• 제목/요약/키워드: Pulse types

검색결과 337건 처리시간 0.028초

OVERVIEW OF KSTAR INTEGRATED CONTROL SYSTEM

  • Park, Mi-Kyung;Kim, Kuk-Hee;Lee, Tae-Gu;Kim, Myung-Kyu;Hong, Jae-Sic;Baek, Sul-Hee;Lee, Sang-Il;Park, Jin-Seop;Chu, Yong;Kim, Young-Ok;Hahn, Sang-Hee;Oh, Yeong-Kook;Bak, Joo-Shik
    • Nuclear Engineering and Technology
    • /
    • 제40권6호
    • /
    • pp.451-458
    • /
    • 2008
  • After more than 10 years construction, KSTAR (Korea Superconducting Tokamak Advanced Research) had finally completed its assembly in June 2007, and then achieved the goal of first-plasma in July 2008 through the four month's commissioning. KSTAR was constructed with fully superconducting magnets with material of $Nb_3Sn$ and NbTi, and their operation temperatures are maintained below 4.5K by the help of Helium Refrigerator System. During the first-plasma operation, plasmas of maximum current of 133kA and maximum pulse width of 865ms were obtained. The KSTAR Integrated Control System (KICS) has successfully fulfilled its missions of surveillance, device operation, machine protection interlock, and data acquisition and management. These and more were all KSTAR commissioning requirements. For reliable and safe operation of KSTAR, 17 local control systems were developed. Those systems must be integrated into the logically single control system, and operate regardless of their platforms and location installed. In order to meet these requirements, KICS was developed as a network-based distributed system and adopted a new framework, named as EPICS (Experimental Physics and Industrial Control System). Also, KICS has some features in KSTAR operation. It performs not only 24 hour continuous plant operation, but the shot-based real-time feedback control by exchanging the initiatives of operation between a central controller and a plasma control system in accordance with the operation sequence. For the diagnosis and analysis of plasma, 11 types of diagnostic system were implemented in KSTAR, and the acquired data from them were archived using MDSpius (Model Driven System), which is widely used in data management of fusion control systems. This paper will cover the design and implementation of the KSTAR integrated control system and the data management and visualization systems. Commissioning results will be introduced in brief.

XLPE 케이블에서 보이드 결함의 부분방전 특성과 위치추정 (Partial Discharge Characteristics and Localization of Void Defects in XLPE Cable)

  • 박서준;황성철;왕국명;길경석
    • 한국철도학회논문집
    • /
    • 제20권2호
    • /
    • pp.203-209
    • /
    • 2017
  • 전력공급의 안정성 및 신뢰도 향상을 위해 각종 전력설비의 예방진단에 관한 연구개발이 활발하다. 가스절연개폐장치와 변압기와 같은 단위 기기의 절연진단기술은 빠르게 발전하고 있으나, 전력케이블에 있어서는 단순히 결함의 유무와 부분방전을 측정할 뿐, 세부적 특성에 대해서는 거의 연구되고 있지 않다. 따라서 본 논문에서는 XLPE 케이블에서 보이드의 크기와 위치에 따른 부분방전 특성과 결함의 위치추정에 관한 연구를 수행하였다. 보이드의 크기 및 위치에 따른 4종의 결함계를 모의하였으며, 부분방전펄스는 주파수 대역 150kHz~30MHz의 고주파변류기로 검출하였다. 실험결과, 도체에 인접한 결함일수록 방전전하량이 크고, 정극성에 비해 부극성의 방전펄스 수가 약 20% 많게 나타났다. 또한 TDR 방법으로 결함위치를 산출하였으며, 50m 케이블에서 1m 이내로 결함의 위치를 추정할 수 있었다.

