• 제목/요약/키워드: Pulse Mode

검색결과 753건 처리시간 0.028초

S대역 군사 레이더용 2kW급 GaN HEMT 증폭기 개발 (Development of 2-kW Class C Amplifier Using GaN High Electron Mobility Transistors for S-band Military Radars)

  • 김시옥;최길웅;유영근;임병옥;김동길;김흥근
    • 한국전자통신학회논문지
    • /
    • 제15권3호
    • /
    • pp.421-432
    • /
    • 2020
  • 본 논문에서는 S-밴드 군용 레이더에 사용되고 기존의 TWTA를 대체하기 위해 GaN HEMT 기반 증폭모듈을 이용하여 개발한 2kW급 반도체증폭기(SSPA)를 제안하였다. 제안한 SSPA는 8개의 증폭모듈로 이루어진 고출력증폭모듈, 구동증폭모듈, 제어모듈 및 전원공급 장치로 이루어져 있다. 제안한 SSPA는 1) 증폭모듈과 구성부품은 공간적 제약으로 작은 패키지에 통합설계 되었으며, 2) PCB 내장형 하모닉필터를 이용하여 고주파를 제거하였으며, 그리고 3) 입력신호의 듀티 변화에 대응하여 일정한 출력이 유지되도록 하는 자동이득조절기를 설계하였다. 제안된 SSPA는 최대 48 dB의 이득과 3.1~3.5 GHz의 주파수 대역에서 63-63.6 dBm의 출력 전력을 보였다. 자동이득조절 기능은 15-20 dBm의 입력전력 변동에도 대해서, 출력전력이 63dBm 전후로 일정하게 유지하는 것을 확인하였다. 마지막으로 MIL-STD-810의 시험기준을 만족하는 높은 (55 ℃) / 낮은 (-40 ℃) 온도시험 프로파일을 이용한 온도시험을 통해 개발된 시스템의 신뢰성을 검증하였다. 개발된 SSPA는 경량, 고출력, 고이득, 안전기능, 낮은 수리비, 짧은 수리시간 등 측면에서 기존의 TWTA 증폭기보다 우수한 것을 확인하였다.

n-Si(111) 기판 위에 전기증착에 의한 Fe 박막의 성장과 구조적 특성 (Growth and Structural Properties of Fe Thin Films Electrodeposited on n-Si(111))

  • 김현덕;박경원;이종덕
    • 한국정보통신학회논문지
    • /
    • 제10권9호
    • /
    • pp.1663-1670
    • /
    • 2006
  • 펄스 전기증착법에 의해 단결정 Fe 박막을 n-Si(111) 기판위에 직접 성장시켰다. CV 분석 을 통해 $Fe^{2+}n-Si(111)$ 계면은 쇼트키 장벽 형성에 따른 다이오드 특성을 가진다는 사실을 알 수 있었다. 또한 인가 전압에 따른 전기용량의 변화를 보여주는 Mott-Schottky chottky(MS) 관계식을 이용하여 전해질 내에서 n-Si(111) 기판의 flat-band potential(EFB)을 조사하였으며, 0.1M $FeCl_2$ 전해질 내에서 EFB와 산화-환원 전위는 각각 -0.526V 과 -0.316V 임을 알 수 있었다. Fe/n-Si(111) 계면반응 시, Fe 증착 초기 단계에서의 핵 형성과 성장 운동학은 과도전류 특성을 이용하여 조사하였으며, 과도전류 특성을 통해 Fe 박막의 성장모드는 "instantaneous nucleation and 3-dimensional diffusion limited growth"임을 알 수 있었다. 주파수가 300Hz, 최대 전압이 1.4V인 펄스 전압을 이용하여 n-Si(111) 기판위에 Fe를 직접 전기 증착 시켰으며, 형 성 된 Fe 박막은 단결정 ${\alpha}-Fe$로 Si 기판위에 ${\alpha}-Fe(110)/Si(111)$의 격자 정합성을 가지고 성장하였음을 XRD 분석을 통해 확인하였다.

