• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.3
• /
• pp.249-256
• /
• 1997

A pulse-chase labeling of $^{15}N$ on winter rye (Scale cereale) and forage rape (Brassica napus) grown at $15^{\circ}C$ and $25^{\circ}C$ was carried out to determine the effects of low temperature on the uptake exogenous N and the remobilization of endogenous N. The growth rate of leaves and roots depressed at $5^{\circ}C$. AAer 9 days at $5^{\circ}C$, nitrogen content of leaves decreased to 20% on the average while that of roots increased to 12% compared with the plants grown at $25^{\circ}C$. Total content of $NO_3$- uptake 60m medium was 23.0 and 43.5 mg Nlplant, respectively, for winter rye and forage rape grown at $5^{\circ}C$ during 9 days. These values were corresponded to 59.3 and 26.1% lower uptake than those of $25^{\circ}C$. A large part of 1 5 ~ was distributed into leaves throughout time course in both of two species. The content of $^{15}N$ in leaves of winter rye at day 6 increased to 166 and 296 $\mu^{15}$N/plant compared with the initial value (day 0) in the plants grown at $5^{\circ}C$and $25^{\circ}C$ , corresponding to 90 and 163 $\mu$g N of remobilization h m roots into leaves during the fist 6 days. From 7 to 9 days, 75 and 52 $\mu$gN of outflow 6om leaves were occurred at $5^{\circ}C$ and $25^{\circ}C$. However, little remobilization of endogenous N was estimated in forage rape throughout the entire time course regardless of temperature treatment. Comparing two species studied, winter rye was much sensitively influenced by low temperature on the uptake of exogenous N and the remobilization of endogenous N.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1066-1071
• /
• 2017

Recently high voltage impulse (HVI) technique has been extensively studied for desalting processes to control the $CaCO_3$ scale formation in industrial water practices such as power plant, boiler, and heat exchange operations. Investigation of the operational parameters for the HVI is important, however, those had not been reported yet. In this study, the effect of initial feed volume and contact time on reduction of calcium ion concentration by the HVI technique was investigated. Initial feed volumes of artificial hard water which contained 100 mg/L of $Ca^{2+}$, were set to 1, 2, and 3 L respectively. After 24hr of HVI contact with 12kV, $Ca^{2+}$ ion was reduced to 50, 29 and 19 % of their initial concentration, indicating that calcium removal increased as initial feed volume decreased. This implies the applied HVI pulse energy per unit mass of calcium is important parameter determining overall desalting efficiency. A series of extended operations of HVI up to 30 days verified the long term stability of the HVI system. The calcium ion declined to 40 mg/L after 2~3 days, and further reduction of calcium was not achieved, indicating that optimum operation time could be 2~3 days under these experimental conditions. Consequently, it was confirmed that the important operational parameter of HVI technique is initial feed volume and contact time as well as the applied voltage that was already proven in the previous study.

• Korean Security Journal
• /
• no.41
• /
• pp.37-66
• /
• 2014

In recent years, with the development of computers and electronics, electronics and communication technology in a growing and each part is dependent on the cross-referencing makes all electronic equipment is obsolete due to direct or indirect damage EMP. Korea and the impending standoff North Korea has a considerable level of technologies related to the EMP, EMP weapons you already have or in a few years, the development of EMP weapons will complete. North Korea launched a long-range missile and conducted a nuclear test on several occasions immediately after, when I saw the high-altitude nuclear blackmail has been strengthening the outright offensive nuclear EMP attacks at any time and practical significance for the EMP will need offensive skills would improve. At this point you can predict the damage situation of Korea's security reality that satisfy the need, more than anything else to build a protective system of the EMP. The scale of the damage that unforeseen but significant military damage and socio-economic damage and fatalities when I looked into the situation which started out as a satellite communications systems and equipment to attack military and security systems and transportation, finance, national emergency system, such as the damage elsewhere. In General, there is no direct casualties reported, but EMP medical devices that rely on lethal damage to people who can show up. In addition, the State power system failure due to a power supply interruption would not have thought the damage would bring State highly dependent on domestic power generation of nuclear plants is a serious nuclear power plant accident in the event of a blackout phenomenon can lead to the plant's internal problems should see a forecast. First of all, a special expert Committee of the EMP, the demand for protective facilities and equipment and conduct an investigation, he takes fits into your budget is under strict criteria by configuring the contractors should be sifting through. He then created the Agency for verification of performance EMP protection after you have verified the performance of maintenance, maintenance, safety and security management, design and construction company organized and systematic process Guard facilities or secret communications equipment and perfect for the EMP, such as protective equipment maneuver system should take.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.93-100
• /
• 1990