침진통(鍼鎭痛) 작용에 있어서 시상 후방 층판내핵(속방핵)의 역할 (Role of Posterior Intralaminar Thalamic Nuclei in Acupuncture Analgesia in Rats)

  • 노식;민병일;윤상협
    • 대한한의학회지
    • /
    • 제20권3호
    • /
    • pp.36-44
    • /
    • 1999
  • Objectives: It has been well known that electroacupuncture(EA) has an analgesic effect and there is a pain control system in the central nervous system(CNS). The pain control system is composed of three major nuclei, which are periaqueductal gray(PAG), raphe nuclei, and the pain inhibitory complex located in the spinal cord. It has been suggested that the analgesic effect of EA might be the result of activation of the pain control system in the CNS. However, there may be a possibility that other nuclei are also involved in this pain modulation. Thus, we investigated whether the posterior intralaminar thalamic nuclei (PTIN) are involved in the pain modulation. Methods: To measure the level of pain, the jaw opening reflex (JOR) was used as a pain index. The magnitude of JOR is estimated by averaging the area of 10 successive responses. JOR was evoked by tooth-pulp stimulation with bipolar electrode carrying stimulus with the following parameters: intensity ranging from 420uA to 680ulA, 0.3ms duration of square pulse, and 0.5 Hz. Hapkog($LI_4$) and Taechung ($LR_3$) were the chosen acupoints. The Hapkog point was stimulated ipsilaterally at 5V, 3 Hz, for 15min in total, and the Taechung was stimulated at 2-3 V, 3 Hz, and for a total of 15 or 30 minutes. Different intensities of stimulation were given the PITN; one was given at $300{\mu}A$ and the other was at 500uA. The position stimulated in these nuclei by Paxinos Atlas was AP; from bregma $-4.0{\sim}-4.3mm,\;L; 0.5{\sim}1.8mm,\;D;\;4.8{\sim}6.3mm$. Results: The Hapkog point had a significant analgesic effect (P<0.05). However, the Taechung point had no effect. Both types of stimulation in the PITN did not reveal any analgesic effects. Conclusions: From these results, it was suggested that the posterior intralaminar thalamic nuclei are not involved in the modulation of pain.

  • PDF

감성판별을 위한 생체신호기반 특징선택 분류기 설계 (The Design of Feature Selection Classifier based on Physiological Signal for Emotion Detection)

  • 이지은;유선국
    • 전자공학회논문지
    • /
    • 제50권11호
    • /
    • pp.206-216
    • /
    • 2013
  • 감성은 학습, 행동, 의사결정, 상호대화를 포함한 인간의 일상생활에 중요한 요소이다. 본 논문에서는 시스템의 복잡도를 줄이기 위하여 생체신호로부터 최소한의 중요한 특징만을 추출하여 사용하는 감성 분류기를 설계하고자 한다. 생체신호는 맥파, 피부온도, 피부전도도, 뇌파신호(전두엽, 두정엽)를 사용하였으며, 4가지 감정(보통, 슬픔, 공포, 행복)은 영화 관람을 통하여 유도하였다. 측정한 생체신호로부터 추출한 24개의 특징으로부터 최적의 특징 집합의 결정은 서포트벡터머신 기반 적합도 함수를 사용하는 유전알고리즘을 적용하였다. 최적의 4감정 분류 정확도는 96.4%이었으며, 서포트벡터머신만을 사용하였을 경우보다 17% 높았다. 선택된 최소에러 특징은 맥파 심박변이도의 평균, NN50, 맥파 유도 맥파 전달 시간의 평균, 피부전도도의 평균과 두정엽 뇌파의 ${\delta}$, ${\beta}$ 주파수 대역에너지였다. 실험을 통하여 두정엽 뇌파, 맥파, 피부전도도의 조합이 고정밀 감정 장비에 적합하였으며, 79% 성능을 보인 맥파와 피부전도도의 조합이 간단한 감성장비에 적절하게 적용할 수 있다.

