• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.776-781
• /
• 2001

Internal pipes technology for LNG Storage tank developed because of the perceived safety risk of having an opening near the base of the shell. This is because the shell at this point is the most highly stressed component of the primary containment. other, secondary, problems arise because the movement of the tank in this region is also at a maximum. This requires the use of bellows either in the interspace or on the outside of the outer tank. Therefore the internal pipe, through the roof, solves these problems. The loading conditions calculated from design concept are then used to perform a pipe stress analysis. As well as determining the stresses in the internal pipe and checking against allowable stress, it determines the reaction forces at the support positions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1020-1025
• /
• 2001

Vertical canned pumps are usually applied in the power plant to transport fluids that the available suction pressure is low at the condensate system and the circulating-water system. The top of the motor driver is 5.5m above the base and the barrel and drop column extend even further below the ground. While this size and configuration may produce an efficient pumping system, it also introduces several dynamic problems which must be considered in order to obtain a reliable operation. The main problem is that the vibrational mode of the long flexible cantilever structure above the ground exist near the operational characteristics of the condensate debris system. This system's trouble has been showed at 2,086 hp condensate water loading pumps in a nuclear power plant.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1227-1233
• /
• 2004

Air handling unit (AHU)'s air filter pressure difference is important for energy consumption and indoor air quality. Both energy Performance data and air filter differential pressure of AHU in real office buildings were monitored and analyzed to investigate quantitatively energy impact as dust buildup level on air filter grows. We also modeled and simulated CAV system using HVACSIM＋ program to examine the energy effect of dust buildup on filters. Through analysis of time series pressure drop data, the filter pressure difference rate has been increased due to cumulative supply air flow rate increase. As filter pressure drop increased to 1 inch water column, it is found that the supply air flow rate was decreased by 10%, the chilled water flow rate was increased by 5.9% and the pump energy consumption was increased to 5.9%.

• 한국양식학회지
• /
• 제13권3호
• /
• pp.267-275
• /
• 2000

이 연구는 값싸고 높은 비 표면적을 제공할 수 있는 발포스티로폼 입자를 packed column 에어레이터의 산소전달 매질로 이용 가능성을 알기 위하여 매질의 깊이와 수리학적부하량에 따른 산소 전달 특성과 효율을 조사 하였다. 이용된 발포스티로폼 입자는 직경 2.5 mm의 구형이었으며, 비표면적이 1350 $m^2$/$m^3$으로 일반적으로 이용되는 매질에 비해 약 3.7~7.0배 더 넓은 비표면적을 제공할 수 있다. 이 매질을 직경 10 cm, 높이 1 m의 내부 관찰이 용이한 아크릴 관으로 제작한 packed column 에어 레이터에 0, 4.5, 9그리고 18 cm의 매질을 채워 넣고, 수온 20, 25 및 3$0^{\circ}C$에 대해 수리학적 부하량을 2, 4 및 5.6 $m^3$/$m^2$/min로 각각 달리하여 산소전달특성을 실험한 결과(Exp. 1),모든 실험 수온에서 수리학적 부하량이 증가함에 따라 표준산소전달률이 증가하였으나 매질의 깊이는 9 cm 까지는 증가하다가 18 cm에서는 감소하였다. 표준산소전달률은 매질 깊이 9 cm에서 수리학적 부하량이 5.6 $m^3$/$m^2$/min일 때 가장 높았다. 그러나 수리학적 부하량이 증가함에 따라 펌프의 소모 전력이 증가하여, 단위소모 전력당 표준에어레이션 효율은 매질의 깊이 9 cm에서 수리학적부하량 2 $m^3$/$m^2$/min일 때 가장 높았다. 따라서 모든 수리학적 부하량에서 매질의 깊이 9 cm 일 때 표준산소전달률과 표준에어레이션 효율이 가장 좋았다. 이 매질을 직경 20 cm, 높이 2 m의 PVC관으로 제작한 packed column 에어레이터에 깊이를 0, 9, 18, 27 및 36 cm로 넣고 순환여과식 시설 내에 실험실 규모의 적용실험을 통해 에어레이터의 효율을 조사하였는데 (Exp.2), 실험 수온 27$^{\circ}C$에서, Exp. 1에서와 동일한 3개의 수리학적 부하량에서 산소 전달률을 측정한 결과, Exp. 1에서와 같이 수리학적 부하량과 매질의 깊이의 증가에 따라 산소 전달률이 증가하였으며, 매질의 깊이가 가장 깊은 36 cm에 대해, 수리학적 부하량이 2 $m^3$/$m^2$/min 일때, 2 kg 02 kg $O_2$/kW-hr의 가장 높은 표준에어레이션효율을 나타내었다. 위의 두 실험 결과에 따라 packed column 에어레이터에서 발포스티로폼 입자를 산소전달 매질로 이용하여 산소 전달률을 증가시킬 수 있다는 것을 확인할 수 있었다.