헬기 탑재 X-밴드 펄스 도플러 레이다 시험 개발 (X-band Pulsed Doppler Radar Development for Helicopter)

  • 곽영길;최민수;배재훈;전인평;황광연;양주열;김도헌;강정완
    • 한국전자파학회논문지
    • /
    • 제17권8호
    • /
    • pp.773-787
    • /
    • 2006
  • 비행체 탑재 레이다는 민군 겸용으로 기상에 관계없이 전천후로 비행체의 안전 항행, 임무 감시, 사격 통제, 충돌 회피, 이착륙 등 비행에 필수적인 항공 전자 장치이다. 본 논문에서는 헬기 탑재 다중 모드 X-밴드 펄스 도플러 레이다 시험 모델의 설계, 제작 및 비행 시험 결과를 제시한다. 레이다 시스템은 안테나부, 송수신부, 신호처리부와 전시부의 4개의 LRU로 구성되며, 개발 기술은 평판 슬롯 배열 안테나, TWTA 송신기, coherent I/Q detector, 디지털 펄스 압축, MTI, DSP 기반 도플러 FFT 필터, 적응 CFAR, 도플러 추정보상 기법, 비행 안정화 및 TWS 추적 처리기를 포함한다. 개발된 레이다 시스템의 설계 성능은 다양한 지상 고정 및 이동 시험과 헬기 탑재 비행 시험을 통하여 이동 비행체 이동 클러터 보상과 MTD 성능을 확인하였다.

광음향 현미경을 위한 PVDF 기반 고주파수 초음파 변환기의 흡음층 소재에 따른 신호 특성 분석 (Signal-Characteristic Analysis with Respect to Backing Material of PVDF-Based High-Frequency Ultrasound for Photoacoustic Microscopy)

  • 이준수;장진호
    • 비파괴검사학회지
    • /
    • 제35권2호
    • /
    • pp.112-119
    • /
    • 2015
  • 고해상도 분자 영상이 가능한 광음향 현미경의 공간해상도는 초음파 변환기에 의해 결정되기 때문에 높은 동작 주파수, 광대역, 높은 신호 수신 효율을 갖는 광음향 수신 변환기는 고성능 광음향 현미경에 필수적이다. Polyvinylidene fluoride (PVDF)는 이러한 광음향 수신 변환기 성능 확보가 가능한 압전소재이다. 그러나 PVDF는 낮은 음향 임피던스로 인해 사용되는 흡음층에 의해서 중심주파수 및 대역폭이 영향을 받게된다. 본 논문에서는 광음향 현미경에 적합한 PVDF 기반 고주파수 초음파 수신 변환기의 최적 흡음층 소재의 음향 임피던스가 최종 변환기 성능에 어떠한 영향을 주는지에 관한 연구를 수행하였다. 이를 위해 EPO-TEK 301, E-Solder 3022, RTV를 각각 흡음층 물질로 사용하여 고주파수 초음파 수신 변환기를 제작하고 그 음향 특성을 평가하였다. 제작된 변환기의 공간해상도를 평가하기 위해 $25{\mu}m$ 직경을 갖는 철심을 표적으로 사용하여 영상을 획득하였으며, 실험을 통해 얻은 펄스-에코 신호 크기 및 중심주파수, -6 dB 대역폭, 공간해상도 평가를 통해 PVDF의 음향 임피던스보다 약간 높은 음향 임피던스를 갖는 EPO-TEK 301이 가장 적합한 흡음층 물질임을 알 수 있었다.

Metabolic Changes in Patients with Parkinson's Disease after Stereotactic Neurosurgery by Follow-up 1H MR Spectroscopy

  • Choe, Bo-Young;Baik, Hyun-Man;Chun, Shin-Soo;Son, Byung-Chul;Kim, Moon-Chan;Kim, Bum-Soo;Lee, Hyoung-Koo;Suh, Tae-Suk
    • 한국자기공명학회논문지
    • /
    • 제5권2호
    • /
    • pp.99-109
    • /
    • 2001
  • Authors investigated neuronal changes of local cellular metabolism in the cerebral lesions of Parkinsonian symptomatic side between before and after stereotactic neurosurgery by follow-up 1H magnetic resonance spectroscopy (MRS). Patients with Parkinson's disease (PD) (n = 15) and age-matched normal controls (n = 15) underwen MRS examinations using a stimulated echo acquisition mode (STEAM) pulse sequence that provided 2${\times}$2${\times}$2 ㎤ (8ml) volume of interest in the regions of substantia nigra, thalamus, and lentiform nucleus. Spectral parameters were 20 ms TE, 2000 ms TR, 128 averages,2500 Hz spectral width, and 2048 data points. Raw data were processed by the SAGE data analysis package (GE Medical Systems). Peak areas of N-acetylaspartate (NAA), creatine (Cr), choline-containing compounds (Cho), inositols (Ins), and the sum (Glx) of glutamate and GABA were calculated by means of fitting the spectrum to a summation of Lorentzian curves using Marquardt algorithm. After blindly processed, we evaluated neuronal alterations of observable metabolite ratios between before and after stereotactic neurosurgery using Pearson product-moment analysis (SPSS, Ver. 6.0). A significant reduction of NAA/Cho ratio was observed in the cerebral lesion in substantia nigra of PD patient related to the symptomatic side after neurosurgery (P : 0.03). In thalamus, NAA/Cho ratio was also significantly decreased in the cerebral lesion including the electrode-surgical region (P : 0.03). A significant reduction of NAA/Cho ratio in lentiform nucleus was not oberved, but tended toward significant reduction after neurosurgery (P = 0.08). In particular, remarkable lactate signal was noted from the surgical thalamic lesions of 6 among 8 patients and internal segments of globus pallidus of 6 among 7 patients, respectively. Significant metabolic alterations of NAA/Cho ratio might reflect functional changes of neuropathological processes in the lesion of substantia nigra, thalamus, and lentiform nucleus, and could be a valuable finding fur evaluation of Parkinson's disease after neurosurgery. Increase of lactate signals, being remarkable in surgical lesions, could be consistent with a common consequence of neurosurgical necrosis. Thus, IH MRS could be a useful modality to evaluate the diagnostic and prognostic implications fur Parkinsons disease after functional neurosurgery.