인천지역에서 분리된 황색포도상구균의 분자생물학적 특성 분석 (Molecular Characterization of Clinically Isolated Staphylococcus aureus)

  • 오보영;김정희;공용우;이제만;고종명;김용희
    • 미생물학회지
    • /
    • 제44권4호
    • /
    • pp.305-310
    • /
    • 2008
  • 황색포도상구균은 주요한 기회 감염균으로, 최근 여러 가지 항생제에 내성을 지닌 메치실린 내성 황색포도상구균 Methicillin-resistant Staphylococcus aureus: MRSA)이 늘어나 문제가 되고 있다. 이에 본 연구에서는 인천지역관내 설사환자에서 분리한 장독소 양성인 S. aureus를 대상으로 항생제 감수성시험 및 PCR을 이용한 tsst, eta, etb mecA 유전자 검사를 실시하여 생물학적인 특성을 조사하였고, tsst 양성인 MRSA를 대상으로 Pulse Field Gel Electrophoresis (PFGE)에 의한 유전자형을 분석함으로서 경시적인 분자역학적 특성을 파악하고자 하였다. 그 결과 2,281건의 대변에서 173주의 장독소 양성인 S. aureus를 분리하였으며 A독소와 C독소가 각각 39%, 58%를 차지하는 것으로 나타났다. 항생제 감수성 결과 장독소 양성주는 모두 MRSA였으며, 이중 51%가 tsst 양성인 것으로 나타났고 eta, etb 유전자는 검출되지 않았다. mecA 내성유전자는 MRSA 균주의 97%가 양성으로 나타났다. tsst 양성인 MRSA 88주를 대상으로 PFGE한 결과, 10개의 유형으로 나뉘었으며 그중 A형, H형 및 F형 이 각각 58%, 10%, 9%로 주요한 형으로 나타났다.

화상분석 실험을 이용한 열화된 줄눈콘크리트 포장의 내구성 지수 평가 (The Estimation of Durability Factor of Deteriorated Jointed Concrete Pavement Using Image Analysis Test)

  • 최판길;김용곤;윤경구;권수안
    • 한국방재학회 논문집
    • /
    • 제9권5호
    • /
    • pp.31-38
    • /
    • 2009
  • 본 연구의 목적은 콘크리트 포장의 한 종류인 줄눈콘크리트 포장의 열화정도를 평가하는 것이다. 첫째로, 열화종류를 관찰하기 위하여 콘크리트 포장 육안조사를 실시하였다. 육안조사 결과 콘크리트 포장 파손의 형태는 대부분 줄눈 부위에서 조사되었고, 내구성 균열과 줄눈 파손이 주를 이루는 것으로 나타났다. 둘째로, 육안조사 결과에 기초하여 콘크리트 포장을 양호한 단면(4개소)과 불량한 단면(4개소)으로 구분하여 총 8개소에서 콘크리트 코어시편을 채취하였고, 콘크리트 열화 원인을 콘크리트 코어시편의 초음파 강도추정, 쪼갬인장강도 실험 및 화상분석 실험을 이용하여 분석하였다. 화상분석 실험결과, 총 21개의 시험편에서 Kansas DOT 기준(간격계수 $250\;{\mu}m$이하)을 만족하는 시험편은 단지 2개에 불과했고, 나머지 19개의 시험편의 간격계수는 $250\;{\mu}m$ 이상으로 평가되어 내구성 지수가 매우 낮은 것으로 나타났다. 따라서 조사된 콘크리트 포장의 주 열화 원인은 동결융해작용인 것으로 분석되었다.