The optimum conditions of electric stimulation for electrofusion of protoplasts of petunia, carrot and soybean, and the effects of calcium, magnesium, protease, trypsin, triton X-100, concanavalin A, dimethyl sulfoxide(DMSO), glycerol monooleate and spermine on fusion frequency and/or viability of petunia protoplast were investigated. The optimum frequencies(Hz)-amplitudes(V/cm) of AC Pulse for protoplast pearl-chain formation were 10 kHz-20 V/cm and 1 MHz-60 V/cm for petunia, 100 kHz-40 V/cm and $1\;MHz-40{\sim}60\;V/cm$ for carrot, and $1\;MHz-40{\sim}80\;V/cm$ for soybean, respectively. The optimum condition of DC pulse treatment at the 1 MHz-60 V/cm-15sec treatment of AC for electrofusion of petunia protoplasts was 2.5 kV/cm-40 sec, and under this condition the fusion frequency and viability of protoplasts were 45 % and 10 %, respectively, Both of the protoplasts of carrot and soybean were not fused under the AC and DC conditions tested in this experiment. The electrofusion of petunia protoplasts was stimulated by calcium, and the fusion frequency and the viability of the protoplasts were 43 % and 11 % , respectively at the calcium concentration of 140 mM. Although fusion frequency was not affected by magnesium only, magnesium stimulated fusion frequency in the presence of calcium, and the viability and fusion frequency of petunia protoplasts were 45 % and 13 %, respectively, at 140 mM of magnesium-140 mM of calcium. The relative fusion frequencies of petunia protoplasts to the controls were increased by 2.4, 2.1, 1.6, 1.4, 1.8, 1.5 and 2.2 folds, respectively, by the treatments of protease, trypsin, triton X-100, concanavalin A, DMSO, glycerol monooleate, and spermine. The viabilities of petunia protoplasts were decreased by these substances.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.399-407
• /
• 2009

Laser induced breakdown spectroscopy(LIBS) is an simple analysis method for directly quantifying many kinds of soil micro-elements on site using a small size of laser without pre-treatment at any property of materials(solid, liquid and gas). The purpose of this study were to find an optimum condition of the LIBS measurement including wavelengths for quantifying soil elements, to relate spectral properties to the concentration of soil elements using LIBS as a simultaneous un-breakdown quantitative analysis technology, which can be applied for the safety assessment of agricultural products and precision agriculture, and to compare the results with a standardized chemical analysis method. Soil samples classified as fine-silty, mixed, thermic Typic Hapludalf(Memphis series) from grassland and uplands in Tennessee, USA were collected, crushed, and prepared for further analysis or LIBS measurement. The samples were measured using LIBS ranged from 200 to 600 nm(0.03 nm interval) with a Nd:YAG laser at 532 nm, with a beam energy of 25 mJ per pulse, a pulse width of 5 ns, and a repetition rate of 10 Hz. The optimum wavelength(${\lambda}nm$) of LIBS for estimating soil and plant elements were 308.2 nm for Al, 428.3 nm for Ca, 247.8 nm for T-C, 438.3 nm for Fe, 766.5 nm for K, 85.2 nm for Mg, 330.2 nm for Na, 213.6 nm for P, 180.7 nm for S, 288.2 nm for Si, and 351.9 nm for Ti, respectively. Coefficients of determination($r^2$) of calibration curve using standard reference soil samples for each element from LIBS measurement were ranged from 0.863 to 0.977. In comparison with ICP-AES(Inductively coupled plasma atomic emission spectroscopy) measurement, measurement error in terms of relative standard error were calculated. Silicon dioxide(SiO2) concentration estimated from two methods showed good agreement with -3.5% of relative standard error. The relative standard errors for the other elements were high. It implies that the prediction accuracy is low which might be caused by matrix effect such as particle size and constituent of soils. It is necessary to enhance the measurement and prediction accuracy of LIBS by improving pretreatment process, standard reference soil samples, and measurement method for a reliable quantification method.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.16-23
• /
• 2016

This study was carried out to investigate the effects of artificial light sources on growth and yield of hydroponically grown Peucedanum japonicum in plant factory. Treatments were composed with; florescent lamp(FL) as control, and LED lights; R:B(2:1, RB), R:B:W(2:1:3, RBW), and R:B:G:W(2:1:0.5:3, RBGW). Plant height of RBGW and FL treatments were superior to RB and RBW. Leaf weight of RBW and RB were superior to FL and RBGW. There were no significant difference of leaf length and thickness among the treatments. Lightness of leaves was same tendency with plant height. Total phenolic compound content was the high in order of RB as $105.77mg{\cdot}100g^{-1}$ GE, RBW as $92.52mg{\cdot}100g^{-1}$ GE, FL as $89.08mg{\cdot}100g^{-1}$ GE, and RBGW $82.00mg{\cdot}100g^{-1}$ GE. Total flavonoids were not detected in all treatments. Vitamin C content was the highest in RB and the lowest in FL. Total dietary fiber were the highest in FL and the lowest in RBGW. There was no significant difference cystein and methionine contents among the treatments. Concludely, yield, total phenolic compounds, and vitamin C content was high in RBW and RB. We reached conclusion that RBW is best artificial light source considering yield, functionality and eye fatigability when work. We recommend to further study LED pulse and duty rates for increasing functionality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.3
• /
• pp.243-250
• /
• 1981

