• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.804-807
• /
• 2012

본 논문에서는 펄스 레이저(LASER) 송신기에서 방사되는 펄스신호를 레이저 감시 시스템에서 실시간으로 수신하여 수신된 레이저 펄스들의 변화 패턴, 특히 Dual & Switch 신호의 패턴을 분석하는 방법에 대하여 기술하였다. Dual & Switch 신호는 펄스반복시간이 주기적으로 변경되어 펄스 패턴을 예측하기가 매우 어렵다. 본 논문에서는 펄스반복간격(PRI)의 차분을 이용하여 고정, 지터, Dual & Switch 신호의 패턴을 확인하는 방법을 제안하였다. 제안된 방법은 Dual & Switch 신호에 대한 신호 식별능력이 가능하여 레이저 감시시스템 등에 사용할 수 있을 것으로 판단된다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.1
• /
• pp.101-106
• /
• 2004

The phenomenon of PD(Partial Discharge) is accompanied by electromagnetic wave which can be detected by UHF(Ultra High Frequency) antenna. The signals obtaining from UHF antenna are very high rapid pulse and have wide band frequency responses. The distribution of PRPD(Phase Resolved Partial Discharge) which consisted of those pulse train can show distinct characteristics of PD sources. But it is not sufficient to discriminate among PD sources. This paper suggests that the stochastic parameters formed by preprocessing of STFT(Short Time Fourier Transform) are good tools for differentiate from PD sources. The stochastic parameters are CC(Cross Correlation) mean value, CC standard deviation, CC skewness, CC kurtosis.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.456-460
• /
• 1999

Experimental studies of laser micromachining on Mo diaphragm using piezo Q-switched Nd:YAZ laser have been performed. Application of miniaturized micorcolumn electron gun arrays as a potential electron beam lithography or portable mini-scanning electron microscope (SEM) application have recently extensively examined. The conventional microcolumn fabrication technique would give a limitation on the minimization of aberration, In this paper, we obtained 20~30 $\mu \textrm m$aperture of laser micromachining on Mo diaphragm using piezo Q-swithed Nd:YAG laser. The geometrical figures, such as the diameter and the preciseness of the drilled aperture are dependent upon the total energy of the laser pulse train, laser pulse width, and the diameter of laser spot in addition to the materials-dependent parameters.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.2
• /
• pp.57-64
• /
• 2015

In this paper, we propose structures and power spectral densities of UWB radar transmitters of Short Range Automobile. While the conventional transmitters did not consider interferences from self and other automobiles, the proposed method of this paper can minimize interferences. First, we compare a structure of the proposed method with pulse train and pulse compression method. Then, by using mathematical analysis and computer simulations, we show that the proposed method is superior to others. Also we can set proper parameters in UWB radar's transmitter through the numerical method of mathematical results.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.282-284
• /
• 2006

UV lamp systems have been used for cleaning of display pannels of TFT LCD or Plasma Display Pannel (PDP). However, the needs for high efficient cleaning and low cost made high voltage plasma cleaning techniques be developed and improved. In this paper, 3kW high voltage plasma power supply system was developed for LCD cleaning. The 3-phase input voltage is rectified and then inverter system is used to make a high frequency pulse train, which is rectified after passing through a high-power transformer. Finally, bi-directional high voltage pulse switching circuits are used to generate the high voltage plasma.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.611-615
• /
• 2014

We report high-speed pulse train generation from a relatively low-speed 10-GHz mode-locked laser by means of line-by-line spectral coding. To increase the pulse repetition rate multiplication (RRM) factor, we combine coding schemes for both spectral intensity and phase by placing a simple mask at the coder focal plane. The resulting RRM factor, determined by multiplying the RRM factors of the individual coding schemes, rises as high as 16. To verify the generated pulses, the optical spectra and autocorrelation traces are examined.

• Journal of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.103-109
• /
• 1981

An inexpensive, yet convenient analog storage device was constructed. Sequentially MOSFET-switched 20 sample and holds equipped with a high input impedance preamplifier were parallelly matched to the digitally controlled shift register system in variable speeds up to 3 kHz. To verify its usefulness, square wave train, sinusiodal wave and some electrochemical data, such as fast-scan voltammogram and transient current-time curves of differential pulse polarography were tested.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.166-170
• /
• 2000

A wavelength tunable all-optical clock recovery using a semiconductor optical amplifier in a fiber ring cavity is proposed and demonstrated at the wavelength of 1530 nm to 1570 nm. A synchronized optical pulse train is recovered from 10 Gbps and 30 Gbps randomly generated optical pulse streams with injection locking technique. Also, the system responses to the perturbation and the input average power variation are analyzed by a large-signal model based on time-domain travelling wave equation. ation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8B
• /
• pp.1085-1091
• /
• 2001

이 논문에서는 주기적인 특성을 가진 펄스 열들이 서로 다른 초기 위상을 가지고 수신기에 입력되었을 때 도래시간 차이를 이용하여 펄스 열을 분리하는 방법을 제시하고자 한다. 주기적인 펄스 열을 주파수 관점에서 고찰해 보면 하나의 펄스 열 주파수 값으로 특성 지울 수 있으며 이러한 성질은 다중의 펄스 열이 포함된 신호 환경 하에서도 동일하게 나타난다. 제안된 기법은 기존의 스펙트럼 영역에서 사용된 신호 도래 시간의 지수함수로의 매핑을 대신하여 신호 도래 시간 차이를 이용하였으며 실제 다중 환경에서 나타날 수 있는 신호 성분들의 펄스 열 주파수 추정을 위하여 기존의 방법과 비교함으로써 제시한 방법의 타당성을 검증하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.7 no.1
• /
• pp.79-86
• /
• 2003

A myoelectric signal, under sustained isometric contraction of muscle the modelled as the output of a linear time-varying system whose input is constant number of pulse train. The proposed model considered localized muscle fatigue by metabolic by-products during sustained fatiguing contraction. To characterize muscle fatiguing model of myoelectric signal, We calculated median frequency of generated signal as fatiguing index of muscle during sustained isometric contraction.