호흡 기반 사람과 사물 구분 가능한 FMCW 레이다 신호처리 프로세서의 설계 (Design of FMCW Radar Signal Processor for Human and Objects Classification Based on Respiration Measurement)

  • 이윤구;윤형석;김수연;허성욱;정윤호
    • 한국항행학회논문지
    • /
    • 제25권4호
    • /
    • pp.305-312
    • /
    • 2021
  • 보안 시스템에는 다양한 센서가 사용되고 있지만, 사생활 문제가 논란이 됨에 따라 레이다 센서가 대안으로 제시되고 있다. 그 중 PD (Pulse Doppler) 레이다는 짧은 펄스를 사용함으로써 수신부 복잡도가 증가하는 문제가 존재하나, FMCW (Frequency modulated continuous wave) 레이다는 그러한 제한이 적다는 장점이 있다. 그러나, FMCW 레이다는 2D-FFT (2-dimensional fast Fourier transform)를 사용하므로 기존의 센서에 비해서 상대적으로 높은 복잡도를 가지며, 정지해있는 표적에 대해 사람과 사물을 구분하기 어려운 단점이 있다. 따라서 본 논문에서는 1D-FFT와 위상 변화만으로 호흡 여부를 확인하여 사람과 사물을 구분할 수 있는 레이다 신호처리 프로세서의 설계 및 구현 결과를 제시한다. 제안된 신호처리 프로세서는 Verilog-HDL을 기반으로 설계하여 FPGA 디바이스에 기반하여 구현 및 검증하였다. LUT (Look up table) 6,425개, register 4,243개, 12,288개의 memory bit로 구현하여 92.1%의 정확도로 대상의 호흡 여부를 확인할 수 있음을 확인하였다.

성서에 언급된 채소류에 관한 연구 (A Study on the Vegetables Mentioned in the Bible)

  • 우자원
    • 한국식생활문화학회지
    • /
    • 제22권1호
    • /
    • pp.1-9
    • /
    • 2007
  • This paper is intended to study what kinds of the vegetables are mentioned in the Bible and how they were used in those days. While one hundred and twenty-eight different plants are mentioned in the Bible, there are today 2,384 plant species in modem Israel, most of which have been introduced in recent centuries. These plants obviously did not exist there in biblical times and were only recently introduced from Australia and South America, respectively. This article will study only the vegetables mentioned in the Bible and known to have existed in the old and new testament times. Since the first book devoted exclusively to biblical botany was that of Levinus Lemmens in 1566, the modem systematic study of biblical plants, began with F. Hasselquist, a student of Linnaeus, the founder of modem botany. In 1928, Immanuel Loew approached the subject differently, reviewing all known data pertaining to biblical plants. His work not only discussed biblical plants, but also plants in later Jewish literature, particularly the Talmud. The British scholar G. E. Post provided a broad field study of modem plants in Palestine, Syria, Lebanon, and Jordan. More recent major treatments of the subject include those of A. and H. Moldenke (1952), M. Zohary (1982), N. Hareuveni (1984), and Y. J. Choi(1996). Today, articles on specific biblical plants listed in the Bible can be found in any number of encyclopedias. This study attempts to provide a synthesis of the work of a number of scholars who studied the vegetables and plants mentioned in the Bible. As a preliminary study on the culture of food in the biblical period, this study has focused on the identity and features of the vegetables of the Bible. In only a limited number of instances, because of the paucity of the informations and the broad and generic descriptions of the plants, we can't be certain about the identification of the vegetables named in the Bible. In many instances the traditions established by the Greek, Aramaic, and English translations are helpful, although sometimes they are misleading. This paper subdivides the vegetables into broad areas, the general vegetables and the flavoring herbs. Vegetables formed very important part of the diet in the biblical times. Two main types were used: those whose nutritious seeds could be easily stored and those which were eaten freshly gathered from gardens. Pulse seeds provided a useful source of vegetable protein, while fresh green vegetables were vitamin rich. Pulses could be eaten boiled, or their dried seeds could be ground up into flour and then made into nutritious soups. Fresh vegetables were eaten either raw or lightly cooked, usually by boiling in water. The general vegetables in the Bible are herbs(garden rocket), cucumber(snake cucumber), watermelon, leeks, chicory, and onions. Also the flavoring herbs in the Bible are rue, dill, cummin, black cummin, frankincense, cinnamon, cassia, myrrh, black mustard, coriander, mint, saffron, ginger grass, syrian hyssop, aloes(eagle wood), manna which have the flavor, aroma, and medical values.