  • PDF

일회 영상으로 확산텐서 자기공명영상을 얻을 수 있는 다편-다에코 펄스 경사자장 스핀에코(MePGSE) 시퀀스의 초기 결과 (Multi-slice Multi-echo Pulsed-gradient Spin-echo (MePGSE) Sequence for Diffusion Tensor Imaging MRI: A Preliminary Result)

  • 장건호
    • 한국의학물리학회지:의학물리
    • /
    • 제18권2호
    • /
    • pp.65-72
    • /
    • 2007
  • 대부분의 임상용 자기공명영상 장치에서 확산텐서(difiusion tensor) 영상을 얻기 위하여 에코플렌(EPI) 스핀에코(spin-echo) 시퀀스를 사용한다. 하지만 이 영상법은 자화감수성에 매우 예민한 단점이 있다. 따라서 본 연구의 목적은 자화감수성에 의해 발생하는 영상의 변질을 최소화하면서 확산텐서를 한번에 얻을 수 있는 시퀀스를 개발하는데 있다. 모든 확산 텐서 성분을 한번에 얻기 위하여 다편(multi-slice) 8에코 스핀에코 시퀀스(MePGSE)가 개발되었다. 모든 180도 펄스는 기존에 사용된 방법과는 달리 선택된(slice selective) 경사자장을 이용하였다. 처음 7개의 에코 영상은 확산텐서 영상을 위하여 사용하였고, 마지막 에코 영상에서는 영상을 얻는 경사자장은 사용하지 않고 남아있는 자화를(residual magnetization) 최소화하기 위하여 삼차원 경사자장(crusher gradients)만을 사용하였다. 따라서 6개의 텐서 성분을 단 한번의 실험에 의하여 얻을 수 있었다. 이 시퀀스를 사용하여 물과 수박을 이용하여 실험을 하였으며 물에서의 확산 값이 기존에 출판된 값과 유사하게 나타나 본 연구에서 MePGSE 시퀀스의 신뢰를 가질 수 있었다.

  • PDF

알콜중독환자의 신경기능 장애: 생체 양성자 자기공명분광 연구 (Neuronal Dysfunction in Patients with Chronic Alcoholism Evaluated by In Vivo $^1H$ Magnetic Resonance Spectroscopy)

  • Bo-Young Choe;Euy-Neyng Kim;Chang-Wook Lee;In-Ho Baik;Kwang-Soo Lee;Byung-Chul Son;Heung-Jae Chun;Hyoung-Koo Lee;Tae-Suk Suh
    • Investigative Magnetic Resonance Imaging
    • /
    • 제4권2호
    • /
    • pp.94-99
    • /
    • 2000
  • 목적 : 국한적 수분억제 생체내 양성자 자기공명분광학을 사용하여 만성 알코을 중독자와 정상 건강인의 뇌대사물질의 비율을 비교평가하였다. 대상 및 방법 : 만성 알코을 중독자 10명,정상 건강인 10명의 좌측 소뇌와 basal ganglia의 관심부위 $2{\times}2{\times}2{\;}\textrm{cm}^3$를 각각 선택하여 STEAM펄스시퀀스를 이용하였다 Creatine (Cr)을 기준으로 Marquart알고리즘을 이용하여 각 대사물질의 비율을 산출하였다. 결과 만성 알코을 중독자의 특징적인 소견은 정상인과 비교하여 볼 때 N-acetyl aspartate (NAA)/Cr비율이 감소하였다. 그러나 Choline (Cho)/Cr등 다른 대사비율은 정상인과 유이한 차이를 발견할수 없었다. NAA/Cr비율은 임상평가와 상당한 상호관계가 있는 것으로 나타났다. 결론 : 본 예비실험 결과는 만성 알코을 중독자의 NAA/Cr의 비율 감소를 토대로 환자 소뇌의 신경세포 소실을 추정할 수 있었다. NAA/Cr비율은 향후 만성 알코을 중독자의 임상평가를 추정할수 있는 대사표준으로 사용될 수 있음을 시사해주고 있다. 따라서 생체내 양성자 자기공명분광법은 양성자 비율을 토대로 만성 알코을 중독자의 임상평가에 유용한 방법으로 사용될 수 있으리라 사료된다.