Soybean, azuki-bean and mungbean were cultivated at different growing conditions, May 10, June 9, July 9 seeding, and May 10 seeding-short day treatment, to investigate the distribution of flowering date and the variation of pod/flower ratio. The growth habit type of the soybean variety used was determinate, but the azuki-bean and mungbean varieties used showed indeterminate growth habit. The pod/flower ratio ranged 38 to 48% for soybean, 23 to 34% for azuki-bean and 46 to 60% for mungbean along with growing conditions. Flower abscission for soybean and mungbean, and pod abscission for azuki-bean affected more on the number of matured pods. Soybean showed once full blooming period, but azuki-bean and mungbean showed two or three times full blooming period except July 9 seeding plot through the whole growing period. Flowers bloomed just after every full blooming period showed lower value of pod/flower ratio and higher pod/flower ratio was obtained from flowers bloomed before or far after full blooming at plots seeded May 10 and June 9 in three pulse crops. Most full blooming period of soybean coincided within 5 days near the terminal leaf appearance date, and number of flowers bloomed before terminal leaf expansion and matured pods from these flowers were major in every soybean plant at all growing codition plots. No relations were found between terminal leaf appearance and flowering or pod setting patterns of azuki-bean and mungbean.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.4
• /
• pp.1-10
• /
• 2010

The scientific verification of the physiological and psychological effects that result from interaction with green plants would not only provide objective knowledge on the psychological effect of green but would also establish useful grounds for the creation of green spaces that consider human emotions. The present study measured the cerebral activity(cerebral blood flow) and the autonomic nervous system activity (blood pressure, pulse rate, amylase) of fifteen Korean male subjects as they inhaled the natural scent diffused by pine needles. Impression and mood state evaluations of the reactions to the pine scent were carried out using the SD method and POMS. Cerebral activity was observed to be significantly activated in the feeling, judgment, and motor areas of the frontal lobe, as well as the memory area in the temporal lobe. Verbal evaluations by the SD method and POMS indicated a pine scent left natural but stimulated and active impressions, provided vigor, and also reduced confusion. The autonomic nervous system activities, however, showed no significant differences. These findings verified scientifically that a pine scent vitalizes humans both physiologically and psychologically. These results could be useful as fundamental data for the design of green spaces that consider human emotional aspects.

• Nuclear Engineering and Technology
• /
• v.40 no.6
• /
• pp.451-458
• /
• 2008

After more than 10 years construction, KSTAR (Korea Superconducting Tokamak Advanced Research) had finally completed its assembly in June 2007, and then achieved the goal of first-plasma in July 2008 through the four month's commissioning. KSTAR was constructed with fully superconducting magnets with material of $Nb_3Sn$ and NbTi, and their operation temperatures are maintained below 4.5K by the help of Helium Refrigerator System. During the first-plasma operation, plasmas of maximum current of 133kA and maximum pulse width of 865ms were obtained. The KSTAR Integrated Control System (KICS) has successfully fulfilled its missions of surveillance, device operation, machine protection interlock, and data acquisition and management. These and more were all KSTAR commissioning requirements. For reliable and safe operation of KSTAR, 17 local control systems were developed. Those systems must be integrated into the logically single control system, and operate regardless of their platforms and location installed. In order to meet these requirements, KICS was developed as a network-based distributed system and adopted a new framework, named as EPICS (Experimental Physics and Industrial Control System). Also, KICS has some features in KSTAR operation. It performs not only 24 hour continuous plant operation, but the shot-based real-time feedback control by exchanging the initiatives of operation between a central controller and a plasma control system in accordance with the operation sequence. For the diagnosis and analysis of plasma, 11 types of diagnostic system were implemented in KSTAR, and the acquired data from them were archived using MDSpius (Model Driven System), which is widely used in data management of fusion control systems. This paper will cover the design and implementation of the KSTAR integrated control system and the data management and visualization systems. Commissioning results will be introduced in brief.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.57-62
• /
• 2011

Sometimes inhabitants in remote areas have inadequate or no access to modern medicines or medical services. They can get benefit in term of the treatment against malaria by cultivating selected breeding of A. annua and making teas or decoctions from the plant materials following the proper way of tea preparation. In order to have the maximum extraction efficiency for artemisinin, different ways of tea preparations of A. annua were investigated by applying the developed DPP method and described in this article. Tea was prepared by three different ways (cooking, without cooking with/without shaking and microwave oven) with different times. From the results, it has been found that higher concentration of artemisinin (84.7%) can be attained by following the approach for tea preparation without cooking with shaking for 15 minutes (R.S.D. 2.34%). The concentration of artemisinin decreases with cooking more than 1.5 min in microwave oven. The utmost extraction (88.9% of artemisinin) is possible to extract by shaking with boiled 5% ethanol in distilled water (R.S.D. 2.28%).