• KSBB Journal
• /
• 제15권4호
• /
• pp.388-392
• /
• 2000

한지자숙폐액을 이용한 Saccharomyces cerevisiae의 배양에 서 glucose의 자동분석 및 첨가에 의해 균농도를 증가시킴으로써 폐액의 재이용성을 향상시키파 하였다 배양액의 glucose를 자동분석하고 자동첨가하기 위하여 ceramic sampler, sampling, ralve, injection valve, glucose oxidase column, debubbler, flow cell과 백금전극, potentiostat, computer와 interface card, 및 tubing pump블로 구성된 glucose 자동분석 및 첨가시스템을 제작하였으며, glucose의 자동분석에는 glucose oxidase를 이용한 on-line FIA법을 채택하였다. 효모의 배양중 glucose자 동분석 및 첨가시스템을 사용하여 glucose를 자동첨가한 결과 배양액의 포도당농도가 $176{\pm}31 mg/L$ 의 낮은 농도로 제어 되었으며, glucose와 $>(NH_4)_2S0_4$의 첨가에 의해 총균수가 3.1 배 증가하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.253-256
• /
• 2009

350Kw급 이하의 초소형 터보제트엔진에서 연료 미립화 특성을 만족하는 분사시스템을 개발하는 것은 매우 어려운 일이다. 그러나 회전 연료 분사시스템은 복잡한 고압연료펌프 시스템 없이도 엔진축의 원심력만을 이용함으로써 좋은 미립화를 할 수 있다. 이러한 이유로, 직경 40 mm의 매우 작은 회전식 연료 인젝터를 제작하였으며, 여러 가지 크기의 분사 오리피스에 대한 실험을 수행하였다. PDPA 측정 시스템을 사용하여 입자의 크기와 속도, 분무분포를 측정하였다. 실험 결과, 분사 오리피스로부터 분출된 단일 액주의 길이는 회전속도에 의해 제어되며, SMD는 회전수가 증가함에 따라 감소하고, 오리피스의 직경과 오리피스 내부에 생성되는 액막두께에 큰 영향을 받는다.

• 한국임상약학회지
• /
• 제18권2호
• /
• pp.120-123
• /
• 2008

The purpose of this study was to investigate the effect of naringin, one of flavonoids, on the pharmacokinetics and bioavailability of nimodipine in rabbits. Pharmacokinetic parameters of nimodipine were determined in rabbits after oral administration of nimodipine (16 mg/kg) with or without naringin (1, 5 or 15 mg/kg). Nimodipine was analyzed by high performance liquid chromatography using Hypersil ODS column. Naringin significantly (p<0.05) increased the area under the plasma concentration-time curve (AUC) and the peak concentration ($C_{max}$) of nimodipine at 5 and 15 mg/kg. The absolute bioavailability (AB%) of nimodipine by prescence of naringin (5 or 15 mg/kg) increased from 32.2-36.9% (p<0.05) compared to the control (22.0%). However, presence of naringin had no significant effect on the elimination rate constant ($K_{el}$) of nimodipine. There were no apparent changes of the time of peak concentration ($T_{max}$) of nimodipine by coadministration. These results suggest that the increased bioavailability and the significant changes of these pharmacokinetic parameters of nimodipine by naringin may be attributed to the potential of narigin to inhibit cytochrome P450 (CYP) 3A4 and P-glycoprotein efflux pump in the liver and intestinal mucosa.

• 한국환경과학회지
• /
• 제19권12호
• /
• pp.1447-1454
• /
• 2010

In this study, the detection limits of lower fatty acids in air were investigated by using Dynamic SPME(Solid Phase Micro-Extraction), i.e. improved Head Space - SPME method(HS-SPME). This Dynamic SPME, called SPDE(Solid Phase Dynamic Extraction), is the analytical method for volatile compounds in air with the extraction by using a stainless steel needle of which inner surface is coated with adsorption material and following the gas chromatographic analysis by inserting the needle into a injection port of GC and subsequently, desorption of the volatile compounds into a gas-chromatographic column. Extraction was carried out by passing the sample air through the needle with a suction pump which has been used for a detection tube. The result of measurement for the 6 lower fatty acids showed that the detection limits ranged from 0.10 ppm to 0.44 ppm and the linear correlation coefficients were over 0.99. Relative standard deviations obtained from 5 analytical repetition of a ca. 1.6 ppm standard mixture were in the range of 1.87%~2.47%. This method has been shown to be a adequate for the measuring C2~C5 fatty acids in air in the concentrations of over several hundreds ppb.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1483-1488
• /
• 2005

As the development of microprocessor technology, electric power steering(EPS) system which uses an electric motor came to use a few years ago. It can solve the problems associated with hydraulic power steering. The motor only operates when steering assistance is needed, so it can save fuel and can reduce weight and cost by eliminating hydraulic pump and piping. As one of performance criteria of EPS systems, the transmissibility from road wheel load to steering wheel torque is considered in this paper. The transmissibility can be studied by fixing the steering wheel and calculating the torque needed to hold the steering wheel from road wheel load. A proportion-plus-derivative control is needed for EPS systems to generate desired static torque boost and avoid transmissibility of fluctuation. A pure proportion control can' satisfy both requirements.

• 한국환경과학회지
• /
• 제13권7호
• /
• pp.703-710
• /
• 2004

Petroleum refineries have been considered as an important emission source for atmospheric volatile hazardous air pollutants(HAPs). The emission source includes petroleum refinery processes and process equipment. The control strategy for volatile HAPs requires emission estimations of these pollutants. However, systematic methods of volatile HAPs emission from petroleum refineries have not yet been established. Accordingly, present study surveyed the estimation method of volatile HAPs emitted from the petroleum refinery processes and process equipment. The emission estimation methods for the petroleum refinery processes are applied for 11 petroleum refining facilities: fluidized catalytic cracking, thermal cracking, moving bed catalytic cracking, compressed engine, blowdown system, vacuum distilled column condensator, natural gas or distilled boiler, natural gas or distilled heater, oil boiler, oil heater and flare. Four emission estimation methods applied for the petroleum refinery process equipment are as follows: average emission factor approach, screening ranges approach, EPA correlation approach and unit-specific correlation approach. The process equipment for which emission factors are available are valves, pump seals, connectors, flanges and open-ended lines.