PID 알고리즘을 이용한 역 진자 시스템의 자세 제어에 관한 연구 (A Study on Pose Control for Inverted Pendulum System using PID Algorithm)

  • 강진구
    • 한국정보전자통신기술학회논문지
    • /
    • 제16권6호
    • /
    • pp.400-405
    • /
    • 2023
  • 현재 도립진자는 많은 분야에서 연구 중이며 미사일, 로켓, 등의 자세 제어와 2족 보행 로봇 등에 응용되고 있다. 본 연구에서는 256펄스의 로터리 엔코더와 DC 모터를 이용한 회전형 도립진자(Rotary Inverted Pendulum)를 구성하여 회전형 역 진자의 수직 자세 제어를 연구하였다. 비선형 시스템의 경우 복잡한 알고리즘과 제어기가 필요하지만 고전적이며 비교적 간단한 PID(Proportional Integral Derivation)알고리즘을 이용한 제어 방법을 회전형 도립진자 시스템에 적용하였으며 간단하지만 원하는 성능을 높이는 방안을 연구하였다. 본 연구에서 사용된 회전형 도립진자 시스템은 비선형적이고 불안정한 시스템으로 선형화된 모델링에서 마이크로칩 사의 dsPIC30F4013 임베디드 프로세서를 이용한 PID 제어기를 설계 및 구현하였다. 보통 PID 제어기는 하나 혹은 두 가지 이상을 조합하여 설계하며 우수한 제어 성능에 비해 구조가 간단하며 제어 이득 조정이 다른 제어기들에 비해 비교적 쉽다는 장점이 있다. 본 연구에서는 시스템의 물리적 구조를 수학적 방법으로 분석하고 모델링을 통한 회전형 도립진자의 수직 균형을 위한 제어를 실현하였다. 또한 회전형 역 진자를 이용하여 PID 제어기로 제어가 가능한지 시뮬레이션과 실험을 통하여 그 타당성을 검증하였다.

비파괴검사법을 이용한 공동주택 마감재 종류에 따른 콘크리트 압축강도 비교평가 (Comparative Evaluation of Concrete Compressive Strength According to the Type of Apartment Building Finishing Materials Using Nondestructive Testing)

  • 홍성욱
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제28권1호
    • /
    • pp.32-38
    • /
    • 2024
  • 공동주택의 경우 사람의 실거주 및 코어시험 시 일어나는 분진 및 소음 등으로 인하여 비파괴검사를 진행하기 어려워 공용부 및 지하 주차장에서 매번 점검이 이루어지며, 저가 수주로 인한 콘크리트 면의 실험이 아닌 마감재 위에서 실험을 진행하여 부실점검이 발생할 수 밖에 없는 실정이다. 또한 강도 추정을 위한 제안식들은 시험조건과 환경의 차이에 따라 변동폭이 크고, 동일한 측정값을 나타내더라도 제안식 마다 그 편차가 커 정확한 강도 추정이 어려워 사용에 어려움을 겪고 있는 실정이다. 이에 공동주택에 주로 사용되는 마감재를 선정하여 마감재를 제거하지 않고 직접 마감재에 비파괴검사법을 활용하여 마감재 종류에 따른 콘크리트 압축강도 비교 평가를 하고자 한다. 마감재 종류에 따른 초음파속도법을 이용한 콘크리트 추정압축강도 신뢰도 평과 결과는 다음과 같다. 초음파속도법을 통해 도출된 추정압축강도와 압축강도의 오차율은 21.83% ~58.89%로 광범위한 변동폭을 보이며. 추정압축강도에 대한 마감재 유무의 영향은 미비한 것으로 나타났다. 이에 마감재 종류를 더 선정하여 마감재 유무에 따른 초음파속도법 연구가 필요하며 신뢰도를 높일 수 있는 추정기법 연구가 필요하다.