• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.519-519
• /
• 2023

Estuarine dams are a recent and global phenomenon. While estuarine dams can provide the benefit of improved freshwater resources, they can also alter estuarine processes. Due to the wide range of estuarine types and estuarine dam configurations, the effect of estuarine dams on estuaries is not well understood in general. To develop a systematic understanding of the effect of estuarine dam location and freshwater discharge interval on a range of estuarine types (strongly stratified, partially mixed, periodically stratified, and well-mixed), this study used a coupled hydrodynamic-sediment dynamic numerical model (COAWST) and compared flow, sediment transport, and morphological conditions in the pre- and post-dam estuaries. For each estuarine type, scenarios with dam locations at 20, 55 and 90 km from the mouth and discharge intervals of a discharge every 0.5, 3, and 7 days were investigated. The results were analyzed in terms of change in tide, river discharge, estuarine classification, and sediment flux mechanism. The estuarine dam location primarily affected the tide-dominated estuaries, and the resonance length was an important length scale affecting the tidal currents and Stokes return flow. When the location was less than the resonance length, the tidal currents and Stokes return flow were most reduced due to the loss of tidal prism, the dead-end channel, and the shift from mixed to standing tides. The discharge interval primarily affected the river-dominated estuaries, and the tidal cycle period was an important time scale. When the interval was greater than the tidal cycle period, notable seaward discharge pulses and freshwater fronts occurred. Dams located near the mouth with large discharge interval differed the most from their pre-dam condition based on the estuarine classification. Greater discharge intervals, associated with large discharge magnitudes, resulted in scour and seaward sediment flux in the river-dominated estuaries, and the dam located near the resonance length resulted in the greatest landward tidal pumping sediment flux and deposition in the tide-dominated estuaries.

• 대한본초학회지
• /
• 제38권5호
• /
• pp.21-29
• /
• 2023

Objects : This study aimed to identify the origin species of Ulmi Cortex and Ulmi Semen Pasta. Methods : I searched for different types of 'Yu(楡)' from Zhong Xiu Zheng Huo Jing Shi Zheng Lei Bei Yong Ben Cao (重修政和經史證類備用本草) of the Song Dynasty, then compared the descriptions of Yu with real life species. Items that were inconsistent were sequentially deleted to finally find the original species that satisfies all conditions. Results : There were five types of Yu : Jiyu(地楡), Jayu(刺楡), Langyu(郞楡), Goyu(姑楡), and Baekyu(白楡). Jiyu was Sanguisorba officinalis or Sanguisorba officinalis var. longifolia which was a herb. Jayu was Hemiptelea davidii (Hance) Planch. which had thorns on its branches. Ulmus laciniata had leaves that split into three branches. Langyu was Ulmus parvifolia which beared fruit in the fall. For these reasons, the four items above were ruled out. The fruit of Goyu was Ulmi Semen Pasta, which was the largest among fruits and was therefore Ulmus macrocarpa. The fruit of Baekyu was Yuhyup(楡莢) and the ancient coin Yuhyupjeon(楡莢錢) was resembled Yuhyup. The normal pulse of the lung resembled the appearance of falling Yuhyup. The peel of Baekyu was Yubaekpi(楡白皮), and when it was removed from coarse bark, contained an abundance of white sap; the place where this sap overflowed on the stem bark was white, therefore Baekyu was identified as Ulmus pumila. Conclusions : From the results above, the origin species of Ulmi cortex was Ulmus pumila and the origin species of Ulmi Semen Pasta was Ulmus macrocarpa.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.55-61
• /
• 2023

With femtosecond (fs) laser pulse irradiation on metals, various types of nano- and micro-scale structures can be naturally induced at the surface through laser-matter interaction. Two notable structures are laser-induced periodic surface structures (LIPSSs) and cone/spike structures, which are known to significantly modify the optical and physical properties of metal surfaces. In this work, we irradiate fs laser pulses onto various types of metals, cold-rolled steel, pickled & oiled steel, Fe-18Cr-8Ni alloy, Zn-Mg-Al alloy coated steel, and pure Cu which can be useful for precise molding and imprinting processes, and adjust the morphological profiles of LIPSSs and cone/spike structures for clear structural coloration and a larger range of surface wettability control, respectively, by changing the fluence of laser and the speed of raster scan. The periods of LIPSSs on metals used in our experiments are nearly independent of laser fluence. Accordingly, the structural coloration of the surface with LIPSSs can be optimized with the morphological profile of LIPSSs, controlled only by the speed of the raster scan once the laser fluence is determined for each metal sample. However, different from LIPSSs, we demonstrate that the morphological profiles of the cone/spike structures, including their size, shape, and density, can be manipulated with both the laser fluence and the raster scan speed to increase a change in the contact angle. By injection molding and imprinting processes, it is expected that fs laser-induced surface structures on metals can be replicated to the plastic surfaces and potentially beneficial to control the optical and wetting properties of the surface of injection molded and imprinted products.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1351-1354
• /
• 2002