  • PDF

지상관측장비를 이용하여 관측한 봄철 황사의 연직분포와 광학적 특성 분석 (Analysis of Vertical Profiles and Optical Characteristics of the Asian Dust Using Ground-based Measurements)

  • 이병일;윤순창;김윤재
    • 대기
    • /
    • 제18권4호
    • /
    • pp.287-297
    • /
    • 2008
  • The vertical profiles and optical properties of Asian dust are investigated using ground-based measurements from 1998 to 2002. Vertical profiles of aerosol extinction coefficient are evaluated using MPL (Micro Pulse Lidar) data. Optical parameters such as aerosol optical thickness ($\tau$), ${\AA}ngstr\ddot{o}m$ exponent ($\alpha$), single scattering albedo ($\omega$), refractive index, and volume size distribution are analyzed with sun/sky radiometer data for the same period. We can separate aerosol vertical profiles into three categories. First category named as 'Asian dust case', which aerosol extinction coefficient is larger than $0.15km^{-1}$ and dust layer exists from surface up to 3-4km. Second category named as 'Elevated aerosol case', which aerosol layer exists between 2 and 6km with 1-2.5km thickness, and extinction coefficient is smaller than $0.15km^{-1}$. Third category named as 'Clear sky case', which aerosol extinction coefficient appears smaller than $0.15km^{-1}$. and shows that diurnal variation of background aerosol in urban area. While optical parameters for first category indicate that $\tau$ and $\alpha$ are $0.63{\pm}0.14$, $0.48{\pm}0.19$, respectively. Also, aerosol volume concentration is increased for range of 1 and $4{\mu}m$, in coarse mode. Optical parameters for second category can be separated into two different types. Optical properties of first type are very close to Asian dust cases. Also, dust reports of source region and backward trajectory analyses assure that these type is much related with Asian dust event. However, optical properties of the other type are similar to those of urban aerosol. For clear sky case, $\tau$ is relatively smaller and $\alpha$ is larger compare with other cases. Each case shows distinct characteristics in aerosol optical parameters.

레이저 처리후 임프란트 표면 변화에 관한 연구 (The Evaluation of the atomic composition and the surface roughness of Titanium Implants following Various Laser treatment with air-powder abrasive)

  • 김태정;임성빈;정진형
    • Journal of Periodontal and Implant Science
    • /
    • 제32권3호
    • /
    • pp.615-630
    • /
    • 2002
  • Various long-term studies have shown that titanium implants as abutments for different types of prostheses have become a predictable adjunct in the treatment of partially or fully edentulous patients. The continuous exposure of dental implants to the oral cavity with all its possible contaminants creates a problem. A lack of attachment, together with or caused by bacterial insult, may lead to peri-implantitis and eventual implant failure. Removal of plaque and calculus deposits from dental titanium implants with procedures and instruments originally made for cleaning natural teeth or roots may cause major alterations of the delicate titanium oxide layer. Therefore, the ultimate goal of a cleaning procedure should be to remove the contaminants and restore the elemental composition of the surface oxide without changing the surface topography and harming the surrounding tissues. Among many chemical and mechanical procedure, air-powder abrasive have been known to be most effective for cleaning and detoxification of implant surface. Most of published studies show that the dental laser may be useful in the treatment of pen-implantitis. $CO_2$ laser and Soft Diode laser were reported to kill bacteria of implant surface. The purpose of this study was to obtain clinical guide by application these laser to implant surface by means of Non-contact Surface profilometer and X-ray photoelectron spectroscopy(XPS) with respect to surface roughness and atomic composition. Experimental rough pure titanium cylinder models were fabricated. All of them was air-powder abraded for 1 minute and they were named control group. And then, the $CO_2$ laser treatment under dry, hydrogen peroxide and wet condition or the Soft Diode laser treatment under Toluidine blue O solution condition was performed on the each of the control models. The results were as follows: 1. Mean Surface roughness(Ra) of all experimental group was decreased than that of control group. But it wasn't statistically significant. 2. XPS analysis showed that in the all experimental group, titanium level were decreased, when compared with control group. 3. XPS analysis showed that the level of oxygen in the experimental group 1, 3($CO_2$ laser treatment under dry and wet condition) and 4(Soft Diode laser was used under toluidine blue O solution) were decreased, when compared with control group. 4. XPS analysis showed that the atomic composition of experimental group 2($CO_2$ laser treatment under hydrogen peroxide) was to be closest to that of control group than the other experimental group. From the result of this study, this may be concluded. Following air-powder abrasive treatment, the $CO_2$ laser in safe d-pulse mode and the Soft Diode laser used with photosensitizer would not change rough titanium surface roughness. Especially, $CO_2$ laser treatment under hydrogen peroxide gave the best results from elemental points of view, and can be used safely to treat peri-implantitis.

