• 대한예방한의학회지
• /
• 제23권3호
• /
• pp.21-30
• /
• 2019

Objective : The study aimed to report the results of workplace-based Korean Medicine cohort, The cohort collected the health information including physical measurements, questionnaires, and biomarkers. Method : This study was conducted on 200 faculty members of two hospitals and two universities in 2017 through 2018. The study analyzed physical measurement, cold-heat questionnaire, body compositions and pulse characteristics. Result : The heat-cold score, waist circumference, visceral fat area, and body water were different according to the Sasang constitution, in order of Taeum > Soyang > Soeum. The pulse energy difference was shown only in women. Conclusion : There were differences in body composition such as heat point, waist circumference, internal fat area and body water content by constitution, and also difference by body mass in total energy in pulse examination. It is believed that there were significant relation between physical, physical and energy metabolic aspects through Sasang constitution.

• Journal of Ginseng Research
• /
• 제32권4호
• /
• pp.332-336
• /
• 2008

홍삼은 외부형태 및 내부조직품질에 의하여 등급이 분류되고, 3등급이하의 홍삼은 본삼으로 판매하지 않는다. 또한 등급에 따라 가격차이가 매우 큼으로 저급홍삼에 고급홍삼이 혼입되면 경제적 손실이 발생하고, 고급 등급의 홍삼에 하위등급의 홍삼이 혼입되면 클레임이 발생된다. 현재 슬${\hat{e}}{\ddot{u}}$을 이용한 육안검사는 검사자에 따라 기준이 통일되기 어렵고, 오차를 일으킬 가능성이 있어 홍삼의 비 파괴내부조직검사의 가능성을 조사하기 위하여 본 연구를 수행하였다. 홍삼시료의 수분함량은 $10{\sim}13%$에서 MR image를 획득 후 절단하여 MR image가 실제 절단면과 일치하는지 비교 관찰하였다. 홍삼 내부조직의 단면을 보기 위하여 동일한 조건의 Spin echo pulse sequence에서 시간, slice thickness, 온도별로 MR image를 얻었다. 홍삼은 수분함량이 낮기 때문에 MR 신호가 매우 미약하여 single point image(SPI) 측정방법으로는 약 30분 이상 시간이 소요되었다. 그러나 spin echo pulse sequence에서 내부조직을 구분할 수 있는 적당한 시간은 TE(Echo Time) 2.23 ms, TR(Repetition Time) 150 ms에서 약 9초 동안 측정으로 내부조직판별이 가능하였다. Slice thickness를 3, 5, 10 mm로 변화를 주어 측정한 결과 10 mm로 하였을 때 9초 이내에 내부조직 판별이 충분히 가능한 image를 얻을 수 있었다. 55로 약 30분간 시료를 가온 후 얻은 image가 상온에서 얻은 것보다 더 선명하였다. 이러한 원인은 온도를 가함으로서 수분의 활성이 높아져 MR 신호가 더 강해지는 것으로 생각된다. 이로서 짧은 시간에 홍삼의 MR Image를 획득하여 내부조직 특성을 비교 관찰할 수 있었다. 이러한 방법은 홍삼의 내부조직 평가에 활용가능성이 있을 것으로 판단된다.

• Journal of Power Electronics
• /
• 제5권3호
• /
• pp.224-232
• /
• 2005

A new three phase three-level Pulse Width Modulation (PWM) Switched Voltage Source (SVS) inverter with zero neutral point potential is proposed. It consists of three single-phase inverter modules. Each module is composed of a switched voltage source and inverter switches. The major advantage is that the peak value of the phase output voltage is twice as high as that of a conventional neutral-point-clamped (NPC) PWM inverter. Thus, the proposed inverter is suitable for applications with low voltage sources such as batteries, fuel cells, or solar cells. Furthermore, three-level waveforms of the proposed inverter can be achieved without the switch voltage imbalance problem. Since the average neutral point potential of the proposed inverter is zero, a common ground between the input stage and the output stage is possible. Therefore, it can be applied to a transformer-less Power Conditioning System (PCS). The proposed inverter is verified by a PSpice simulation and experimental results based on a laboratory prototype.

• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.73-76
• /
• 2010

A two-facet approach was used to investigate the parametric performance of functional high-speed DDR3 (Double Data Rate) DRAM (Dynamic Random Access Memory) die placed in different types of BGA (Ball Grid Array) packages: wire-bonded BGA (FBGA, Fine Ball Grid Array), flip-chip (FCBGA) and lead-bonded $microBGA^{(R)}$. In the first section, packaged live DDR3 die were tested using automatic test equipment using high-resolution shmoo plots. It was found that the best timing and voltage margin was obtained using the lead-bonded microBGA, followed by the wire-bonded FBGA with the FCBGA exhibiting the worst performance of the three types tested. In particular the flip-chip packaged devices exhibited reduced operating voltage margin. In the second part of this work a test system was designed and constructed to mimic the electrical environment of the data bus in a PC's CPU-Memory subsystem that used a single DIMM (Dual In Line Memory Module) socket in point-to-point and point-to-two-point configurations. The emulation system was used to examine signal integrity for system-level operation at speeds in excess of 6 Gb/pin/sec in order to assess the frequency extensibility of the signal-carrying path of the microBGA considered for future high-speed DRAM packaging. The analyzed signal path was driven from either end of the data bus by a GaAs laser driver capable of operation beyond 10 GHz. Eye diagrams were measured using a high speed sampling oscilloscope with a pulse generator providing a pseudo-random bit sequence stimulus for the laser drivers. The memory controller was emulated using a circuit implemented on a BGA interposer employing the laser driver while the active DRAM was modeled using the same type of laser driver mounted to the DIMM module. A custom silicon loading die was designed and fabricated and placed into the microBGA packages that were attached to an instrumented DIMM module. It was found that 6.6 Gb/sec/pin operation appears feasible in both point to point and point to two point configurations when the input capacitance is limited to 2pF.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.370-373
• /
• 1997

In this paper, we compose of the stepdown chopper and the current source inverter. Because dc side current of the current source inverter pulse with twice frequency of utility, we control that modulation factor of chopper is pulsed twice frequency. Therefore if voltage across the dc reactor equal to zero, it tis decreased. And we control modulation factor of the chopper to operate at maximum power point around of solar cell.

• Journal of information and communication convergence engineering
• /
• 제1권4호
• /
• pp.228-232
• /
• 2003

The previous design work for very large final amplifier pumped by electron beam module was described from the point of view of energy characteristics. In this work, the design problems for phase front distortion, ASE, and gain control in large aperture amplifier are presented in detail.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1097-1100
• /
• 2001

In this paper, the electro-chemical-machining characteristics of Ni-Ti Shape Memory Alloy(SMA) was investigated. From the experimental results, the optimal electro chemical machining conditions for satisfying the machining quality(fine surface & high recovery stress) might be confirmed. And it was concluded that optical electro chemical condition for Ni-Ti SMA could be obtained at approximately 100% current efficiency and high frequency pulse current.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.955-958
• /
• 2000

In this paper, the electro-chemical-machining characteristics of Ni-Ti Shape Memory Alloy(SMA) was investigated. From the experimental results, the optimal electro chemical machining conditions for satisfying the machining quality(fine surface & high recovery stress)might be confirmed. And it was concluded that optical electro chemical condition for Ni-Ti SMA could be obtained at approximately 100% current efficiency and high frequency pulse current.

• 한국전산구조공학회논문집
• /
• 제37권2호
• /
• pp.119-131
• /
• 2024

일반적으로 속도 펄스를 가진 지반운동이 속도 펄스가 없는 지반운동에 비하여 구조물에 보다 큰 손상을 줄 수 있다고 알려져 있다. 지진가속도기록으로부터 속도 펄스의 유무의 판정과 이를 정량화하는 연구가 현재 많이 진행되어 오고 있다. 기존 지진기록들을 단층으로 떨어진 거리를 기준으로 원거리 지진과 근거리 지진으로 구분하였다. 또한, 근거리 지진은 속도 펄스의 유무를 정량화하여 펄스를 가진 지진과 펄스를 가지지 않은 지진으로 구분하였다. 최종적으로 각 지진그룹별로 40개의 원거리지진, 40개의 속도 펄스를 가진 근거리 지진과 40개의 속도 펄스를 가지지 않은 근거리 지진을 선정하였으며, 총 120개 지진가속도 기록을 지진취약도 평가를 위한 지진해석에 사용하였다. 세 그룹의 지진을 이용하여 납-고무받침과 탄성받침을 가진 두 종류의 예제교량에 대한 지진응답을 평가하여 확률론적 지진요구도 모델을 작성하였다. 확률론적 지진요구도 모델을 이용하여 지진취약도 해석을 수행하여 속도 펄스의 유무에 따른 지진취약도 영향을 분석하였다. 지진파의 속도 펄스 유무에 따른 지진취약도 곡선의 비교 결과로부터, 속도 펄스를 가진 지진의 지진취약도가 속도 펄스가 없는 지진의 지진취약도가 약 3배~5배 정도 정도 크게 나타난다. 이는 속도 펄스를 가진 지진의 경우가 그렇지 않은 지진의 경우에 비하여 교량의 손상 피해가 크다는 것을 의미한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1317-1319
• /
• 1995

In this paper, we studied reduction characteristics of NOx gas produced from diesel engine combustion using by point-plane electrode. Here, input voltage forms were types of three [DC, AC, DC Positive pulse] and NOx gas of 1700ppm was composed of NO 1665ppm, $NO_2$ 35ppm on balance of $N_2$. We investigated NOx reduction characteristics as various of parameters, are gas flow rate, input voltage form and, humidity. From the results of study, reduction characteristics of NOx exhibited good when gas flow rate was small, input voltage was DC and much humidity were contained to NOx gas.