Wind farm which are composed with wind turbine generators can be a good alternatives to solve environmental problem and solutions to cope with energy crisis for using wind energy. Until now, these wind turbine generators have been being studied on the viewpoint of only active power control for reducing the burden of main grid. In this control scheme, we might demand a reactive power compensator in order to make reparation for the reactive power produced from wind turbine generator itself. Therefore, if the reactive power as well as active power of wind turbine generator were controlled according to the demand of reactive power, the installation of a additional reactive power compensator could be reduced. This paper presents the control method of a active and reactive power for wind turbine generators by means of SVPWM(Space Vector Pulse Width Modulation) inverting method and describes a operational coordination of wind turbine generators. The proposed power control algorithm can simply produce the output power of wind turbine generator needed in wind farm, which can reduce the power of main grid more and exclude a supplementary reactive power compensator. We assumed that wind farm are composed with two kinds of wind turbine generators, AC/DC/AC and induction generator types.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권4호
• /
• pp.217-226
• /
• 2005

본 연구는 비파괴 실험을 통해 공시체와 부재 시험체의 코어 공시체를 채취 후, 파괴실험과 비파괴 실험을 실시하여 압축강도의 추정식을 제안한 것으로, 그 결과는 다음과 같다. 혼화콘크리트에 대해 기존의 보통콘크리트 제안식을 적용하면 파괴압축강도와 추정강도간의 오차율이 발생하게 되므로, 본 연구에서는 혼화재 종류 및 시험방법에 따라 다음과 같은 추정식을 제안한다.

• Structural Engineering and Mechanics
• /
• 제50권3호
• /
• pp.275-286
• /
• 2014

This paper reports the influence of number of layers and length of GFRP sheets wrapped onto RCC beams for strengthening. Twelve beams of size $700mm{\times}150mm{\times}150mm$ were cast and tested. Two beams without GFRP and ten beams wrapped in different lay-up patterns with one and two layers of GFRP sheets was subjected to three point loading test and ultrasonic pulse velocity test. Initial crack load, ultimate failure load and types of failure have been observed and noted. Experimental results indicate a significant increase in initial and ultimate load carrying capacity of GFRP wrapped beams compared to unwrapped beams. The failed control specimen was retrofitted using U wrap scheme and tested under three point loading.

• Journal of Microbiology and Biotechnology
• /
• 제21권1호
• /
• pp.50-54
• /
• 2011

This study's objective was to determine the prevalence of Salmonella spp. in pigs and their farm environments in Korea, and to investigate the relationship between the strains based on their phenotypic and genotypic characteristics. A total of 36 Salmonella spp. were isolated in this study: 18 isolates from 492 pigs (3.7%) and 18 isolates from 418 (4.3%) farmhouse environmental samples from 16 different pig farms. Of the Salmonella strains isolated from the numerous environmental samples, the highest prevalence was observed in slurry or manure, followed by partitions, farmer's hands, floors, water/nipples, ventilation sources, and feed, respectively. All the Salmonella isolates originating from different farms were genetically distinct. In three farms, however, identical phage types and pulse-field gel electrophoresis patterns were observed among Salmonella isolates from pig feces and environmental samples. This study suggests that environments contaminated with Salmonella could pose an infection risk to pigs on pig farms.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.939-944
• /
• 2001

For the application of simultaneous $DeSO_{2}\;&\;DeNO_{x}$ equipment using non-thermal plasma process to the industrial and power plants, the many types of plasma device and process were studied. The e-beam and pulsed plasma corona discharge process are outstanding for the study to apply commercial large-scale plant from among these. In this paper, non-thermal plasma of technical trends and the characteristics of system developed by Doosan heavy industries & construction Co., Ltd. are explained. We have researched pulsed plasma corona discharge process since 1994. At the basis of reasonable results for the pilot plant, we constructed the demonstration plant at a domestic coal-fired power plant in 1999, as the previous step for commercial use. In near future, enough information about designs and costs of commercial-size system will be obtained.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.470-474
• /
• 2001

IGBT inverters have switching rise times of 0.2-2 $\mu$ sec, and have been believed to cause insulation stresses and premature motor failures. Inverter driven induction motors with high speed switching and advanced PWM techniques are widely used for variable speed applications. Recently, the insulation failures of stator winding have attracted many concerns due to high dv/dt of IGBT PWM inverter output. In this paper, the detailed insulation test results of 19 low-voltage induction motors are presented. Different types of insulation techniques are applied to 19 motors. The insulation characteristics are analyzed with partial discharge, discharge inception voltage, and dissipation factor tests. Also, breakdown tests by high voltage pulses are performed, and the corresponding breakdown voltages are obtained.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.153-161
• /
• 2002

This paper develops a finite element model for crashworthiness analysis ova small-sized bus. The full vehicle finite element model is composed of 31,982 shell elements,599 beam elements,42 bar elements, and 34,204 nodes. The model uses four material models (such as elastic, elastic-plastic(steel), rigid. and elastic-plastic (rubber) material model) of PAM-CRASH. The model uses four contact types to define sliding interfaces in ten areas. A frontal crash test using an actual vehicle with 30mph velocity to a rigid barrier is carried out. Vehicle pulses at lower part of left and right b-pillar are measured, and deformed shapes of frame and driver seat's lower left area are photographed. A frontal crash simulation using the developed full vehicle finite element model is performed with PAM-CRASH installed in super computer SP2. The simulation is performed with the same conditions as the test. The measured vehicle pulses and photographed deformed shapes from the test are compared to ones from the simulation to validate the reliability of the developed model.