KSTAR 토카막 플라즈마 가열을 위한 중성 입자빔 입사장치용 이온원 개발 현황

  • 김태성;정승호;장두희;이광원;인상열;오병훈;장대식;진정태;송우섭
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.559-559
    • /
    • 2013
  • KSTAR (Korea Superconducting Tokamak Advanced Research) 장치는 차세대 에너지원 중의 하나인 핵융합로를 위한 과학기술 기반을 마련하기 위해 개발된 중형급 토카막 실험장치로서 토카막 운전 영역의 확장과 안정성 확보, 정상상태 운전 도달을 위한 방법 연구, 최적화된 플라즈마 상태와 연속 운전 실현 등을 주요 목표로 하고 있다. 이를 위해 핵융합 반응에 의한 점화조건과 가까운 상태로 플라즈마를 가열해주어야 하며, 토카막 장치의 저항가열 이외에도 외부에서 추가 가열이 반드시 필요하다. 중성 입자빔 입사 장치는 현재 토카막에서 사용되고 있는 가열장치 중 가장 신뢰성있는 추가 가열 장치라 할 수 있으며 한국 원자력연구원에서는 1997년부터 KSTAR 토카막 실험 장치에 사용될 중성 입자빔 입사 장치를 개발해왔었다. 중성빔 입사 장치는 크게 이온원, 진공함, 열량계, 진공 펌프, 중성화 장치, 이온덤프와 전자석으로 이루어져 있으며, 이중 이온원은 중성빔의 성능을 좌우하는 핵심적인 장치라 할 수 있다. 최근 한국원자력연구원에서는 2 MW 중성 입자빔 입사장치용 이온원 개발을 완료하여 KSTAR 토카막 장치에 설치하였으며, 2013년 현재 KSTAR에는 총 두 개의 이온원이 장착되어 최대 약 3 MW 이상의 중수소 중성 입자빔을 입사하여 KSTAR 토카막 실험의 H-mode 달성과 운전 시나리오 연구에 많은 기여를 하고 있다. 한국원자력연구원에서 최초로 개발된 이온원은 미국 TFTR 장치에서 사용되었던 US LPIS (Long Pulse Ion Source)를 기본으로 하여 국내 개발을 수행하였다. 이 온원은 크게 플라즈마를 발생시키는 플라즈마 발생부와 발생된 이온을 인출 및 가속시키는 가속부로 구성되는데, 개발과정에서 가장 먼저 KSTAR의 장주기 운전에 적합하도록 플라즈마 방전부와 가속부의 냉각회로를 요구되는 열부하에 맞게 설계 수정하였다. 그 후 플라즈마 방전부는 방전 시간과 안정성, 플라즈마 밀도의 균일도, 정격 운전, 방전 효율 등을 고려하여 수정 보완하며 개발을 진행하여왔다. 가속부의 경우 국내 제작기술의 한계를 극복하기 위해 빔 인출그리드를 TFTR의 US LPIS 모델의 슬릿형 그리드 타입에서 원형 인출구 타입으로 변경하였으며, 이후 가속 전극의 고전압 내전력 문제, 빔 인출 전류와 전력, 인출 빔의 광학적 질(quality), 빔 인출 시간 동안의 안정성 등을 위해 그리드의 크기와 간격, 모양 등을 변경하여 개발을 수 행하여 왔다. 이 논문은 한국원자력연구원에서 개발이 진행되어 왔던 이온원들을 시간적으로 되짚어 보면서 현재까지의 성과와 문제점, 그리고 앞으로의 개발 방향에 대해 논의하고자 한다.

  • PDF