pumping speed of 490 l/s generated the base pressure of $2.7{\times}10^{-11}$ mbar in the mild steel chamber and $1.2{\times}10^{-10}$ mbar in the stainless steel chamber. The rate-of-rise measurements show that the mild steel has an extremely low outgassing rate of $2.6{\times}10^{-13}$ mbar $ls^{-1}cm^{-2}$, which is about one-order of magnitude smaller than the outgassing rate of the stainless steels. Vacuum annealing of the mild steel at $850^{\circ}C$ reduced the outgassing rate further to $8.8{\times}10^{-14}$ mbar $ls^{-1}cm^{-2}$, which was comparable to the outgassing rate of a heat treated stainless steel for extreme-high vacuum use.